Trim or jack plate control at your fingertips with a column-mounted switch that looks great in any cockpit. You can keep your hands on the wheel and concentrate on driving. Bolts to most systems, including mechanical and hydraulic. All hardware included. Single-switch Pro-Trim®1000 mounts at 3 or 9 o'clock stalk positions; dual switch Pro-Trim® 2000 mounts at both locations.
Rated 5 out of 5 by BASSHUNTER10 Good product
Made very well, easily installed, and for many applications, but you do need some special tools.
April 20, 2013
Rated 5 out of 5 by Coopdawg Great product
Installation was simple with instructions provided. Provides an extra level of safety by being able to keep both hands on the steering wheel at high speed.
January 25, 2013
Rated 5 out of 5 by scn3957 Outstanding product
This was so easy to do. remove your steering wheel and connect 3 wires and your done!
How easy is that!
Thanks for a great product.
August 27, 2012
Rated 5 out of 5 by KubotaRTV Very nice
We are using the switch on the steering colum of a Kubota RTV to power an implement up and down. Its nice to have the switch at your fingertips at all times. So far it is holding up well but only had it about 2 weeks. The switch is getting used about 750-1000 times a day with out any flaws.
August 9, 2011
Per the manufacturer, people have done it but we do not recommend it, do to the shortage of space between the top of the bezel and the bottom of the steering wheel. That is why we offer the PT2000P. Thanks
The switch stays at the 3 or 9 o'clock position it is held in place on my boat by 3 screws that were provided, i had to use a steering wheel puller to remove the steering wheel and remove the 3 screws then place the tilt trim over steering shaft and reinstall the screws and put steering wheel back on took about 20 min,to install.