This SKU table contains a list of all SKUs available for the product. You can filter the list of items shown by selecting attributes.
Description
Reviews
Q&A
Use with Leupold® Dual Dovetail™ mount base.
Mount bases sold separately and can be found through item search at 38-864-827
Web ID: 11604
Rated 5 out of
5 by
tempdoug from
Only system i will put on anything, anymore.Simple, Strong, Solid, need i say more. Just a great mount.
Date published: 2017-02-04
Rated 1 out of
5 by
Jerbo from
bought these to mount my nikon scope to my omega.So when I started to put the scope on the rings & half way tighten the rings to set my scope I noticed that it scared the side of my scope. I have a nikon realtree xr muzzeloader scope 3x9x40. Then I noticed that the scope would not fit all the way to the bottom of the rings, there was a gap & if I would have tighten it all the way I really would have had a mess. My scope is a 1 inch & I made sure the rings were straight on the base which is a leupold base for the omega. I have all leupold bases & rings on all my guns & never had this problem.
Date published: 2017-01-06
Rated 5 out of
5 by
CZ04 from
Rock solidThey lock in place perfectly true and square . Really the best choice for magnum rifles.
Date published: 2016-12-21
Rated 5 out of
5 by
RockFarmer from
Best Ring/ Base Combination!In preparation for an upcoming Colorado Elk hunt, I recently mounted a new Leupold VX-3 CDS scope on my old post '64 M70 300 Win. Mag. I had trouble with other "Premium Brand" aluminum rings and bases. One ring when was not square with the bases when tightened. Another one piece ring/ base unit did not even fit my 1" scope tube properly. I dug deeper into the rings & bases in my collection and came up with a new Leupold Dual Dovetail Ring & Base set. What a pleasure to mount on the rifle and have everything be square, true and strong as all get out!
Date published: 2016-07-25
Rated 5 out of
5 by
northern echo from
Leupold DD ringsBought the dual dovetail rings to go with the leupold bases, excellent products all steel, fits like no other, rock solid only Leupold products for me,
Date published: 2016-03-25
Rated 5 out of
5 by
JROW from
Leupold Dual Dovetail Scope RingsExcellent item, especially with 50+ mm scope as it may be too close to rifle barrel.
Date published: 2015-10-26
Rated 5 out of
5 by
Scubapoip from
Great JobSince there ase so many combinations of rings and mounts on the market these days I contacted the call center to determine which rings would fit my mount and new scope. They were spot on with their recommendation. I received the rings two days faster than expected and they fit perfectly. Within fifteen minutes my scope was mounted and ready for the range.
Date published: 2015-04-10
Rated 4 out of
5 by
UPHunter2 from
good qualityGood product solid what you would expect from Leupoid. A bit pricey for a 22cal
What is the difference between these rings and the 54159 rings.
Asked by: HaroldP
HaroldP,
54159 is the part number for a DD Style, 1in diameter, high height, extension ring in a matte black finish. 49918 is the part number for a DD Style, 1in diameter, high height, matte black ring.
Thanks for choosing Leupold!
Answered by: 5764
Date published: 2018-02-23
Will these work for a 40mm scope
Asked by: Guy45
Guy45,
Generally, medium height rings will accommodate a scope with a 40mm objective lens on a traditional stocked rifle.
Thanks for choosing Leupold!
Answered by: 5764
Date published: 2018-01-18
What is the recommended torque for the ring screws?
Asked by: DaWuo
DaWuo,
I would recommend tightening those 8-40 ring screws to 28in/lb.
Thanks for choosing Leupold!
Answered by: 5764
Date published: 2018-01-17
Do this rings Fits in the base scope of the winchester mod 70? And these rings are for a 3-14x50 scope?
Asked by: Adam cortes
Is the listed ring height dimension from the top of the base to the center of the scope tube or from the top of the base to the bottom of the scope tube?
Asked by: yukonCornelius12345
yukonCornelius12345,
Ring height is measured from the top of the base to the center of the ring.
Thanks for choosing Leupold!
Answered by: 5764
Date published: 2017-12-22
I recently bought dual dovetail scope mounts and offset standard rings. I don't like the rear ring just sitting on top of the base. can I buy dovetail rings and use one on the rear for a solid mount?
Asked by: victhemailman
I am mounting your Vx-31 4.5 - 14 x 50 scope on an X-Bolt Stalker. What base and ring combo do I need?
Asked by: Hermann
Hello Hermann,
I would recommend our DD bases, part number 65413, and our DD 1in High rings, part number 49918, to mount that VX-3i 4.5-14x50mm to your Browning X-Bolt Stalker.
Thanks for choosing Leupold!
Answered by: 5764
Date published: 2017-12-06
I have a Savage 243 and have mounted the VX-1 4-12x40mm scope with the Duel Dove Tail Mount Bases. When attempting to zero in the scope I am unable to adjust down as far as I need to go. At 100 yds shot placement is approximately 3 inches low of center.
