Free Shipping on orders $99+. Use code 99FREE

Enter promo code '99FREE' in the "Enter Promotion Code" box at checkout

You may also order by calling 1-800-BASS-PRO (1-800-227-7776). Give the phone representative key code L4BF

Free Shipping on orders of $99 or more applies to standard shipping only to US and Canadian addresses on all internet or phone merchandise orders. (Canadian orders will be charged a $3.50 brokerage fee, duty and tax.) Excludes gift cards, orders shipped outside of the US and Canada, expedited or additional shipping and hazardous, special fees. Shipping charges on previous orders will not be reimbursed. Cannot be combined with other promotion or offers.

TruGlo® Magnum Gobble-Dot™ Sight

   

Sale price: Clearance price: Starting at: Sale starting at: Clearance starting at: Reg. price:

Description
Firearm Model
Quantity Price & availability

Midel TG941XA

1/4" Ribs

3/8" Ribs

MODEL TG941XB

MODEL TG941XC

6mm Ribs

5/16" Ribs

MODEL TG941XD

The TruGlo® Magnum Gobble-Dot™ Sight is one of the #1 selling fiber-optic turkey sights. In-line, Tri-Dot sight mounts on rib with contrasting fiber colors in front and rear sights.

Model TG941XA: Fits most Remington, Browning Gold (camo), and Charles Daly
Model TG941XB: Fits most Mossberg, Weatherby, Winchester (excluding SX3), and most populat 10 gauge models
Model TG941XC: Fits most Beretta Field Grade, Benelli 20 ga, Browning Gold/A-5, Franchi, and Winchester SX3 models
Model TG941XD: Fits most Benelli, Browning BPS, Ithaca, Ruger Red Label, Savage, and 8mm ribs
Rated 4.5 out of 5 by 27 reviewers.
Rated 4 out of 5 Good for the price! I go to alot of "Block shoots" and hunt turkeys with my Rem 870. These sights are good during bright light but not that good during low light. They are easy to install and for the price they can't be beat. They work well in most cases but not the best you could buy. November 15, 2010
Rated 4 out of 5 great product great sights fit perfect on 870 express will make it hard on the turkeys May 19, 2010
Rated 5 out of 5 by great for the price I was in need of sight for a new remington 870 super mag i just purchased.I like the looks of this,but was worried about the quality,only 15.00 dollars. It went on the gun with little effort,it worked great ,killed my turkey. May 17, 2010
Rated 5 out of 5 by Great These are some great sights. I put them on my Maverick 88 12 gauge. Fits it like a glove. They look and work great, and they are cheap. At first, I was a bit skeptical about purchasing them, for the fact that they were so cheap. But, now all doubt is removed. Took me all of 30 seconds to get them on the gun. December 27, 2009
<<prev 3 4 5 6 7 next>>
7 Questions | 18 Answers

Outdoor Answers

Get help about this item from fellow customers.

Ask your questions. Share your answers.

 
 
Browse Q&A
 
 
Sort by
Details: 
TG-941XC says it is for Browning A-5 and is for a 6mm rib, my A-5 has 7mm rib, which model do i buy?
1 year, 4 months ago
Answer this Question
0
0

Answers

Staff Answer
A: 
Per TruGlo web site, model TG941XC fits a Browning A5. The front diameter is .060”; rear diameter is .035”. Thanks
11 months ago
by
 - Springfield, MO
Read all my Q&A (read all my Q&A)
0
0
1 year, 6 months ago
Answer this Question
0
0

Answers

A: 
It's a clip and adhesive that goes on the rail. Best thing I bought for my shotgun.
7 months ago
0
0
Vote as Best Answer
Thanks for Voting

A: 
for a remington...both. clips and has the little stick on things.
7 months ago
0
0
Vote as Best Answer
Thanks for Voting

