This SKU table contains a list of all SKUs available for the product. You can filter the list of items shown by selecting attributes.
Description
Get your favorite rod back in action with the Fuji® Rod Tip Repair Kit. The kit includes three widely used rod tips (tube I.D. sizes 2.4mm, 2.8mm and 3.2mm), plus a tube of hot melt glue. Available in your choice of 2 finishes; black or silver.
Web ID: 16514
Reviews
Rated 5 out of
5 by
Randy1 from
Worked greatHard to figure out what size that I needed but one of the 3 fit my pole and was easy to install..
Date published: 2019-07-30
Rated 2 out of
5 by
MuskiePro from
Too smallThese are so small. yes I get I should order the correct size...but difficult to tell and the marketing makes it seem these are larger then standard bass "micro rods": If you are attempting to repair 8'+ muskie rods, these will NOT work. you'll need way larger than 8/64.
Date published: 2018-08-02
Rated 1 out of
5 by
rabbireed from
rod tip replacements
Date published: 2017-10-17
Rated 5 out of
5 by
whitetailkrazy from
An ABSOLUTE must when going on a fly-in!This kit had saved a couple of rods on a couple of fly-ins. I won't leave home without one!
Date published: 2017-07-26
Rated 1 out of
5 by
EP67 from
DisappointedI ordered this product thinking I was getting the glue and tips as the photograph depicts. However, the only thing I received was the glue. No tips were included.
Date published: 2017-07-17
Rated 5 out of
5 by
chief2 from
excellent productsimple cheap repair rod tips while fishing anyone can use it
Date published: 2017-07-15
Rated 1 out of
5 by
Humptous from
rod tip replacementNone of the tips in this set matched my rod. The rod is a Bass Pro Extreme rod. I was hoping the repair tips they sell would at least match the products they sell.
Date published: 2017-07-10
Rated 5 out of
5 by
ToyMan from
Works greatWe keep a package in the boat for our Canada trips, have used them several times and they come in very handy.
Thank you for your inquiry. Yes, these are the Fuji Hardloy guides.
Answered by: BPSResource11
Date published: 2017-06-01
Ultralight rod
I broke the top section of my browning superlight UL 5'2'' rod - would there be a tip in the package small enough to fit it?
Asked by: Walllsh
Approximately 80% of tips on existing fishing rods are either a P frame or the stronger UX type, so selecting a tip type is easy in the Fuji pre-packaged repair kits. They come in 3 variants of P frame with various sized tips and one in the UX style.
To repair a broken tip, simply match the ring diameter of the replacement tip to the nearest existing guide. Measure the diameter across the ring in the guide and choose the corresponding tip. These measurements are expressed in millimetres.
Next, determine the size or diameter of the tip sleeve you need by measuring the diameter of the blank about 1cm from the end. Tips come with a measurement called a tip pipe diameter. This is the measurement you should match to your blank diameter. For example a blank measurement of 3.6mm at 1cm from the end will mean you choose a tip with a tip pipe diameter of 3.6.
Once you have combined your ring size and tip diameter, which are referenced as 10/3.6 and means for example 10mm ring diameter and 3.6 tip pipe diameter, you can reapply a new one using a lighter and some Fuji hot melt glue on the end of the blank and slide the tip sleeve over the blank securely.
Answered by: BPSResource7
Date published: 2017-06-01
instructions for useing glue/lost them
Asked by: 8oclockdave
Heat the glue stick with a lighter and put ssome on the tip of the rod heat the tip and slide it on in alighnment with the other guides.
Answered by: Old Bass Wizzard
Date published: 2017-06-01
If i broke an inch off from tip to breaking point, would this product still work?
Asked by: Bassslayer34
Thank you for your inquiry! This rod tip repair kit would fix your rod in this circumstance.
Answered by: BPSResource16
Date published: 2017-06-01
You have the larger size?
I bought this kit previously, but the largest tip is too small (end of rod's been broken off). I've seen kits with larger sizes....do you have them?
Asked by: kwhites634
try this
262296
Answered by: takeemmac
Date published: 2017-06-01
does it come with the glue and rod tips
Asked by: ksfisherman10
Thank you for your inquiry. Yes, this kit does come with the rod tips and the glue.
Answered by: BPSResource11
Date published: 2017-06-01
Lost grommet insert out of rod tip. How do you get the old tip off?
I just need a replacement grommet, but I think you have to purchase a replacement tip with grommet. How do you get the old tip off without damaging the tip of the pole?
Asked by: Sockwash
heat with a lighter, twist lightly pull. you dont want to get it too hot just enough to melt the glue
