SeaSense® Load Mate Kit with Guide Poles

   

Sale price:

Clearance price:

Starting at:

Sale starting at:

Clearance starting at:

Reg. price:

Size:

48" High

Quantity:

Read product description
The SeaSense Load Mate Kit with Guide Poles is your personal boat launch and load assistant. The complete Load Mate Kit eliminates guessing ensuring you get the perfect launch or load depth the first time and every time. The Load Mate Kit's included high-visibility LED guide pole lights operate as red running lights while trailering and turn green when at the proper loading or unloading depth. An easy to install float switch alerts the driver when the trailer is at the perfect depth, eliminating the need for the driver to have to get out of the vehicle or depend on another person for help at the ramp. This Load Mate Kit also includes a complete guide pole kit with 48” poles and galvanized hardware that mounts to most trailers.

    Kit Includes:
  • Driver side light assembly with 16' marine tinned wiring
  • Passenger side light assembly with 9' marine tinned wiring
  • Mounting plate for float switch
  • Four self-tapping screws for mounting plate
  • Float switch assembly with white coiled wire from switch; 3' marine tinned wiring
  • Two mounting screws
  • Six blue piggy back wire connectors
  • Two 6'' pole secure bolts and nuts
  • One self-tapping screw for secure ground
  • Six galvanized wire clips
  • Four 12'' wire zip ties
  • Two 19.75'' x 17.125'' galvanized pole supports
  • Two sets of 3'' x 4'' U-bolts with mounting plates and hardware
  • Two 48'' PVC light support poles
Rated 5 out of 5 by 1 reviewer.
Rated 5 out of 5 by Loading made easy! Kit was simple to install and makes loading easy even in rough water. Galvanizing is a little on the sloppy side with runs but parts are well protected. Highly recommended. June 21, 2012
1-1 of 1
3 Questions | 3 Answers

Outdoor Answers

Get help about this item from fellow customers.

Ask your questions. Share your answers.

 
 
Browse Q&A
 
 
Sort by

Answers

A: 
It should work on just about any type of boat to keep the stern aligned on the trailer.
11 months ago
by
wwalker1959
 - Forney, Texas
Read all my Q&A (read all my Q&A)
0
 
 
0
 
 
 
 
 
Q: 
1 answer

diameter

Details: 
What is the diameter of the square tubing? is it aluminum, hot dipped galvanized? I have a trailer with 2X2 square tubing.....so any insert has to be smaller that that
1 year, 1 month ago
by
Maningding
Read all my Q&A (read all my Q&A)
Answer this Question
0
 
 
0
 
 
 
 

Answers

A: 
The PVC goes over the square tubing
The tubing is hot dipped galvanized.
10 months ago
by
Fudd
 - Indiana
Read all my Q&A (read all my Q&A)
0
 
 
0
 
 
 
 
Details: 
Don't want to drive down the road with the PVC on. Also, will have to weld these on since we have a trailor with flat "running board (metal)" on the outside edge. Has anyone done this before? Or does screwing them down work without ruining the running boards.
2 years, 9 months ago
by
jam44
 - dallas texas
Read all my Q&A (read all my Q&A)
Answer this Question
0
 
 
0
 
 
 
 

Answers

A: 
bolt on the side of running boards.Do not use ubolts. take sawzall and cut remainder of square tubing as close as possible to the installed uprights. Exactly what i did looks great adds maybe 6inches to either side.
2 years, 8 months ago
by
pilotgb
 - okc,okla
Read all my Q&A (read all my Q&A)
0
 
 
0
 
 
 
 
1 of 1

Get help about this item from fellow customers.
Ask your questions. Share your answers.

3 Questions | 3 Answers
1 of 1

Need Help? 7 days a week: 7am to 10pm CT or call 1.800.227.7776 anytime