This SKU table contains a list of all SKUs available for the product. You can filter the list of items shown by selecting attributes.
Description
Do-It No Roll Sinker Mold
With Do-It® Molds, making your own tackle is easy. You save money while creating lures you can't find on the shelves. These precision molds guarantee no flash or trimming. The No Roll Sinker Mold features clean halves, no burrs, and no flashing.
Rated 3 out of
5 by
Jonathan1234 from
No roll sinkerswell I will say this ...its not made by bass pro but rather do it molds so bass pro is not to blame for the cheap construction of the handles and the pins (one bent in package) the handles fell off after the 3rd use!
Date published: 2017-07-26
Rated 5 out of
5 by
saryk from
good product thanksGod products thanks. ..
Date published: 2015-04-21
Rated 5 out of
5 by
dlrnh3 from
Great Product !Very easy to use! Made six pounds of sinkers on the day I received it.
Date published: 2013-05-22
Rated 3 out of
5 by
OldFisherman58 from
Sinker MoldI was looking for a sinker that I could use in the river and not roll down river. I have found it. However, using this mold was a task to learn. If anyone has some better ways of using it, please let me know. I had to heat up my lead to the highest temp to be able to make the smaller two sinkers but once I accomplished that, they came out complete. The rods going through the mold seem to be frustrating to remove. Should I remove them off the weights while in the mold or take the weights out then remove the rods? I have tried both but both are stubborn and hot to deal with. The sinker is what I've been looking for, the frustrations are not.
Date published: 2013-02-22
Rated 5 out of
5 by
dcasper111 from
great buy!Great item to own. Very durable. Has easy instructions to follow and finished product looks just like if You would buy a sinker in the store.
Date published: 2012-03-28
Rated 5 out of
5 by
BABYSNAKES from
Great purchaseIf you read the instructions and do exactly what they say you will be very satisfied with the end product.
P/S Instructions aren't always for DUMMIES.
Date published: 2012-01-23
Rated 5 out of
5 by
stumpPuller from
great moldI absolutely love this sinker for swift water catfish. The mold uses several small pins instead of the single long pin like the egg sinkers and they can be tough to get out. I modified a pair of needle nose pliers and it gets the job done. Well worth the money but alot slower if your used to casting egg sinkers. the handle to the pins sometimes gets in the way of my bottom pour lee pot but i've learned to work around it
Date published: 2012-01-22
Rated 5 out of
5 by
Archeryrob from
Great MoldI got the 1/2 - 1 1/2 oz mold and am casting the even the 1/2 oz one with hard reclaimed lead from shot and tire weights. The mold is large enough and wide enough inside to even use this scrap lead without thinning it.
Works great and makes nice jigs for tying your hair jigs.
WARNING: Cancer and Reproductive Harm -