Free Shipping on orders of $75 or more applies to economy shipping only to US and Canadian addresses on all internet or phone merchandise orders. (Canadian orders will be charged a $3.50 brokerage fee, duty and tax.) Excludes gift cards, orders shipped outside of the US and Canada, expedited or additional shipping and hazardous, special fees. Shipping charges on previous orders will not be reimbursed.
This high strength CMC® 6061 extruded aluminum alloy mounting bracket lets you easily raise or lower your motor with a 1-1/8" wrench. Adjustment can be made at the top or the bottom. Allows 5" of slot adjustment at the motor mounting bracket and 1-1/2" slot adjustment at the transom bracket. Position it at the precise height for optimum motor performance, increased top-end speed, better prop clearance, lower engine RPM, reduced lower unit drag, and improved fuel consumption at cruising speeds. The bracket also sets your motor back 5-1/2" to let it run in cleaner water for peak efficiency. It mounts easily with included hardware - no drilling or modifying. For V-6 and smaller engines up to 300hp.
High-strength extruded aluminum mounting bracket
Allows 5" of slot adjustment at the motor mounting bracket
Allows 1-1/2" slot adjustment at the transom bracket
Great jacking plate
Easy to install and use. Even in the middle of the lake the motor hieght can be adjusted. Just don't drop the wrenches into the lake, I tied on a cord so I wouldn't. Well worth the price.
October 17, 2011
This is a great product
This product did every thing that CMC said it would do. I gained about 3 mph out of my mercury 150 and greatly improved my hole shot. As a test I completely filled my live wells, which I do not normally do, and placed a large size friend or mine in the passenger seat. The added weight and water did not make any difference in my boat quickly getting out of the water and onto plane. As for the ride of my 18.8 ft nitro, much more of the hull is gliding above the water and not hitting the rolls nearly as hard, thus making for a smoother run. My jack plate arrived in great condition with all the parts included. It took me and a friend about 1 1/2 hours to install it with out any real trouble. Lastly the addition of this plate really gave the back end of my boat a whole new performance style look.
February 9, 2011
Got the manual jack plate for an e-tec 150 bass boat. Easy to install, easy to set up, works really well. Increased my speed and gave it a better hole shot.
June 4, 2010
i had the electric transom jack and had bad luck with it so i got the CMC Manual Transom Jack Plate and it working better then the electric on and was a lot cheaper
May 14, 2010
It does not come with any auto release system, it is a rigid mount only, but on my 25hp. Johnson it has a manual release built into the motor and that is what I use. So far it has worked great for me! Check your motor for this.
Yes, this plate will mount to your nitro with out any modifications. All of the holes drilled in the jack plate will match up perfectly with the holes in your boat. The plate will arrive with 4 nuts and bolts, which can be used to mount the jack plate to your motor. Then use the 4 nuts and bolts which you already have to mount the plate to your boat.
We will not share your email address or the recipient's email
address. We make no use of the email address or information contained in
these greetings except to complete the service as you have requested.