This SKU table contains a list of all SKUs available for the product. You can filter the list of items shown by selecting attributes.
Description
Bass Pro Shops 1000 lb. Big Wheel Galvanized Trailer Jack
The swing up Bass Pro Shops® 1000 lb. Big Wheel Galvanized Trailer Jack is totally galvanized inside and out, making it ready for the harshest environment possible. Designed with a 7'' high x 2'' wide, all-terrain mag wheel, the Big Wheel Galvanized Trailer Jack features a built-in grease fitting for long lasting performance, dual release pin for strength and a smooth-turning ergonomic Power Grip-handle. 24" lift and 12" travel. All galvanized hardware. Fits up to a 3'' x 5'' tongue.
Cap can be easily removed to grease gears
Bevel gear retained by squared gear shaft for superior strength and maximum torque
Ergonomically designed Power Grip handle for supreme comfort
Grease fitting for easy lubrication of jack screw
Jack screw fully plated for corrosion protection; cold formed from single piece steel is stronger than welded or bolted designs
Worm gear with grease retaining bevel for continuous lubrication
Proprietary SEACOAT™ coating inside and out for superior corrosion resistance
Handle has positive lock mechanism for better stability and strength
Large diameter pivot washers for reduced stress and increased surface contact, strength and safety
Dual pin locking mechanism for added safety and strength
Galvanized hardware and components for excellent corrosion resistance
Large stamped flare to increase strength
Stamped ribs for added strength
Wheel has large cross sectional area and spoke design for added strength
{"notices":[
{"notice": "<b>Notice--Bulk Item Packaging.</b></br>Please note that this item ships in its own packaging, so the contents may be identified.","catentryIDs" : "78178"},
{"notice": "<b>CA WARNING.</b></br><img src=~https://assetshare.basspro.com/content/dam/bps-general-assets/web/site-elements/images/icons/warning.svg~ class=~alert_Icon~ alt=~CA Proposition 65 Warning~> WARNING: Cancer and Reproductive Harm - <a href=~https://www.P65Warnings.ca.gov/product~ target=~_blank~>https://www.P65Warnings.ca.gov/product</a>","catentryIDs" : "78178"}
]}
Reviews
Rated 4 out of
5 by
tensleepman from
Looks Good, but...Bought this as a replacement for an almost identical jack made by Sea Sense. Turns out this jack is made in China (the older one was made in the USA) for Sea Sense. I was disappointed that Sea Sense does not have a bevel gear repair kit as do other prominent jack manufacturers, as these gears wore and made the old jack unusable. The Cabela's (BPS) jack seems well made but I noticed that the "Big Wheel" is not big (smaller than the wheel on the old jack), less than 6" diameter on the 1,000 lb. version, not 7" as stated in the specs. The jack also is not galvanized but has a coating called Sea Coat. Time will tell...
Date published: 2019-07-26
Rated 1 out of
5 by
SCDucks from
Waste of time/money3 years old, hardly ever used, worm gear inside stripped out, never over-tightened and it was greased properly.
Date published: 2018-08-09
Rated 1 out of
5 by
Jayt98466 from
CheapInstalling it was easy. Seemed durable. Greased it and the Zirk fitting snapped right off. Took it back. Wont buy another
Date published: 2018-05-16
Rated 2 out of
5 by
Melbournenetmaster from
Hard to get tire to turnBought this item to replace the one that had been on my boat for 15 years. The mechanism for the jack seem to be fine and the handle is comfortable. However, I use this to move my boat around in the garage. I find the wheel to be hard to get to turn even after trying to grease it.
Date published: 2016-01-11
Rated 5 out of
5 by
Fishinjd from
quality productI had to get a replacement trailer jack. This one went one easily and seems to be top quality. Great service!
Thanks!
Customer since 1982 when we had to call in every order.
Date published: 2015-11-16
Rated 5 out of
5 by
ocfishguy from
...May need minor fit......I purchased this BPS 1000# Trailer Jack because it is advertised as 'SALTWATER TESTED'!! I replaced a SHELBY 1000# on my 5 year young 24ft Snowmobile trailer that had a OEM Shelby Jack rusted from the inside out. The BPS 1000# 'Saltwater Jack' took about 30 minutes of minor fit to install. I could not use the inside brackets nor the bolts due to OEM Frame manufacturing, BPS Jack bolt minimum thread length, limited space for bracket and wrench fit to nut to proper fit. So ... I'm probably open to improper installation. I had to leave the BPS 1000# jack 'center bolt' loose on the lock plate ...otherwise the 'Dual Locking Pins' would not line up without disassembling and reaming the 'Dual Pin' locking holes in the lock plate for proper fit...... So right now the jack has a slight lean....but I have no issues locking the 'Dual Pin'. The finish and quality of this BPS Trailer jack is far superior to the OEM Shelby jack which I oiled and greased all the time....but still rusted, locked up and failed. I was concerned about the finish of the BPS1000# Trailer Jack that it was only sand blasted to make it look 'Girly/EyeWash/Fancy'! The MFG assures that the finish is 'Saltwater Friendly'. Considering what PENDOT sprays on the winter roads that EATS and RUSTS EVERYTHING...Including $50K PU Trucks...???...I'll give this item a 'Shot at the Title'! I'll keep you posted on the durability of this item!!
Date published: 2015-11-04
Rated 5 out of
5 by
BobberD from
Like it so farInstalled this as replacement a couple of months ago. I immediately noticed that the jack "tilted" side-to-side. There was excess clearance between the mounting plate and the rest of the assembly. This was easily corrected by tightening the large center bolt a little.
After making this adjustment I really like this jack. It cranks easily. It rotates up and the lock pins engage well. The main thing I've noticed is that it's much easier to move the boat by hand on my driveway than with my old jack. Helps save the old back.
Date published: 2015-09-29
Rated 5 out of
5 by
fraaank from
a steal for the moneynone of the negative reviews i read about this jack are true. the mounting hardware supplied is versatile and adapts to any trailer tongue between 3 and 5 inches tall.
Bass Tracker 175TXW with Trailstar trailer, 2014
What is the size of the Tongue Jack? 1200#???
Asked by: Yankee12
Thank you for your question. The Bass Pro Shops® 1000 lb. Big Wheel Galvanized Trailer Jack fits up to a 3'' x 5'' tongue and the jack is for 1,000 lbs.
Answered by: BPSResource3
Date published: 2018-07-13
Need to replace a Shelby trailer wheel jack with 3/8" center bolt swivel. Do you carry a product that will work on the existing welded bracket? I can not find this Shelby product.
Asked by: GJP3
What size trailer tongue will this jack fit?
Asked by: kbrogan
I was told it would fit my pro team 175s tralier
Answered by: arnies
Date published: 2017-06-02
Can this be used as a replacement for a welded on bracket?
Is there a large c clip that holds tube to the swivel bracket?
Asked by: enskyte
no. it is held in place by a spring loaded pin. very secure.
WARNING: Cancer and Reproductive Harm -