This SKU table contains a list of all SKUs available for the product. You can filter the list of items shown by selecting attributes.
Description
Bass Pro Shops Frog Gig Spear or Fish Spear
Bass Pro Shops® spear prongs are hardened spring steel with well-defined barbs and carefully ground points, permanently welded to a hefty steel socket. Baked enamel finish. Color may vary.
Rated 2 out of
5 by
Nasby from
Fish spear for small fish or frogsI ordered 8 of these because I gig flounder and also make and sell gigging lights and spears. Unfortunately, the picture of these spear tips looked good, but the actual dimensions were not specified. Although 5 tines is good, they are only 3 1/2 inches long and the entire width is just over 3 inches. I used to use tiny spears like this, and on one trip it cost me the biggest flounder of my life - because the spear was too short to go completely through the fish, and it swam off (and pulled me over). Now I only use a 5-pronged spear with tines that are at least 5 inches long. I will try to sell these to novice giggers, but I will never use one - or order any more. Advertised as a frog gig or for small fish, they probably are OK.
Date published: 2019-08-19
Rated 3 out of
5 by
Dewm from
Cheap and bad qualityI bought this for my son and he came home mad because he missed and hit a bucket at the bottom of the pond and the prongs came loose and then he stuck the end in the ground and when he pulled it out he said the 2 prongs on the side stuck in the ground and there was no return address in package.
Date published: 2019-01-18
Rated 1 out of
5 by
Gladesaddict from
JunkGot the gig for tilapia and first time of use 2 of the times folded over. Tried to stick the fish a second time and fish pulled off. Times need to be stronger and better barbs. Luckily it was only $6
Date published: 2017-07-10
Rated 1 out of
5 by
Joosh from
Wouldn't trustFell apart right away
Date published: 2016-07-05
Rated 2 out of
5 by
Gilbert from
Not durable but cheap and sharp.I haven't tried the fish spear, but I can tell you the frog spears arent very good. They are low quality and after a few good uses, the tines will bend and eventually break off. The barbs are also a little too small so frogs will come off. Hit a couple rocks and the sharp ends bend. On the plus side, they are cheap to replace and are pretty darn sharp. If you are going to use them, always have a replacement spear head with you just in case.
Date published: 2015-07-07
Rated 5 out of
5 by
MARTY385 from
Snake Removal GigVery handy pest removal tool when unwanted (snakes) visitors are lurking around the house. Quickly attaches to a broomstick. If you can reach them with the Gig, they are not getting away.
Date published: 2015-07-03
Rated 5 out of
5 by
lobsters2003 from
fav15Great product! works just like advertised. Will buy more of this product.
Date published: 2015-05-31
Rated 5 out of
5 by
FrogMann from
Super strongThese spear heads are top grade. No junk here. Not only smoking a frog with ease. We even had to use them a few times as push poles. And didn't even roll the points down. Will buy again. IF I EVER BREAK THESE.
Thank you for choosing Bass Pro Shops. According to the manufacturer, the dimensions for SKU 261842 are 6-1/4" x 3" and it weighs 5.1 oz.
Answered by: BPSProductSpecialist8
Date published: 2019-01-08
so im looking to get a spear for sucker spearing is this a good spear
Asked by: trevorrad
This item would be adequate to use for sucker spearing.
Answered by: BPSAnswers14
Date published: 2018-04-12
I m looking for gigs to fish for sucker fish
Asked by: Frank4035
You may use this for Sucker fish.
Answered by: BPSAnswers14
Date published: 2018-04-12
Does the Five prong fish spear come with a shaft
Asked by: Millerthefishkiller
No, the fish sper does not come with a shaft.
Answered by: CommunityAnswer
Date published: 2017-05-31
How thick are the actual spears to the fish spear?
Asked by: Jakiepoo
Per the manufacturer, here are the dimensions.
261842 --- 5.1 OZ --- 6-1/4" x 3"
261843 --- 1.4 OZ ---- 5-1/4" x 1-1/4"
261844 --- 1.5 OZ ---- 5-1/4" x 1-5/8"
261845 --- 1.7 OZ ---- 5-1/4" x 1-5/8"
Thank You!
Answered by: BPSResource5
Date published: 2018-03-29
Shaft hole diameter?
On the 5 Prong Frog Spear, what is the diameter of the hole to place your gig handle in?
Asked by: AfromKY
i used a long broom handle off of a push broom so bout a broom handle
Answered by: ricej
Date published: 2017-05-31
How long is the "fish" gig?
Asked by: Chase4444
Thank you for the question. The fish spear is 6-1/4" x 3".
WARNING: Cancer and Reproductive Harm -