This SKU table contains a list of all SKUs available for the product. You can filter the list of items shown by selecting attributes.
Description
T-H Marine Thru-Hull Fittings
Made of the highest quality virgin material, all materials are UV stable to provide long-term good looks and trouble-free hose connections. Maximum hull thickness for straight fittings is 1.25".
Rated 3 out of
5 by
BrazosRiverTom from
Difference in sizesThe 1 1/8th size is very good. I did not know what size I needed so I ordered both.
The 3/4 size is junk. The threads are very course making the actual tightening of it subject to coming loose with ease. The larger one has fine threads so you should be fine with that.
I would look else where for the smaller size with fine threads. Which I am doing and ordering that part again.
Date published: 2017-12-09
Rated 5 out of
5 by
Fish50plus from
Works GreatBought this 1 1/8" thru hull fitting for my 1200gal. Bilge Pump. Easy install and has been working great. I recommend it.
Date published: 2017-09-07
Rated 5 out of
5 by
MountainMan21 from
Works greatWouldn't use below the waterline but works great for my live well drain.
Date published: 2016-04-26
Rated 5 out of
5 by
noshite from
GreatGreat service fast delivery. Product as described.
Date published: 2015-08-28
Rated 5 out of
5 by
bigfishken1 from
If you must!!!!If drilling a hole in the hull is necessary, this is a great fitting to use.
Date published: 2015-04-04
Rated 5 out of
5 by
mjmtss from
Worked WellProduct was as described. Worked well, no issues at all.
Date published: 2014-10-29
Rated 5 out of
5 by
Fetherling from
Repair partsI rebuilt all my live well components this year all new pumps hoses and valves. I found a broken part. I needed it in a hurry, so I called Bass Pro and had it in 2 days to complete my project. It was the right one and I got it fast. Fishing the next day. They follow through.
Date published: 2014-04-08
Rated 5 out of
5 by
happyCrappieslayer from
T-H 90 Degree thru hull fittingWish ya'll offered one that measured 1/2' at the bend & threaded end, while accepting 3/4" ID hose. But ya'lll don't, so be prepared to increase 1/2 hole to 3/4". OEM hole size on my procraft was 1/2"
Thank you for choosing Bass Pro Shops. SKUs 501455 and 501456 are 90 degree.
Answered by: BPSProductSpecialist8
Date published: 2017-12-09
What size would I order to insert a 1 inch plug?
Asked by: LivewellDummy
1 inch.
Answered by: bigfishken1
Date published: 2017-06-02
what is the maximum hull thickness for the 90 degree fitting?
Asked by: ready2fish2
Flange diameter: 1 1/2"
Total Overall Length: 2 1/2"
Total threaded portion: 1"
Hose I.D.: 3/4"
Answered by: BPSResource7
Date published: 2017-06-02
What is the required hole diamter for the threaded portion ?
The hull has a 1-inch hole and I do not want to redrill it.
Asked by: cope
Maximum hull thickness for straight fittings is 1.25". You would need to redrill.
A
3/4" hose inner diameter
1-3/4" flange diameter
1-1/16" installation hole diameter
B
1-1/8" hose inner diameter
2" flange diameter
1-3/8" installation hole diameter
C
1-1/2" hose inner diameter
2-7/8" flange diameter
1-7/8"-2" installation hole diameter
Answered by: BPSResource7
Date published: 2017-06-02
My hull is 2-1/4" thick. Where can I get a Thru-Hull fitting for this thickness?
Asked by: Steve104
Try to contact T-H Marine or search online.
Answered by: BPSResource7
Date published: 2017-06-02
Can this be used below the waterline?
Asked by: KidCatfish
Yes
Thats where i'm using mine it fedds my live well
Answered by: tripleL
Date published: 2017-06-02
would this go where the drain plug is then u attach a hose to bail out the boat?
Asked by: bassfisher56789
I must be missing something here,...just remove the drainplug once the boat is out of the water to drain it. If the boat is still in the water and you can reach the drain plug, pull it out and run the boat forward and the boat will drain, then replace the plug.
