3-Blade Replacement Prop for Bass Pro Shops Prowler T45/36 & T55/40 Trolling Motors
does not fit MG T36
The text on the package said it fits a motorguide T36. It does not. The hub is the same size, as is the shaft, but the depth is wrong which leaves a gap between the prop and the motor. This gap is about 1/4" and any kind of weeds would eat this thing alive. I didn't even try it on the water, and called BP for a return label, which they agreed to.
Other than that -, the nut looks like junk and would need a 3/8"-24 nylock and a washer to hold it on in reverse. Also, the prop is polycarbonate and does not look it would hold up for very long. But the not fitting a MG T36 was the dealbreaker.
March 18, 2013
Basic Prop but falls off easily
Basic Prop that works as designed. However, I have lost two of these props this year. On the second one, I made sure the prop nut was on very tightly and I check before and after each time I take the boat out. I just bought my third and put lock tight on the screws/prop nut in an attempt to insure it will stay on. If you hit any rocks, trees, the bottom, weeds or other objects you might want to pull up your motor and check and make sure the prop nut is still on tight..
October 26, 2010
it is an extra in case I lose my other prop
I can't say much as I have not used the replacement prop as of yet. I bought it as a spare so that when and if I lose my present prop I will have a backup. So for now at least it is sitting in a box that I take with me on my fishing trips. I am positive it will work just fine when I need it and thank you for your interest.
October 13, 2010
I have lost two of these motor guide props, nut will work loose over time, replace nut with a 3/8 24 fine thread nylon lock nut with stainless fender washer,,
July 28, 2011