Bohning Ferr-L-Tite Cool Flex Carbon Shaft Adhesive

$7.49

Bohning Ferr-L-Tite Cool Flex Carbon Shaft Adhesive is rated 4.1 out of 5 by 9.

Learn More

FREE Ship to Store

Notice--Hazardous Material.
Hazardous Material. Must ship ground only. Not eligible for expedited shipping. Contiguous 48 states only. A physical address is required. --- Even though you are able to check out with this item, it will be removed from your order if shipping to a restricted location.

Size:12 Gram

Size

Model Number

Quantity

Price & Availability

Additional Info

Click to display additional attributes for the product

12 Gram

1308

Quantity

Invalid quantity

$7.49

SKU:1798573

Check Store Inventory Check Store Availability

Change stores

Add to Cart

Add to Wish List

Size

12 Gram

Model Number

1308

Bohning Ferr-L-Tite Cool Flex Carbon Shaft Adhesive

Click to display additional attributes for the product

Online Availability

In-Store Availability

Check Store Inventory Check Store Availability

Change stores

$7.49

SKU:1798573

Quantity Quantity :

Invalid quantity

Add to Cart

Add to Wish List

Size

12 Gram

Model Number

1308

Description

Reviews

Q&A

Bohning Ferr-L-Tite Cool Flex Carbon Shaft Adhesive offers low-temp hot melt for carbon shafts. Instant full strength setup in cold water. Easy to apply; heat reversible; 12 gram stick will glue approximately 144 inserts.
Manufacturer model #: 1308.

Easy to apply
Heat reversible
Low-temp hot melt for carbon shafts

Web ID: 10212209

Rated 5 out of 5 by Thurston from Excellent Product Used this to build my last several dozen GT and Beman arrows. It works the best IMO. Make sure you prep and clean your arrows after cutting them to length and you will have no problems. I love the no mess and the fact that if I jack something up, I can heat it up in hot water and remove or index the insert. You definitely can't do that with other glues. Introduced this product to my hunting buddies and they are now exclusively using it, as well. They love that fact that they can index their broadheads to their vanes so much, that some have actually removed their old inserts and re-inserted them using this glue.

Date published: 2015-08-23

Rated 5 out of 5 by keck from Works good. Glued my inserts with this cool flex back in the spring. I have hundreds of shots without any problems what so ever. I really like that you can dip them in hot water to line your broadheads and vanes up then run them under cold water to set them back up. I have done this and it worked perfect. [This review was collected as part of a promotion.]

Date published: 2014-10-21

Rated 5 out of 5 by TThurston from Easy Been building my own arrows for a while now and of course I'm always looking for a better product that gets it done right with little hassle and is reversible, in case I goof it up. I found what I wanted in this product. I place the insert (brass or alum.) in a chewed up field point that I clamp down in vice grips. I then set it hovering over the stove burner for a few minutes to get WARM (not hot). Rub the insert on the stick and watch it melt and glaze over the WARM insert. Let it hover over the stove for a minute or two again and press while turning it in the carbon shaft. Wipe off the excess, press down on a block of wood to make sure it is seated, dip for a minute in a cup of ice water to set and you are done. Broadhead indexing or insert removal is easily done by placing the point in some water that had been boiled and pulling/turning. I have yet to have a insert get loose or come out, using all kinds of targets. Don't forget to clean out your shafts. (Mission VXT, 70lbs, 30.5 dl, 302fps, Beman ICS 300's at 431grs.). Aim small...Miss small!

Date published: 2014-03-26

Rated 4 out of 5 by NathanH from So far, so good This stuff is easy to apply, easy to clean up. It's perfect for fixed broadhead applications. It can be easily reheated for broadhead adjustment. Haven't used it long enough to give it a 5 star rating. But I'm very happy with it so far.

Date published: 2013-10-11

Rated 4 out of 5 by IABOWHNTR from Only hot melt glue I will ever use Most carbon arrows do not recommend the use of hot melt glue first off, but this is so much different than others. At no time do you need to heat the Insert while in the shaft, heat the insert, apply the glue to insert, put insert in arrow then put it in a cup of ice water. To long up your broadhead you do not need boiling water, just run your sink on hot water and let the front of arrow sit under the how water for about a minute then rotate insert to were it needs to be. Always run the front of arrow under cold water or sit it in ice water after any heating or it will spin or possibly come out. Even in the warm 90+ degree days I never had problems with the glue. Actually removed one with drill bit (slide hammer way) on arrow I thought had been glued with super glue type insert glue, the insert did eventually come out but whole inside carbon wall came out with it destroying the arrow. Now that is holding power!

Date published: 2013-03-22

Rated 1 out of 5 by Hoss91185 from unacceptable I used this glue on 1dz new arrows that I cleaned throughly and I followed the instructions for installing them. I took out 9 arrows to target practice with and after 2 groops I had lost 4 points in the bag. Its possible i did not have eough glue on the inserts but since there was a little excess to wipe away from each insert i don't think that was the problem.

Date published: 2012-08-01

Rated 5 out of 5 by ROGUE25 from Works good. I just followed the instructions, I have not had any inserts come loose. I used my snap on butane torch to heat the insert and installed them only took a couple minutes then place in cold water. My tap water wasn't hot enough to loosen the glue to realign the broadheads so I just used a heat gun on low to warm up the arrow and align the broadhead worked fine. Excess glue wiped off clean when it was hot. Works good so far, probably about 60 or 70 shots. Plus you can remove the inserts if you need to for some reason without ruining your arrow. I used this on carbon arrows.

Date published: 2012-01-19

Rated 3 out of 5 by kerrdog from doesnt like hot weather. Ok so I bought some of this to install some inserts and easton uni bushings. It is VERY easy to use, goes on well, works good. it just doesnt like hot weather. Its 100F right now in missouri and after shooting for 20 min the inserts started turning and wanting to pull out. If you were shooting inside, or were it stays below 80F most the time it would be great. Now it did work very well on my bushings. which to be honest was the main reason I bought it. I didnt want my bushings glued in permanently and like the fact you just put this in boiling water to remove the bond. this is great if you shoot pin nock and pin bushing..because if you bust one just heat it up and remove the broken bushing. The bushing doesnt get pulled on, or get much impact, so the bond stayed good in hot weather. Basically, Great to use on pin nock bushings, or collars or uni bushings. in all weather. Doesnt work on inserts in hot weather at all. Would work for indoor shooting, or cooler weather. Easy to use, and remove. I will still buy it just for bushings.

Date published: 2011-09-02

Bohning Ferr-L-Tite Cool Flex Carbon Shaft Adhesive Reviews - page 2

Bohning Ferr-L-Tite Cool Flex Carbon Shaft Adhesive

FREE Ship to Store

Customer Service

Recalls/Terms/Disclosures

Email & Text Sign Up

Resources

Select a Store

Company Info