Swivl-EZE® Composite Transom Saver
Sale price:
Clearance price:
Starting at:
Sale starting at:
Clearance starting at:
Reg. price:
- Helps support the weight of your motor while trailering
- Head features two composite pads
- Anodized aluminum tube adjusts in length from 25" - 35"
- Dual roller/bolt-on bracket
The Swivl-EZE® Composite Transom Saver saves your transom by helping support the weight of your motor while trailering. Head features two composite pads. Anodized aluminum tube adjusts in length from 25" - 35". Dual roller/bolt-on bracket. Designed for motors 75hp and smaller with power tilt and trim.
Manufacturer model #: SP-400-RB.
Rated 4.6 out of 5 by 20
reviewers.
Rated 5 out of 5 by JeffE Transom Saver
I purchased a new 2013 Tracker Panfish 16, and the transom saver it came equipped with was very flimsy, so I went on the web site for Bass Pro Shop and found the type of Transom Saver that would hold my motor in position while traveling towing my boat. This Swivl-EZE was the perfect match for what I wanted. I did have to make a slight modification to it but just a simple drilling a hole lower down on the shaft so I wouldn't have to install the supplied bracket on the trailer. This is a great product and from previous experience with another boat I knew this was the product for me.
May 7, 2013
Rated 3 out of 5 by EMSTHOMR I LOVED IT UNTILL
THIS PRODUCT IS VERY NICE.IT WORKS GREAT,AND VERY E-Z TO INSTALL.THE ONLY PROBLEM IS I FOUND THE SAME THING AT LOCAL STORE AT 1/2 PRICE,AND NO SHIPPING.
August 31, 2012
Rated 5 out of 5 by SuperBradJ Transome Saved
Easy to install. Easy to assemble. Should save any long term damage from the motor bouncing around. Used for a 20hp Yammaha. Only complaint it the provided strap is too big for the motor.
August 7, 2012
Rated 5 out of 5 by John987 Works well
Bought this Swivl-EZE to replace a three week old Panther transom saver which had trouble keeping the outboard motor straight and the rubber developed a nasty crack after just three weeks of use at $65 it was sturdy just didn't work. The Swivl-EZE is considerably lighter being made of aluminum and it just works; the hard nylon/plastic V keeps the outboard straight while traveling, installation was a breeze as I drilled a hole for the trailer mounting bracket in the old panther bracket the adjustable aluminum square tubing provided ample adjustment to handle a wide range of applications. All in all very good value for the money, the only unknown is whether the aluminum will hold up over time, after two weeks of use it is holding up well.
July 26, 2012
13 Questions | 24 Answers
Outdoor Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
Expand All
Collapse All
(read all my Q&A)
Answers
A:
The only requirements are for motors 75hp and smaller. ThanksQ:
0 answers
Are you suppose to tighten down the bolts on the two plastic clamps that the motor lays in ?
Details:
2004 trailer as well?Answers
A:
The only requirements are for motors 75hp and smaller. Otherwise, yes it would work. ThanksAnswers
A:
Yes, this would work with your trailer. Designed for motors 75hp and smaller with power tilt and trim.Thanks
Details:
BOAT CARRIES 2003 SILVER EDITION BASS TRACKERWITH 25 HP MERCURY MOTOR
Answers
Top 250 Contributor
A:
simple answer yes, but not the best, i would say this is much better buy, the rubber feet will hold in place and not mark up the lower unit Item Number: 38-532-634-00A:
Yes, with no problem.1 year, 9 months ago
A:
ARE DESIGNED FOR MOTORS 75HP AND SMALLER WITH POWER TILT AND TRIM.Answers
Top 250 Contributor
A:
Will work just fineA:
Yes, with no problem.1 year, 9 months ago
A:
Designed for motors 75hp and smaller with power tilt and trim. If you have power tilt and trim then it will work.Answers
Top 250 Contributor
A:
will work like a champ, there are nicer ones but more money, so ask yourself how often do you need it, you do get what you pay for, there is a better model but twice the price, but they are more forgiving if the boat is not on the trailer straight it will have more give..bottom line this will work...
A:
No, This is designed for motors 75hp and smaller with power tilt and trim.Answers
Top 250 Contributor
A:
simple answer yes, but not the best, i would say this is much better buy, the rubber feet will hold in place and not mark up the lower unit Item Number: 38-532-634-00
A:
This is designed for motors 75hp and smaller with power tilt and trim.Answers
A:
worked good on mine without power trim. Just keep the supplied bungie tight and it is very snug.A:
It works on my 25 HP without power trim.
A:
No, This is designed for motors 75hp and smaller with power tilt and trim per the manufacturer.Details:
Tracker original trailer 40hp electric tiltAnswers
Top 250 Contributor
A:
simple answer yes, but not the best, i would say this is much better buy, the rubber feet will hold in place and not mark up the lower unit Item Number: 38-532-634-00
A:
This is designed for motors 75hp and smaller with power tilt and trim.
Get help about this item from fellow customers.
Ask your questions. Share your answers.
13 Questions | 24 Answers
