CA WARNING -- Product contains chemicals.CA WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
{"notices":[
{"notice": "<b>CA WARNING -- Product contains chemicals.</b></br>CA WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.","catentryIDs" : "112209,112210"}
]}
This SKU table contains a list of all SKUs available for the product. You can filter the list of items shown by selecting attributes.
Description
Reviews
Q&A
We believe strongly in catch-and-release fishing. That's why our Bass Pro Shops® Gold Series Nets are made from rubber dipped polyester and feature small-loop conservation netting in a shallow, flat-bottom design that keeps fish unharmed and supported safely while you remove the hook. The Gold Series Replacement Nets are 18'' deep and are designed to fit round and teardrop-shaped hoops.
Web ID: 10213180
Rated 4 out of
5 by
Canyonpassage from
Boat Netting ReplacementI purchased a new netting for my large boat net. I couldn't find the original type so I bought a replacement that would fit the hoop and hoped it would be deep enough. So far it works well and it fits and looks nice. Unlike the original, the material in this netting is rubber-coated so I hope it will last longer.
Date published: 2017-07-16
Rated 5 out of
5 by
33950 from
very niceA lot nicer then expected,for the price.It was very simple to put on and the smaller mesh is easier on the fish.Also the hooks do not hang in it.I mostly fish inshore and it is just the right size.
Date published: 2017-07-13
Rated 5 out of
5 by
hornman012002 from
excellent productGosh, the new net slid right on perfectly. Worked great on large smallmouth and walleyes in Canada.
Date published: 2017-07-04
Rated 5 out of
5 by
HighLakeTroller from
Best ever.Very satisfiedThis net is so much better than the shallow rubber one I had. And it has the perfect shape. It's deep enough for anything from panfish to bass to trout. A little tricky to put on, but you just keep working it around. Great purchase. I'm very happy with it.
Date published: 2017-05-11
Rated 5 out of
5 by
RogerLH from
Generally satisfiedExactly what I wanted and saved me money over buying a whole new landing net
Date published: 2017-03-22
Rated 5 out of
5 by
SDRick from
It's a great net.Great net and after reading one of the reviews about squeezing the net frame when sliding the new net on, I didn't have any trouble getting it on. Thanks
Date published: 2017-03-06
Rated 4 out of
5 by
NautiBuoys from
Gold Series Replacement NetBought the smaller size net and it's a bit bigger than stated. It was a little tricky to put on but has held up fine. I like the flat bottom and its depth keeps fish from jumping out. It is also very light weight and can be used one handed, which is a definite advantage over other types of rubber nets.
Date published: 2016-07-15
Rated 5 out of
5 by
bobbybass55 from
Net replacementI purchased this replacement net, to fit my hooped landing fishing net.(20X23) I read all of the reviews on the installation and I was totally confused. After many tries I finally figured out how to get the net on the hoop, without damaging the net. Start by installing one of the open ends onto one end of the hoop. Work it on slowly, about an inch at a time. After about half way on, you will have to bend one side of the hoop under the other, to give you enough slack in the netting to be able to continue to putting the net on the hoop. Be patient and go slowly, it took me, approximately ten attempts of moving the open end of the net, on the hoop and moving the slack around the hoop at the same time Each time remember, to pull the opposite end of the hoop under the side you started the net on, to give you the slack that you need. After figuring this out, it took me approximately 5 minutes to put it on. Note: if you have a partner/helper makes it a lot easier.
Thank you for choosing Bass Pro Shops. The mesh size is 3/8” x 3/4”.
Answered by: BPSProductSpecialist8
Date published: 2018-05-02
How do i remove and replace fishing net from frame without cutting the net ?
Asked by: Chris big dog
What is the largest size, dia and depth of replacement nets for landing nets you have or can order
Asked by: Danh
What is the circumference of the net where it goes on the net frame??
Asked by: SDRoosterrr
Per the manufacturer - "GSR2022 is 4” and GSR2226 is 4.5”
Answered by: BPSResource8
Date published: 2017-05-31
How much weight can both nets hold?
Asked by: TroutGuy92008
I think it's strong enough to handle anything you can get in the opening of the net. You'll be happy with it.
Answered by: HighLakeTroller
Date published: 2017-05-31
I have a tear drop hoop, how to measure for replacement net?
Asked by: menotyou1time
Hi, to purchase the correct size of the Bass Pro Shops Gold Series Replacement Nets, SKU: 1671573, it is necessary to measure across the widest portion of the existing net hoop from side to side, and then from the point where the loop joins the handle to the opposite side, or front of the hoop.
Thank you!
Answered by: BPSResource7
Date published: 2017-05-31
How do you get this replacement net on the handle? I had a customer tell me he tried every way possible and could not get it on.
Asked by: CaptainOne
Do you wear pants and put on a belt?
Think of the net as the pants with a continuous belt loop. Think of the hoop as the belt.
Insert ONE END of the "belt" into the "belt loop" and keep going until it comes out the other end of the "belt loop". I did this start to finish in less than 3 minutes; it truly is SIMPLE. I'm guessing here, but apparently a lot of people try to insert EACH END of the hoop into the net hoo - that is NOT how to do this!
