This SKU table contains a list of all SKUs available for the product. You can filter the list of items shown by selecting attributes.
Description
Reviews
Q&A
Eliminate the hold-up a loose connection can cause by replacing your old parts with Bass Pro Shops® rugged and reliable Trolling Motor Plugs and Receptacles. The heavier 8 gauge wire is perfect for 24 volt trolling motor systems while the 10 gauge wire is suitable for 12 volt trolling motor systems.
Provides quick and easy connection
Eliminate loose connections
Heavy-duty construction
Available with 8 or 10 gauge wire
Web ID: 10205429
Rated 5 out of
5 by
CptT from
Solid productOrdered the plug and receptacle when I replaced my old trolling motor. They are both very solidly constructed. The receptacle seals tight to water when the plug is not in place and the electrical connection is solid and tight with no issues for a 24v motor. Highly recommend them.
Date published: 2017-07-17
Rated 5 out of
5 by
Oregonhunterpersonji from
Very good productReceptacle was easy to install with very good wire leads of the proper size. I helped install a similar product from brand x soon after installing Bass Pro model. There was really no comparison. Bass Pro's was the winner.
Date published: 2017-05-14
Rated 5 out of
5 by
afisherman502 from
great purchaseworks great, stays plugged in, no problems with this product
Date published: 2015-06-02
Rated 5 out of
5 by
RFS1 from
Trolling Motor Plugs and ReceptaclesWires had shrink fit couplings on them. Very good fit between plug and receptacle.
Date published: 2014-06-09
Rated 4 out of
5 by
Maggiesmaster2 from
Seems to work okThe plug and receptacle seem to work ok in my boat. Good value for the money.
Date published: 2013-08-20
Rated 1 out of
5 by
roberttrogfishmadness from
dissapointedI bought a trolling motor and was not advised it didn't have a male plug connected to it as it has in the past. It took about three days to receive the motor but it took over a week to receive the plug!
Date published: 2012-09-29
Rated 5 out of
5 by
deedee68 from
Best PurchaseThe parts was easy to put in and had every thing that you needed to do the job
Date published: 2012-09-25
Rated 4 out of
5 by
Sprinkles from
Works As AdvertisedComes with plenty of lead to fasten wires. I don't use the easy connectors as I Solder everything but it fits well with the male connector from my trolling motor.
Does this receptacle accept a plug with a groove in it?
Asked by: Philly Dog
Per the Manufacturer - "The Male side has the grove this female side has the keyway"
Answered by: BPSResource8
Date published: 2018-09-06
I need 12 volt two male with guide notch at top. Which model will work for me?
Asked by: Clintavious
Will the BPS trolling motor plug work on a Minn Kota salt water trollling motor SKU 1543035?
Asked by: Redfis 55
•Universal design The heavier 8 gauge wire is perfect for 24 volt trolling motor systems while the 10 gauge wire is suitable for 12 volt trolling motor systems.
Also, we offer the Minn Kota® MKR-18 12V Plug and Recepticle on our Cabela's Site Item: IK-022587 https://www.cabelas.com/product/MINN-KOTA-MKR-V-PLUG-RECEPTICL/1646824.uts.
Thank you
Answered by: BPSResource7
Date published: 2018-06-13
will this receptacle fit the factory hookup on my Grizzly 1754
Asked by: new boat
Can this be connected to battery charger, and back fed thru boat connection to charge the trolling motor ?
Asked by: Patch
Is the 10 amp receptacle for a 3 prong plug? picture shows 2 prong.
Asked by: DrMike
Thank you for choosing Bass Pro Shops. They have two prongs.
Answered by: BPSProductSpecialist8
Date published: 2017-10-27
Will this work with a motor guide x3?
Asked by: Gtbjr
Thank you for your inquiry:
Per the manufacture: Yes this will work. We recommend going to at least an 8 gauge connector for this.
Answered by: BPSResource15
Date published: 2017-08-16
My old plug has 3 wires black/red/orange. just bought only has 2 wires black/red it's for my minn Kota model 599 trolling motor.
Will this new one work ????
Asked by: rdds57
Per the Manufacturer - "Sounds like this customer has the older 599 Minn Kota. These motors were 12/24VDC and require a 3 Wire plug. The new models only require a 2 wire plug. It should read the exact model and voltage on the head of the trolling motor. "
