This SKU table contains a list of all SKUs available for the product. You can filter the list of items shown by selecting attributes.
Description
Reviews
Q&A
The Leupold® Mark 2® IMS® (Integral Mounting System) is designed specifically for mounting standard riflescopes to AR-style tactical rifles with Picatinny rails. The Mark 2 IMS system cantilever design mounts directly to the firearm's Mil-Spec 1913/Picatinny rail to raise the scope and push it forward, eliminating the need for risers or specialized optics with shortened eye relief. The Leupold Mark 2 IMS Integral AR Mounting System is constructed from aluminum with a hardcoat, anodized matte black finish, and secured with steel crossbolts. Made in USA.
Designed for mounting standard riflescopes to tactical rifles
Eliminates the need for risers or optics with short eye relief
Constructed from aluminum with a hardcoat, anodized finish
Secured with steel crossbolts
Web ID: 15030915464110
Rated 5 out of
5 by
Spiderleggs from
Leupold, very good productLeupold, great mount and Leupold scopes made in the USA.
Date published: 2017-08-22
Rated 5 out of
5 by
Hakbe from
Scope mountGreat scope mounts. Used on an AR build I did and worked perfectly. Will buy again when I do another build.
Date published: 2017-08-15
Rated 5 out of
5 by
BOBDK from
EXCELLENT FOR THE AR-15!!Made for use with the Leupold AR-15 Mod 1 riflescope and mates perfectly!! Very solid with no variations after 500 rounds!!
Date published: 2017-04-25
Rated 5 out of
5 by
Eliasck from
SolidSolid, lightweight, slim. So far, so good.
Date published: 2017-04-25
Rated 1 out of
5 by
DETShooter from
Broken screwWhen initially mounting the assembly to the rail of my AR one of the screws broke off when I was tightening the keeper nut. I was using a torque wrench set well below the recommended setting of 65 inch pounds. Mine was set for 45 inch pounds.
I like the mount but this is unacceptable. I can't find replacement screw from any typical parts sites. Have contacted Leupold but have not received a reply.
Be careful tightening the keeper nut if you purchase this mount.
Date published: 2017-04-03
Rated 5 out of
5 by
Chewelah from
Glad I bought itMy family bought me a Smith & Wesson M&P10 for my 60th birthday to help me with a pig problem at my ranch in Oklahoma. I purchased a Leupold scope and this mounting system. I sat in the truck and attached the scope and then attached it to the rail that was on the gun when I opened the box. 1st shot at 50 yds. was just a few inches off and with a little work it zeroed in a few. It was the easiest scope mount I had ever done. I've had it for 2 years and have been using it on the 4 wheeler in Oklahoma and now in E. Washington. It's been banged around and carried everywhere. The gun has stayed sighted in and I haven't had to readjust it yet. Other than re-sighting for different loads. That's saying a lot for me. The gun mounts on my ATV aren't setup for an AR and it tends to roll upside down which makes it less than stable. Given that I mounted the scope in the field and have been using it for a while and the gun is still incredibly accurate I can only say "Buy this product". I wrote this review while I was looking to buy another.
Date published: 2017-02-25
Rated 5 out of
5 by
300rummy from
Well worth the moneyThis is the only way to go. I had other scope mounts on my ar and had nothing but problems with them. Then I got this scope mount and that was the end of my problems. I should have never went cheap in the first place. This scope mount is well worth the money.
Date published: 2017-02-21
Rated 5 out of
5 by
wildoutdoorsman from
Great product great priceOne piece mount for your optic on an AR at a decent price, what's not to like.
I’m trying to purchase a mount/rings to fit a Diamondback 308 AR, and a scope 3x9x40. Is this the correct one piece ring mount? It’s a gift for my husband... So I need the scope and mount. Thank you
Asked by: Hosey
would this raise scope like a riser?
Asked by: john all
Thank you for your question. Yes, this eliminates the need for risers.
Answered by: BPSProductSpecialist9
Date published: 2018-07-29
Will a Nixon p223 scope adapt to this mount?
Asked by: Darn
Does this mounting bracket fit the Leopold VX-R rifel scope
Asked by: Craig 762
Will this mount work with the leupold vx 3i lrp 6.5x20x50 scope?
Asked by: Okieshooter77
Thank you for choosing Bass Pro Shops. The Leupold Mark 2 IMS Integral AR Mounting System will work with the Leupold VX-3i LRP 6.5-20x50mm Scope. You will want the mount that fits 30mm scope tubes SKU: 2200628. however due to the objective size of the scope you may need a riser to insure the objective end of the scope does not hit the firearm you are putting it on.