Top 1000 Contributor
Top 1000 Contributor
A: 
double sided tape is how they mount it doesn't stick for long,catch a brier or gun oil who knows. i used caulking rtv type or silicone ,can be purchased in small (tooth paste type tubes ),or you could use epoxy ,but i used the caulking ,if i ever need to remove it it would scrape off. this holds my sight on for sure,used it many turkey seasons now and it stays on.these sights are awesome,they really give you the edge in low light or if your eye sight isn't good like mine ~!you will love them ,i have them on two shotguns of mine.one more thing,make sure you clean area well with a cleaner ,i used regular rubbing alcohol it cleans good.
1 year, 5 months ago
by
 - uniontown, pa.
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting
1 year, 9 months ago
Answer this Question
0
0

Answers

Staff Answer
A: 
Item number 38-896-798-04 model TG941XD might fit. Per the chart below, this model fits NEW ENGLAND/H&R FIREARMS: Topper, Pardner, and Excell. Thanks

Gun Chart: http://www.truglo.com/images/Gun%20Chart.pdf

Thanks
1 year, 8 months ago
by
 - Springfield, MO
Read all my Q&A (read all my Q&A)
0
0
3 years, 5 months ago
Answer this Question
0
0

Answers

A: 
No. However, it's pretty good the way it is on a shotgun.
7 months ago
0
0
Vote as Best Answer
Thanks for Voting

A: 
no - but sliding them and patterning will nail it down.
7 months ago
0
0
Vote as Best Answer
Thanks for Voting

A: 
No, the rear sight is not adjustable, it is fixed. However i have found it to be accurate as is.
1 year, 8 months ago
by
 - Florida and Massachusetts
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

Top 1000 Contributor
Top 1000 Contributor
A: 
no,doesn't need to be,if you get the right one ,there's four diff sizes ,measure your vented rib width and order that width,don't go by the listings they listed mine as 1/4" and i measured it at 5/16" so a tip measure to be sure they are awesome sights and windage adj is not needed at all.hope i helped.
2 years, 4 months ago
by
 - uniontown, pa.
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
no
3 years, 2 months ago
0
0
Vote as Best Answer
Thanks for Voting
Details: 
I have a Stogger P350 with a red front bead that is on the gun solid
3 years, 5 months ago
by
 - Ontario Canada
Read all my Q&A (read all my Q&A)
Answer this Question
0
0

Answers

A: 
No, you install the TruGlo just behind it.
7 months ago
0
0
Vote as Best Answer
Thanks for Voting

A: 
no - i shot it behind my front bead. sat a bit higher so the bead was out of sight.
7 months ago
0
0
Vote as Best Answer
Thanks for Voting

Best Answer
A: 
No. I have a front bead on my Mossberg and I just put the front Tru-Glow right behind it (behind the bead toward the butt of the gun) Works Great! and still Glows Great!!
2 years, 11 months ago
1
0
Vote as Best Answer
Thanks for Voting

A: 
I had the same problem with my Benelli. The front sight is fixed and cannot be removed without cutting it off. You can just mount the sight behind the existing front sight and it seems to work fine. The new sight is a little higher on the barrel so no problem.
3 years, 2 months ago
0
0
Vote as Best Answer
Thanks for Voting
4 years ago
Answer this Question
0
0

Answers

A: 
I have part # 38-896-798-02 the 3/8 inch model on my Mossberg 835 and it's Great!!
2 years, 11 months ago
0
0
Vote as Best Answer
Thanks for Voting

A: 
you need to measure your rib with a caliper to get the right one. my rib measured 1/4 inch and i got a 1/4 inch and it was tight fitting.
3 years, 8 months ago
by
Anonymous
 - Annville, Pennsylvania
0
0
Vote as Best Answer
Thanks for Voting
5 years, 3 months ago
Answer this Question
0
0

Answers

A: 
I have one on my BPS 12 it works great my is 5/16", but I purchased my BPS the first year they came out. My gun is 29 years old. Measure your rib and order accordingly.
4 years, 6 months ago
0
0
Vote as Best Answer
Thanks for Voting

A: 
Measure the width of the ventilated rib. Once you have that, you know what size to buy. Good luck.
4 years, 6 months ago
0
0
Vote as Best Answer
Thanks for Voting
1 of 1
1 of 1

Need Help? 7 days a week: 7am to 10pm CT or call 1.800.227.7776 anytime