Notice--Bulk Item Packaging.Please note that this item ships in its own packaging, so the contents may be identified.
{"notices":[
{"notice": "<b>Notice--Bulk Item Packaging.</b></br>Please note that this item ships in its own packaging, so the contents may be identified.","catentryIDs" : "143271,143272,143273"}
]}
This SKU table contains a list of all SKUs available for the product. You can filter the list of items shown by selecting attributes.
Description
Reviews
Q&A
The StingRay™ StarFire Hydrofoil stabilizer puts your boat up on plane fast, reduces bow rise, eliminates chinewalking, stops porpoising and cavitation—all while adding true stabilization. Installation is fast and easy thanks to StingRay's No-Drill installation. Get the best top end speed, the best fuel savings, and performance that outshines the competition every time!
No-Drill™ installation
Best top end speed
Best fuel savings
Simplest, quickest installation
Web ID: 12091805082613
Rated 1 out of
5 by
Flying addict from
Stingray Starfire HydrofoilLooks good
Worked on first try but it was an expensive experience CA$ 99 as the hydrofoil came loose and lost it in the middle of the lake. This was my first run with it. Felt a big change as the boat came into plane easy but the no drill advertisement can't be good! The bolts provided as mentioned is just for anti theft and not for securing the hydrofoil.That's my biggest mistake not to install the bolts because i don't want to drill a hole on my stab fin. Not only that I lost the stab, now I have a scratch on my fins because of the retaining nut rubbing it when the stabilizer came loose and went missing. Followed installation instruction to the tee and applied locktite on the retaining nuts and still came loose. I installed this on my 2006 Evinrude 60 hp E-tec. If you plan to buy one make sure you bolt it on. As for me I will live w/o it as I don't want to have holes on my motor.
Date published: 2018-08-16
Rated 1 out of
5 by
ND101 from
Does not fitOne size does not fit all. If you plan to install this on a new 60hp Mercury 4 stroke, plan on a few hours, a dremel tool and a big rubber hammmer. The hydroil slips right on, it requires lots of sweat to replace the trim tab.
Date published: 2018-06-12
Rated 4 out of
5 by
Gunner7848 from
HydrofoilThis will not fit on a 2018 Mercury 50 HP 4 stroke I have used them before and they work great but unfortunately I can not put the torque tap back on. Will be taking this back. Also noticed that I was not the first one to try this item looks like it has been returned
Date published: 2018-04-25
Rated 5 out of
5 by
fishrmn1961 from
I was skeptical of the no drill mountThe hydrofoil works great. The boat gets on plane much quicker. I have one of the older (drill mount) models on my old boat and I have been very happy with it. I was skeptical of the no drill mount but I put this on a new boat and did not want to drill the new motor. I had to cut away a little material from the inside center of the hydrofoil to make it fit snug on my 75 hp Mercury. I took the boat on a 7 day camping & fishing trip and checked the hydrofoil daily. It stayed snug and didn't move at all.
Date published: 2017-07-02
Rated 5 out of
5 by
Superdave1122 from
Works like a charm!Installation was a breeze and it got our 20' Procraft on plane in less than half the time. Very happy with the performance. Cannot yet confirm improvement in gas mileage.
Date published: 2017-03-05
Rated 4 out of
5 by
BG14 from
Stingray hydrofoilI have this on a optimax 115 deckboat. It helped to plane off faster and at slower speeds. It did good but I was hoping for a bit more. The install was fast and easy
Date published: 2016-10-11
Rated 1 out of
5 by
63fish from
stingray starfireAfter reading all the positive reviews on this product I could wait to try it.Boy was I disappointed put this on my 2012 G3164c with 2012 50hp merc 4stroke this piece of junk did the absolute opposite of what it was supposed to do. I normally run about 5800rpm with this on the best I could manage was5100 rpm Lost 7 mph AND propisited terribly when trying to trim engine up. Not to mention the set screw bushing came loose before it was even tightened. So I drilled it on the motor complete waste of time and money would absolutely not recomenned this product even to an enemy.
Date published: 2015-08-23
Rated 1 out of
5 by
1baines from
stingray starfire NO DRILLtried to install this product on a 2010 Yamaha 40hp
set screw on port side went over the top of the fin,
starboard side stripped out before it got any where
50 miles to Basspro to purchase, 50 miles back to Basspro to return, 200miles total
what are the orange plastic strips that came with my starfire used for?
Asked by: tim r1
Does it work well on a I/O?
Asked by: rdrjm531
how does it install
Asked by: ronrob
The following video is provided on the manufacturer's website to assist in seeing how it is attached without drilling holes.
https://www.youtube.com/channel/UCSQaa5qrppfknoTBh-Fy8VA
Answered by: BPSResource19
Date published: 2018-03-20
What are the orange strips for? packaging mistake? Its a starfire I installed on my 40HP Merc.
Asked by: Bisc
how does it stay on with out drilling ?
Asked by: keywest1520
The following video is provided on the manufacturer's website to assist in seeing how it is attached without drilling holes.
https://www.youtube.com/channel/UCSQaa5qrppfknoTBh-Fy8VA
Answered by: BPSResource19
Date published: 2018-03-20
I have a 60 hp merc can I use this unit on it
Asked by: gui 67
Thank you for choosing Bass Pro Shops. Yes, it should work for your motor. They are rated for 40 to 300 HP.
Answered by: BPSProductSpecialist8
Date published: 2018-01-08
will this fit 2016 115 mercury four stroke
Asked by: jake1961
Thank you for choosing Bass Pro Shops. Yes, it should work for your motor. They are rated for 40 to 300 HP.
Answered by: BPSProductSpecialist8
Date published: 2018-08-30
Will this fit a 15 hp motor?
Asked by: Sarath
Thank you for choosing Bass Pro Shops. The StarFire Hydrofoils are rated for 40 to 300 HP. The link below will take you to the StingRay Speed-XP Hydrofoil Stabilizers for Boat Motors. The JR models are rated for motors below 40 HP.
http://www.basspro.com/shop/en/stingray-speed-xp-hydrofoil-stabilizers-for-boat-motors
