RAM Mounts® Swing Arm Mounts
Featuring a 6'' long bent swing arm, RAM's Swing Arm Mounts are perfect when you need extra vertical or horizontal extension so your large marine electronics are mounted at the perfect angle. Plus, the Swing Arm Mounts are built with two pivoting points which allow for complete 360° rotation. Compatible with Garmin®, Lowrance®, Humminbird®, Raymarine®, and Eagle® Sonar/GPS units.
Rated 4.8 out of 5 by 20 reviewers.
Rated 5 out of 5 by Bruiserhog Better than Most In replacing a previous locater, I found the mount easy to install and fit to my new locater perfectly. I didn't even have to drill new holes. April 23, 2013
Rated 5 out of 5 by Gunstable Perfect Fit I Purchased a Lowrance Elite 7 HDI for my new Tracker boat. The graph was too big to install where the smaller one was. The Ram Mounts Swing Arm Mount Made it easy to Install the new Graph and I can swing it to view from the front of the boat. This was one of my better purchases. April 23, 2013
Rated 5 out of 5 fit the bill the swing mount was just as illustrated and represented.is doing the job it was ment to.fit thlowrance finder as mentioned. April 9, 2013
Rated 5 out of 5 by Joker Missing Parts/ Mounting Options Some of the washers were missing and the package was not sealed all the way but one quick call and they were shipped out pronto. Someone else also said the same thing about missing parts. One thing they dont mention is that the vertical mount can be attached to a pole or round bar because it is designed with a "V" in the back nice touch. Very solid mount works great. Great USA product! September 8, 2012
8 Questions | 16 Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
A:The heavy duty Ram will work and is the only one I would trust with the larger units
A:No the mount on the 700 is square like and this mount is made for larger unit.
A:I have the same Fish finder i used those plastic straps to mount it to the top securely. The top of the mount doesnt have holes and the thing is made of steel and would take forever to drill holes in it. So a simple solution is to just use those straps once secured you can turn the fishfinder the other way and once mounted the fishfinder is adjustable ,you can turn it to your position.
Fits perfectly on my Porta/Bote
A:I don't think it would be that tough to remove. You could just unscrew the part of the mount that holds the fish finder from the part of the mount that is on the boat. When I say "unscrew" I mean just turn the knob that you would loosen to allow the fish finder to pivot on the base. Very simple to do and would take minutes.
A:It is very easy, there is a plastic washer that you have to be careful not to drop or loose.
A:It should mount up fine. The base plate has many pre-drilled holes. Can't guarantee all will line up but a drill will make short work of it.
Details:I have a Lowrance x100c fish finder and I wanted to know if there are any additional modifications I will have to make to this bracket for it to fit and work proerly?
A:At the device mounting end of the mount is a rectangular 6.25" x 2" plate.
A. Center of knob to center of ball socket: 6"
B. Overall length of swing arm assembly: 10.75"
C. Overall height: 5.6"
D. Height from base to top of knob: 4.91"
A:You will probably have to drill a new set(4) of holes in your boat for the base, but on the top side there is dozens of holes in the mount for many styles/brands of units.
A:No it is Solid Mount type.. I will work fine for the 1100 & 900 series Humminbird units.
A:No vibration properties built in to this mount but it will handle your 1197 with out worries. It is built VERY Stout. The knobs tighten to hold as you want it set even in rough water and the base can be removed very quickly for inside storage of your sonar.
Images for this Answer
(click to see full-size image)
(Click anywhere inside this popup to close it)
1 of 1
1 of 1