Notice -- Simi Valley, CA.We cannot ship this item to Simi Valley, CA. --- Even though you are able to checkout with this item, it will be removed from your order if shipping to a restricted location.
{"notices":[
{"notice": "<b>Notice -- Simi Valley, CA.</b></br>We cannot ship this item to Simi Valley, CA. --- Even though you are able to checkout with this item, it will be removed from your order if shipping to a restricted location.","catentryIDs" : "122214,122215,122216,122217,122218,122219"}
]}
This SKU table contains a list of all SKUs available for the product. You can filter the list of items shown by selecting attributes.
Description
Reviews
Q&A
The original 2", 6 grain Bohning Blazer® vanes you've relied on for speed and accuracy for years! Simply position on a 17/64"-24/64" shaft, and submerge in 180º water according to instructions for a non-slip fit. No fletching jig or messy glue needed - you get perfectly spaced and precisely aligned vanes every time. Building high-performance arrows has never been faster or easier! 6 pack.
Fits 17/64"-24/64" shafts
Simple position and submerge in 180º water for a non-slip fit
No fletching jig or messy glue
Perfectly spaced and precisely aligned
Web ID: 10212213
Rated 5 out of
5 by
Collinja07 from
Worth every pennyI just bought this to repair my old arrows for practice, I cleaned my old fletching with a knife, and nail polish remover, except for one, and I wanted to test if it would hold even if it wasn't cleaned 100%, surprisly it held just fine. The only thing I have to say is that cabelas has it down that it only does arrows down to 17/64", the box says it can go down to less then a 1/4" of an arrow, it looks big but it does shrink nicely. Take your time and follow the directions. You will love it just as much as I do.
Date published: 2016-08-13
Rated 5 out of
5 by
hottrod64 from
Quick and easyMakes setting up your arrows so much easier and quick
Date published: 2015-10-05
Rated 1 out of
5 by
StevieCinFl from
HorribleI literally did what the instructions said: boil, dip for 10 seconds, let sit. First set failed: Fletchings came right off(first one just fell off) and four others flew off in flight. After returning the item I did the same (instructed by the manager) same thing: literally dipped the first one in and a fletch fell right off. Two more flew off in flight. First two sets. Maybe the adhesive is weak? Don't know.
Date published: 2015-03-17
Rated 5 out of
5 by
308fan from
Blazer wrapsAre very user friendly and as advertised. I'll never fletch with conventional fletchings again.
Date published: 2014-10-27
Rated 5 out of
5 by
Wildman4000 from
There greatWhen I first got these I figure what's the difference between these and the Nap stuff so I pick up a pack each for two of my crossbows( matrix 310 & Barnett Wildcat Recurve ) one took 16" bolts and the other 18" ( the 18" bolts for the matrix 330 & 310 should be cut to 16" ) so I put them on my bolts wow what a difference between both products the brazier I could get tighter groups with with both 16" & 18" bolts while the other product close but not close enough, I had no problems with them fallen off or nothing, they don't bend or be deformed when your pulling them out vs the NAPs, I would recommend the pure yellow or orange, it's easier to see and plus you don't loose them in the snow or areas where it's white and black, the only problem I had was how far to put it. But it's easy and simple.
Date published: 2014-09-26
Rated 4 out of
5 by
craby from
great productThese sre the best way to do it your self quivk and very easy
Date published: 2014-08-11
Rated 5 out of
5 by
Knuttsl137 from
They do what they say it does...Simple to use and work exactly as claimed. Just bring your water to a rolling boil and submerge slowly. DON't REMOVE IT FROM HEAT!!! The water will cool and they may not apply properly. I dip them for around 12 to 15 seconds or so. Shake them off, and shoot the things. You MUST COMPLETELY REMOVE all glues and oils from the arrow shaft. I use alcohol and cotton ball for this after carefully scraping the arrow shaft first. Immediately my groups got tighter with these. Went from 5 to 7 inch groups to and consistent 3 to 4 at 40 yards They hold up pretty well to use also. My practice set of arrows have been fired at least 300 time each since these were added, and show no real damage at all through a Bear Method at 70 lbs.. Whisker Biscuits are hard on vanes, but other than slight scuff marks from them passing through it so many times they're perfect, and shoot as well today as they did out the box. When applied correctly they are outstanding!
Date published: 2014-07-22
Rated 1 out of
5 by
spoiled from
failed immediatlyDip it in (the boiling water 10 seconds) pull it out , shake it off and shoot ! or so says the three step instructions on the back of the packaging . Now this is what really happens . Dip it in pull them out shake and watch as half of your blazer vanes come off and fall to the floor ! Totally disapointed !
Thank you for choosing Bass Pro Shops. The link below will take you to a how to information page.
https://www.wikihow.com/Fletch-Arrows
Answered by: BPSProductSpecialist8
Date published: 2017-12-14
Will these work on crossbow bolts
Asked by: GPSmiley
Yes, the vanes are will work on crossbow bolts.
Answered by: CommunityAnswer
Date published: 2017-06-01
What is the helical degree that they are twisted? 3° seems to work best, but the description doesn't say.
Asked by: JRKendrick
They are fletched straight with a slight offset.
Answered by: BPSResource9
Date published: 2017-06-01
How is the durablility on these because i had issues with the other quick fletch coming apart after like 10 shots.
Asked by: bigman96
When applied correctly they are outstanding. After at least 300 shots mine show little to no wear even passing though a Whisker Biscuit. What wear it does show are just slight scuff marks from passing though my rest, but they shoot as true as the day they were applied. With a drop away rest even scuffs go out the window. I have had absolutely no issues with these being fired out of a high velocity bow,(Bear Method 340 fps). No rips, cracks,or tearing. Just make sure you complete strip your old vanes off and clean all glue from them of. I use my pocket knife and scrape carefully. Use alcohol to clean any oils from your fingers off the shaft. Then just follow the directions. Hope this helps brother. Good luck in the Fall.
Answered by: Knuttsl137
Date published: 2017-06-01
how many are in a package?
Asked by: attackzach
Six...
Answered by: Knuttsl137
Date published: 2017-06-01
Compatable with Easton Axis St arrows?
Asked by: MikeGNC
Works with all carbon arrows.
Answered by: Knuttsl137
Date published: 2017-06-01
Do the fletching come in helical?
Asked by: nyc1
I've used these vanes and had no problems. Just set the angle on your fletcher and go for it.
