Start transforming your kayak into a fishing machine with this Replacement Kayak Flush Mount Rod Holder. Rod Holder gives you a place to stow your rod and reel while moving between fishing spots or to hold different setups while fishing with another. A great choice to add another holder to your kayak or replace a damaged holder, this closed end holder design is great for use in kayaks. Constructed from injection molded ABS, this convenient fishing accessory stands up to outdoor conditions for a long time. Holder features a 30º design for tight, flush mount. Injection molded elastomer gasket (sold separately) ensures a sure, watertight seal after installation. Color: Black.
NOTE: Mounting hardware not included. Manufacturer recommends #10 Oval/Flat Head x 3/4” screw (sold separately) for installation. A longer or shorter length may be needed depending on boat material.
Manufacturer model #: K325162
Replacement Kayak Rod Holder Gasket sold separately and can be found through item search at item number 38-614-017-49
Rated 5 out of 5 by fishingJP Great addition to fishing kayak!
In the past I used the shock cord on the side of my boat to carry combos and I ended up with a few broken rod eyes. I installed 2 of these behind the seat of my kayak and they work great. They are easy to access and simple to install they also provide a safe place to carry my combos. I used a large paddle bit to cut the holes and stainless steel screws to mount.
November 8, 2012
Rated 5 out of 5 by bncntr Great holder
Great addition to our kayaks. Had it installed in 10 minutes. Recommend also getting the gasket or gasket/cap as it can also be used as a template for the hole you need to make. Great product!
October 15, 2012
Rated 5 out of 5 by kayakfishinginVT good price - good item
This item is exactly what I pictuered it to be. It installed easily and appears to be quite durable. Only issue was that the package should have included directions as to the size of the hole needed. It would have saved the time in measuring.
September 10, 2012
Rated 4 out of 5 by BRI5 rod holder
Appears to be same model factory uses, you’ll need the appropriate hole saw to install and be sure your kayak has enough access to allow you to use a socket or wrench for attachment unless you use rivets.
June 21, 2011