Rated 5 out of 5 by ocmd90 reload
A little work & save a lot , too shoot more .the brass is good , I shoot a lot , they save money so I can shoot more ...
February 21, 2011
Rated 5 out of 5 by SURESHOT35 excellent brass
I have been useing remington brass for many years and have had nothing but excellent accuracy and long life from cases.Both my remington 700 rifles are shooting 1/4 inch groups at 100 yards using remington brass,berger bullets and hodgdon powders.This brass is the best value on the market,have when't 5 reloadings on 300 win mag with no signs of problems.I shot two 1/4 inch groups yesterday using brass fired 5 times,you just can't get any better than that.
September 19, 2010
Rated 5 out of 5 by goodchicken Rem. cases
This is excellent brass. I get more average reloads with each case compaired to any brand in this price range. I use these for 30-06 with reduced loads for punching paper tagets these cases will get good amount of reloads. All the primer pockets were uniform and consistant. The weight of each case is consistant to each different one. The inside of the flash hole needed to be debured, and needed to be trimmed to lenght. The overall length wasn't bad at all, they really didn't need to be trimmed. I just always square them up so they are all the same (+/- .001 inch).
July 2, 2010
i dont know what bullets you are talking about but tif thay are fmj,compotion.then no use bullets that expand easy that is the trick look at the back of the round see if it ses 30/06 if not or if someone els reloaded it also no
these are the bulk brass cases used for reloading , they are not bullets , brass is a component as is a bullet and a primer and powder all these combined in the proper measure make a cartridge . a 30-06 cartridge is made up of these components as is a .223 cartridge and a 30-30 cartridge , please read a loading book