Tuff Coat™ Rubberized Non-Skid Coating
Sale starting at:
Clearance starting at:
- Coverage - 1 Gallon of Tuff Coat covers approximately 40-45 square feet
- Surfaces covered with Tuff Coat Rubberized Coatings must be primed with Tuff Coat Primer(See note below)
- Helps prevent slips
- Deadens and absorbs noise
- Texture may be varied when applied
- Non-toxic and environmentally friendly(no VOC's)
- Consists of recycled rubber crumb aggregate-non abrasive
- UV resistant pigments & stabilizers enhance protection
- Protects against chemicals such as acids, solvents, fuels, chlorine, salts, etc.
- Resists impact
- Waterproofs wood decking
- Can be sprayed, brushed or roller applied, easy for the beginner
- Dries to a quick, easy to clean finish
Tuff Coat is a high-performance, non-skid polyurethane safety coating that works to effectively coat and weatherproof a number of surfaces. This UV resistant coating protects your boating surfaces, and employs a non-abrasive, crumb aggregate texture that can be sprayed or brushed on, according to how much texture you desire for a protected, non-skid surface. Tuff Coat is highly effective in absorbing noise, which makes it extremely handy in coating aluminum boats and skiffs, as well as lessening the noise in your truck, dock, deck, or ramp. One quart covers approximately 12 sq. ft.; 1 gallon covers about 40-45 sq. ft.
Ideal applications include:
NOTE: Tuff Coat Rubberized Non-Skid Coatings are designed to be used in conjuction with Tuff Coat Primers and Roller Applicators.Tuff Coat Epoxy Primer Kit sold separately and can be found through item search at item number 1315396. Tuff Coat MP-10 Metal Primer sold separately and can be found through item search at item number 1315397. Tuff Coat Textured Roller Applicator sold separately and can be found through item search at item number 1218203.
- Aluminum, Pontoon, House, Jon, Duck, Ski, & Bass Boats
- Decks & docks
- Boat Roofs
- Dog kennels
- Truck beds
Rated 4.5 out of 5 by 25
Rated 3 out of 5 by cigar Good product bad color
Purchased this product to recoat an area of a boat after a repair. The original material still looks great and makes a nice slip-proof and weather-proof coating. The only issue with this product is that the color is not what is shown in the on-line catalog. The "Olive green" is actually more of a bright lime green. Slightly dissappointed. Had to use another product to match the color on the boat.
May 13, 2010
Rated 5 out of 5 by fishNdude Perfect Product
I bought this item to coat the inside of my 14ft. aluminum boat. Before the floor would get wet and slippery. Now I can walk around, (I know its only 14ft.) without slipping as I had done before. "Perfect Product".
April 14, 2010
Rated 5 out of 5 by RHuston Great Alternative to Carpet
Just got done putting this in my boat. I ripped up the old worn carpet, scraped down the surface, and then rolled it on. This looks absolutely great and I believe it will last for a lot longer than carpet. Plus if it does start to wear I can always just put on another coat instead of starting over again. It was also incredibly easy to put on, just follow the instructions. I didn't use their primer but it might not be a bad idea on some surfaces, just didn't need it on my fiberglass.
March 29, 2010
Rated 5 out of 5 by rtbuilders love this stuff
i used this on my ranger and love it ez to clean and non slip is great for the kids
May 13, 2009
Need Help? 7 days a week: 7am to 10pm CT or call 1.800.227.7776 anytime