Loading...
Your Cart ()
Close Panel
Bass Pro Shops® 1400-lb. Trailer Winch
- 1400-lb capacity
- 4 to 1 gear ratio
- 2-way ratchet and a Power-Grip handle
- Rust-resistant finish
Get your boat on and off the trailer without hassle with this Bass Pro Shops 1400-lb. Trailer Winch. Offering a 1400-lb capacity and 4 to 1 gear ratio, this Trailer Winch features a 2-way ratchet and a Power-Grip handle for convenience and ease of use. Solid gear construction and rust-resistant finish means this winch will be with your trailer for years. Includes 20’ winch strap and hook.
- 1400-lb capacity
- 4 to 1 gear ratio
- 2-way ratchet and a Power-Grip handle
- Rust-resistant finish
Get your boat on and off the trailer without hassle with this Bass Pro Shops 1400-lb. Trailer Winch. Offering a 1400-lb capacity and 4 to 1 gear ratio, this Trailer Winch features a 2-way ratchet and a Power-Grip handle for convenience and ease of use. Solid gear construction and rust-resistant finish means this winch will be with your trailer for years. Includes 20’ winch strap and hook.
6 Questions | 26 Answers
Outdoor Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
Expand All
Collapse All
(read all my Q&A)
Answers
A:
5.5 x 3.5 inchesAnswers
A:
Holes not universal on my trailer. Had to drill one hole. Looks like it would easily mount on any trailer.
A:
worked on my trailer, no problem. Holes lined up perfectly.A:
Depends but if it doesn't match up to what you have, then you should only have to drill a couple holes to bolt it on. I actually moved the position on mine so I had to drill 4 holes and it only took about 10 minutes.A:
No. You will more than likely have to fabricate a bracket. I did it with not much work...the cable needs to come out in as straight a line as possible.Details:
Will this winch will handle my 27 foot 6,400lb boatAnswers
A:
You may be asking a bit much of it to pull a 6400lb boat. I think it would probably do it, but I would question durability.A:
You're probably asking too much of the smaller one! But the difference in cost is not, in my opinion that much.A:
If your boat weighs more than the load pulling weight of this winch (1400 lbs. ) i would use a larger two speed type winch, or even, more honestly, use an electric winch, with power in and out. If you cannot find one here at BPS, try west marine.A:
I dont think so. My boat is right around 1800 and 19 long. Its about right for it.A:
probably will but I would go to the next one upAnswers
A:
Yes, the Strap, Hook, and Hardware for attaching are included.A:
High quality strap included and pre-spooled on wench.A:
Yes, it's one of the reasons I ordered it.A:
yes, the strap and hook are included with the winch.A:
yesA:
Yes, WITH 20' STRAP AND HOOKAnswers
A:
Works fine on my 17ft pro craft with 115.A:
It should do the trick. If boat is over a ton though, durability might be a question.A:
In my opinion, yes.A:
My boat is also a 115 and 19 long, and it works really well for it.A:
will work with no problemA:
absolutely not. I have it on a 16ft lund with a 40HP and i cringe every time i pull my boat up. I will be replacing.Details:
your item # 38-510-466-00 is described as a two way ratchet. Does this mean you can move the handle back and forth like you would a scocket wrench? Does it mean you can ratchet the strap in or out but the handle must travel 360 degrees for either way of travelAnswers
A:
I think it means "it clicks both ways". When wenching boat onto trailer, wench clicks and locks to keep boat from sliding down. It will also click when pulling strap out to hook onto boat. This keeps handle from free spinning and "backlashing" the strap. It is a more controlled motion pulling the strap out. Can move lever to middle and pull strap with no resistance also. No great advantage or disadvantage either way.A:
Quite simply it means that you can ratchet the winch in either direction, cranking in or cranking out, and there is also a neutral so you can free spool the winch if you like.A:
means you can release the tension to off load your boatA:
Basically will rachet in both directions. That is, when unwinding the winch strap or when winding the winch strap in. Rachet lever can also be placed in a postion that allows the winch to free wheel.1 of 1
Get help about this item from fellow customers.
Ask your questions. Share your answers.
6 Questions | 26 Answers
1 of 1
Customer Service
Live Assistance:
Daily 7am-10pm Central Time
Daily 7am-10pm Central Time
- 1-800-227-7776
- Contact Us
- Reward Points
- Gift Cards
Prices shown are in U.S. funds
All pages © 2006 - 2012 BPS Direct, L.L.C. All rights reserved.