Tuff Coat™ Rubberized Non-Skid Coating
Sale starting at:
Clearance starting at:
- Coverage - 1 Gallon of Tuff Coat covers approximately 40-45 square feet
- Surfaces covered with Tuff Coat Rubberized Coatings must be primed with Tuff Coat Primer(See note below)
- Helps prevent slips
- Deadens and absorbs noise
- Texture may be varied when applied
- Non-toxic and environmentally friendly(no VOC's)
- Consists of recycled rubber crumb aggregate-non abrasive
- UV resistant pigments & stabilizers enhance protection
- Protects against chemicals such as acids, solvents, fuels, chlorine, salts, etc.
- Resists impact
- Waterproofs wood decking
- Can be sprayed, brushed or roller applied, easy for the beginner
- Dries to a quick, easy to clean finish
Tuff Coat is a high-performance, non-skid polyurethane safety coating that works to effectively coat and weatherproof a number of surfaces. This UV resistant coating protects your boating surfaces, and employs a non-abrasive, crumb aggregate texture that can be sprayed or brushed on, according to how much texture you desire for a protected, non-skid surface. Tuff Coat is highly effective in absorbing noise, which makes it extremely handy in coating aluminum boats and skiffs, as well as lessening the noise in your truck, dock, deck, or ramp. One quart covers approximately 12 sq. ft.; 1 gallon covers about 40-45 sq. ft.
Ideal applications include:
NOTE: Tuff Coat Rubberized Non-Skid Coatings are designed to be used in conjuction with Tuff Coat Primers and Roller Applicators.Tuff Coat Epoxy Primer Kit sold separately and can be found through item search at item number 1315396. Tuff Coat MP-10 Metal Primer sold separately and can be found through item search at item number 1315397. Tuff Coat Textured Roller Applicator sold separately and can be found through item search at item number 1218203.
- Aluminum, Pontoon, House, Jon, Duck, Ski, & Bass Boats
- Decks & docks
- Boat Roofs
- Dog kennels
- Truck beds
Rated 4.5 out of 5 by 25
Rated 3 out of 5 by BassyMaGee Like painting with spackle
First off, it is what it is, it's a roll-on, non-skid, flooring material. It definitely is that and it does exactly what it says.
I bought this to replace my carpet in my old fish & ski fiberglass boat. I sanded and primed with the recommended epoxy (which is GREAT) and then taped off where i didn't want it. There is absolutely no way to do any detailing with this stuff. I had to take a foam brush and literally pat it around the edges the roller couldn't get to, it's not pretty, but it's done now.
My problem came when trying to get it down evenly, it's just about impossible. I mixed it with a drill for at least 10 minutes before deciding it had to be good enough. Then it plopped out of the can like old oatmeal. Then it was impossible to get an even amount in the roller and even HARDER trying to roll it down evenly. It would build up in spots that you can not roll flat, I had to actually smash it down by hand, then try to roll over what was left for texture. I will say by the second coat, it was slightly better coverage.
So, if you're using this product on a flat pontoon or if you just don't care how it looks when done, this is great. I was simply hoping for a slightly cleaner finished look.
Also, it cures very hard and dry feeling. I was sort of expecting rubbery, tacky finish, but it's more like walking on a textured ceiling. Seems tough enough so far.
May 2, 2011
Rated 4 out of 5 by AFGunner Good Deck coating
I bought this to go on the decks of my 19ft aluminum center console...used their primer and this coating..Take my advice and buy one of the paint stirring appliances for your electric drill as you need to really stir it good before you start and stir several times while you are putting it down...bought two gallons and found that I needed almost all of it to do my boat...looks good, but the colors don't match the examples on the web site...Light grey turned out to be darker than I really wanted, but it looks much better than scraped and scratched jon-boat olive green.
April 23, 2011
Rated 4 out of 5 by jimmywt So Far So Good
Coating applied alot easier than one would think as long as you use the suggested applicator. Seems tough but time will tell. Installed on flooring of my 16' Spectrum instead of carpet and hoping for the best!!
April 11, 2011
Rated 4 out of 5 by Immsparticus slipped right on the deck
Make sure you do a good job stirring it all of it. The agragret settles to the bottom. Goes on easy but buy the roller that is made for the product.
February 17, 2011
Need Help? 7 days a week: 7am to 10pm CT or call 1.800.227.7776 anytime