This SKU table contains a list of all SKUs available for the product. You can filter the list of items shown by selecting attributes.
Description
Tuff Coat Epoxy Primer Kit
Tuff Coat™ Epoxy Primer kit is an excellent water-based, two-component epoxy primer that's designed for use on concrete, wood, fiberglass and painted areas. This primer works well on extremely moist surfaces, making it ideal for docks, boats and seawalls. However, the primer may take slightly longer to cure when used on extremely moist areas, and it should not be applied if temperature is at or below 40Á Fahrenheit. One quart will cover approximately 62 square feet. You will need one quart of primer per one gallon of coating. Can be applied with rollers, brushes or sprayers. One quart each of part A & B=one application. Coverage - 1 qt. kit = up to 62 sq. ft.
Recommended for fiberglass, wood, concrete and previously painted surfaces
Works well on extremely moist surfaces
Ideal for docks, boats and seawalls
Dries to a clear finish
Mix with a drill type paint mixer (recommended)
NOTE: Tuff Coat Epoxy Primer Kit is designed to be used in conjuction with Ultra Tuff Tuff Coat Coatings and Roller Applicators. Tuff Coat Rubberized Non-Skid Coating sold separately and can be found through item search for number 1218146. Tuff Coat MP-10 Metal Primer sold separately and can be found through item search for number 1315397. Tuff Coat Textured Roller Applicator sold separately and can be found through item search for number 1218203.
Notice--Hazardous Material.Hazardous Material. Must ship ground only. Not eligible for expedited shipping. Contiguous 48 states only. A physical address is required for delivery. --- Even though you are able to checkout with this item, it will be removed from your order if shipping to a restricted location.
Notice--Dropship.Item(s) will ship directly from manufacturer; delivery options and/or shipping upgrades and delivery tracking are unavailable. Standard shipping is 10-14 business days. 48 contiguous states. Item is not eligible for ship-to-store delivery. A street address is required for delivery. --- Even though you are able to checkout with this item, it will be removed from your order if shipping to a restricted location.
Notice--LTD QTY Return Shipping.LTD QTY - In the event you wish to return this item, due to regulatory requirements, please contact customer service and we will provide the special shipping label and instructions required for the return of this item.
Proposition 65 Warning
{"notices":[
{"notice": "<b>Notice--LTD QTY Return Shipping.</b></br>LTD QTY - In the event you wish to return this item, due to regulatory requirements, please contact customer service and we will provide the special shipping label and instructions required for the return of this item.","catentryIDs" : "92004"},
{"notice": "<b>Notice--Hazardous Material.</b></br>Hazardous Material. Must ship ground only. Not eligible for expedited shipping. Contiguous 48 states only. A physical address is required for delivery. --- Even though you are able to checkout with this item, it will be removed from your order if shipping to a restricted location.","catentryIDs" : "92004"},
{"notice": "<b>Notice--Dropship.</b></br>Item(s) will ship directly from manufacturer; delivery options and/or shipping upgrades and delivery tracking are unavailable. <strong class=~red~> Standard shipping is 10-14 business days.</strong> 48 contiguous states. Item is not eligible for ship-to-store delivery. A street address is required for delivery. --- Even though you are able to checkout with this item, it will be removed from your order if shipping to a restricted location.","catentryIDs" : "166316"}
]}
Reviews
Rated 5 out of
5 by
randy11599 from
Very good productI applied it to a fiberglass boat and it adhered to it great. It had a nice finish also.
Date published: 2019-06-21
Rated 5 out of
5 by
firecracker9 from
Best product for the undercoatI am very satisfied with the primer and epoxy products.It was very easy to apply and with it being a water based product,it was a breeze to clean my rollers and brushes.
Date published: 2012-08-28
Rated 3 out of
5 by
Gldoss from
Good product with the right instructionsI received this product , it comes in a 2part mix , resin and hardener, the directions on the product were somewhat confusing to follow about mixing so I followed the mixing ratio instructions, which turned out to be the wrong way to mix this product , I applied it as instructed but because the ratio was wrong it did not cure right, I contacted the tuff coat co. Directly who in turn told me that the ratio was wrong and I had to remove the product completely off my boat, which took a great deal more scraping and sanding. The Tuffcoat co. Sent me a new batch of primer with the correct instructions on the cans, and the end product worked out great. If you use this just mix it one to one, that is the correct way to mix it.
Date published: 2012-04-02
Rated 4 out of
5 by
jimmywt from
Works wellUsed the epoxy primer before applying the Ultra Tuff Coating on fiberglass coated wood. Easy to mix, spreades well but when mixed goes on as an off white color and dries clear. Did not know that at first and thought I was not covering well but discovered different later. Remember, dries clear!!
Date published: 2011-04-11
Rated 5 out of
5 by
snowbird from
great stuffPrimer is absolutely necessary to get a good bond between the deck and the non-skid. Areas where I tried a test without primer did not adhere as well. Sanded , applied primer to entire deck of my ProLine and then applied non skid, it has been on there 7 days and is impossible to scrape off. Only negitive is that it isn't clear, just a little off color, a good tape job will cure that. Just get the right color paint, sand is actually a nice light tan color, so check before you buy.
Is this product tough enough to coat the bottom of homemade kayak for protection against going over rocks etc? Is it stronger than regular paint?
Asked by: Karlito
Can this be used on aluminum ?
Asked by: chaz2
The Water-Based Epoxy Primer CP-10 is for concrete, wood, and fiberglass. You will need MP-10 would be for aluminum or steel. Thanks
Answered by: BPSResource7
Date published: 2017-06-01
how long can you wait to topcoat w/ ultra tuff
I have coated the plywood with CP10. Is there a timeline as to when you have to coat with ultra tuff. I will have about a week from the time the cp10 was put down to when I get time to apply tuff coat. The wood is in a heated garage.......
Asked by: Moby
CP-10 takes slightly longer to cure, but is by far our best primer for concrete, wood and painted surfaces.
Drying Schedule @ 20 mils wet @ 50% RH, 72 degrees F
To touch: 1 hour maximum
To top coat: 1-2 hours
To cure: 24 hours - 5 days for full chemical
Answered by: BPSResource7
Date published: 2017-06-01
is this waterproof
Asked by: bassmaster1999
Yes, this is waterproof.
Answered by: BPSResource3
Date published: 2017-06-01
Is this a two part system? I don't see the other part in the picture.
Asked by: Wallman67
Yes and mix it per the directions, it is absolutely necessary if you want a good bond.
