This SKU table contains a list of all SKUs available for the product. You can filter the list of items shown by selecting attributes.
Description
The dream of swapping accessories without damaging your boat is now a reality with the Stern Saver® Mini Transducer Mounting System. Its revolutionary bonding technology forms an incredibly strong bond to fiberglass and aluminum boats and allows you to install a mount for transducers and other boat accessories without even thinking about a drill. This unique transducer mount and accessory mount even covers and seals unsightly existing holes in your boat's transom, promoting a sleeker look and longer boat life by covering holes that can otherwise speed up corrosion and other harmful marine effects. Its 4-step installation makes mounting a breeze. Now with an even smaller footprint than the original, the Stern Saver Mini Transducer Mounting System takes your boat's customizability to the next level. Manufacturer model #: SS02.
Enhances your boat's customizability
Lets you mount transducers or other accessories without drilling holes
4-step installation makes mounting a breeze
Forms incredibly strong bond with fiberglass and aluminum boats
Covers and seals unsightly existing holes in your boat's transom
Web ID: 160930
Reviews
Rated 4 out of
5 by
GreenRino from
Good product, needs additional noteI followed the instructions and in the end it turned out perfect. A word of warning when using the adhesive. Mixing tips don’t mix the first adhesive well so make sure you squirt some out before you start filling the wells. Also, there is a small rectangle piece in the plunger handle you need to remove or you can’t plunge all the way. They should add a note about that. I forgot to remove it (it’s not noted in the instructions) and about 1/2 way through the well fill I had an uneven press on the plunger and the adhesive wasn’t mixing properly. I noticed and scraped out the unmixed adhesive removed the piece then finished filling. Turned out perfect and super strong. Great option other than drilling into the transom.
Date published: 2019-08-02
Rated 5 out of
5 by
Boop from
Works as advertised.Works great, you could buy the starboard and epoxy and do the same thing but the all in one package is the way to go, beats drilling holes in the transom and better than a poke in the eye.
Date published: 2018-06-05
Rated 5 out of
5 by
Kwsh from
Excellent ProductI used a stern saver on my aluminum xpress bass boat and my Ranger bass boat with great results. The stern saver has been on the xpress for two years and on the Ranger for 1 year with no issue. Even on a 70+mph boat this thing holds strong. Would recommend this product to anyone looking to install a transducer without drilling into their boat. The supplied epoxy has a mixing tip that must be used for the epoxy to cure properly. I would rate this a 5 out of 5 stars.
Date published: 2018-02-20
Rated 1 out of
5 by
4McCoys from
Messed up gel coat!I Installed it just as directions said but I waited 48 hrs before I mounted my Transducer. The stern saver pulled right off, now my gel coat is all scratched up with hard epoxy in places. Wasted $30 bucks.
Date published: 2017-12-30
Rated 5 out of
5 by
MJet65 from
Transom SaverGreat product, kept from drilling holes in my boat. Does great job holding on transducer
Date published: 2017-08-02
Rated 1 out of
5 by
Fredwes from
Doesn't workI bought 2 of these. I put them on exactly how the directions described. It says let them dry for 5 hours with tape holding them in place. I let them dry all night. They fell off the next day. I don't even want to return them because they are a sticky mess.
The Stern Saver Mini Transducer Mounting System works on fiberglass and aluminum boats including Jon Boats. Thank you for your question.
Answered by: BPSResource3
Date published: 2018-08-07
Is the stern saver mini able to hold the weight of a lss-2 down scan transducer? It's close to 2 lbs.
Asked by: xXHutchXx
does this product come with adhesive to mount it
Asked by: nufee
Thank you for choosing Bass Pro Shops. Yes, it comes with an installation kit.
Answered by: BPSProductSpecialist8
Date published: 2018-04-03
Will this work with the Garmin Striker 4 Plus transducer?
Asked by: ProSkiff19
Thank you for choosing Bass Pro Shops. Per the manufacturer, it is great for smaller, lighter weight transducers and for applications where space is limited. It is not recommended for larger or side-imaging transducers.
Answered by: BPSProductSpecialist8
Date published: 2018-04-03
will this work with humminbird si transducer XHS 9 HDSI 180 T
Asked by: Rhall14
Thank you for choosing Bass Pro Shops. Per the manufacturer, it is great for smaller, lighter weight transducers and for applications where space is limited. It is not recommended for larger or side-imaging transducers.
Answered by: BPSProductSpecialist8
Date published: 2018-04-03
Side Scan Transducer
Does anyone have experience using this with a lowrance lss2 transducer. The mini is only one that fits on my boat and I don't want to drill holes.
Asked by: fishermandude13
Thank you for your question about the Stern Saver Mini Transducer Mounting System. According to the manufacturer, the Mini Stern Saver is not intended for large transducers like the LSS2. The Stern Saver Original is the product to use for larger transducers. Unfortunately, BPS no longer carries the Original.
Answered by: BPSResource3
Date published: 2017-06-01
Will this fit on the step back transom on newer Pro Team 175txw without cutting it
Asked by: fishbowl
The measurements for this product is 3.5" x 2.5" x 0.75".
