This SKU table contains a list of all SKUs available for the product. You can filter the list of items shown by selecting attributes.
Description
Looking for attractive marine hardware? This Anchor Handle Lid Lock from T-H Marine fits aluminum, fiberglass and carpeted lids. Features include a sure grip two-finger handle, a gasket for smooth surface applications, a toothed and Double-D shaped mounting for carpeted lids, a waterproof O-ring, a stainless steel stem, and powder-coated steel pawls - both straight and offset. Single hex nut installation is quick and easy. Mounts in lids up to _" thick. Installs into a 2-3/8" to 2-1/2" hole. Made in USA.
For aluminum, fiberglass and carpeted lids
Sure grip two-finger handle
Gasket included for smooth surface applications
Toothed and "Double-D" shaped mounting for carpeted lids
Waterproof O-ring
Stainless steel stem
Powder-coated steel pawls - straight and offset
Single hex nut installation
Mounts in lids up to _" thick
Installs into a 2-3/8" to 2-1/2" hole
Universal replacement for all T-H Marine or Perko®- lids
Web ID: 100737
Reviews
Rated 5 out of
5 by
Jr3dd3n3 from
As expectedThis product performed as expected. This was to replace a factory G3 latch that was broken. Install took maybe 2 minutes.
Date published: 2016-06-14
Rated 3 out of
5 by
Longshooter from
Works OKI am replacing my boat latches with these a couple at a time. They work OK but I have had a T-Handle break in the past when I did not put it back in place and accidentally stepped on it. One of the four that I have purchased recently was a bit sloppy loose not as tight in working action as any others I have purchased. I am still going with them because they are available and I can match them buying only a few at a time. I fall a bit short of recommending to a friend. It would be mentioned as an option. My experience with them has been good overall, but they make better ones but they are more pricey. Good enough for me for the money.
Date published: 2016-06-06
Rated 4 out of
5 by
oldman64 from
worksthis item worked just as described. i bought two, but only needed one for now. i just think it should come with two keys, and that is the reason i gave just 4 stars.
Date published: 2016-05-26
Rated 5 out of
5 by
JBass15 from
Excellent product for intended useProduct worked great for intended use right out of the box and fit existing lid cut out.
Date published: 2015-07-29
Rated 5 out of
5 by
Bjulian11 from
Excellent productEasy installation and gets the job done. Never have to worry about the cord breaking and pulls the trolling motor up with ease.
Date published: 2015-07-20
Rated 3 out of
5 by
1shepherd from
ok locksnot like standard equipment but get the job done. keys are Cheesy.
Date published: 2015-05-28
Rated 4 out of
5 by
OldSarge from
Replacement locksThe Whitecap locks on my new Nitro Z8 failed quickly. Almost all of them lost the ability to lock. Replaced them with these T-H locks. I like the new locks because the locking mechanism is simple and positive. Security is only situational, however. Anyone who owns the same T-H locks has a key for your T-H locks; but unless one looks carefully, they look like the original White caps on a Z-8. Only a dishonest guy walking around with a T-H key looking for T-H locks represents much of a threat. I used the cast bronze locking bars from the original Whitecap locks with the T-H locks... they are better than the thinner aluminum bars that come with the T-H. Overall, the T-H locks are good for my situation and were reasonably priced. [This review was collected as part of a promotion.]
Date published: 2014-10-07
Rated 5 out of
5 by
JT57 from
Garmin echo 50SThe easiest ever. I have had all makes and brands going back to the old Lowrance Green Box. Nothing has come close to the ease of use, definition, and overall clarity than this Garmin. I would highly recommend the Garmin products.
Is there a bracket I can get to make it two and a half inch lock fit a 2 and 3/8 hole
Asked by: Miss Ruth
Thank you for your question. Per the manufacturer, the T-H Marine Anchor Handle Lid Lock “Installs into a 2-3/8" to 2-1/2" hole”. See the link below for more information from the manufacturer.
https://thmarinesupplies.com/products/anchor-handle-lock
Answered by: BPSProductSpecialist15
Date published: 2018-07-10
Extra long cam/pawl?
My boat requires an extra long offset pawl. How do I get the correct size?
Asked by: Jam6885
Unfortunately we do not carry the model that will fit your application.
Answered by: BPSAnswers4
Date published: 2017-06-01
will they fit a 2 3/8" hole for sure?
Does anyone know for a fact that this lock will fit a 2 3/8" hole? I have looked on many sites and they only show 2 1/2".If it does then I have finally found the correct one.
Asked by: wmm5882
It should work just fine.
Answered by: bfire
Date published: 2017-06-01
Will these fit a 94 ranger 361
Asked by: flyfishdwt
It works just fine on my 1997 Ranger. Take your old latch out and measure the hole opening. If it is between 2-2 1/2", then it should work just fine.
Answered by: bfire
Date published: 2017-06-01
7 storage lock keys
Hi
If I purchase 7 of them and I would like to have one same key for all 7 storage locks. Thank you
Asked by: Rapala77
They are all keyed the same. One key will fit any other latch.
Answered by: eseals
Date published: 2017-06-01
special request
can I get the nut that holds the lock tumblers from falling out? I have the anchor handle lid locks and I lost one of the nuts somehow? I don't want to replace the lock because of having different keys.
Asked by: Dbuckowens
Hardware store. Be sure to use liquatite to keep them in place
Answered by: Beamer69
Date published: 2017-06-01
What is the T-handle made of?
Asked by: hwyman
Some type of light weight metal alloy I believe.
Answered by: bigfishken
Date published: 2017-06-01
Do I have to drill new larger holes to install in 99 Triton
