RAM Mounts® Swing Arm Mounts

   

Sale price: Clearance price: Starting at: Sale starting at: Clearance starting at: Reg. price:

Description
Quantity Price & availability

Horizontal Swing Arm

Verticle Swing Arm

Featuring a 6'' long bent swing arm, RAM's Swing Arm Mounts are perfect when you need extra vertical or horizontal extension so your large marine electronics are mounted at the perfect angle. Plus, the Swing Arm Mounts are built with two pivoting points which allow for complete 360° rotation. Compatible with Garmin®, Lowrance®, Humminbird®, Raymarine®, and Eagle® Sonar/GPS units.

    Horizontal Swing Arm Mount model RAM-109H:
  • Center of knob to center of ball socket: 6''
  • Overall length of swing arm assembly: 10.75''
  • Overall height: 5.6''
  • Height from base to top of knob: 4.91''
  • Rectangular base plate measures 6.25'' x 2''

    Vertical Swing Arm Mount model RAM-109V:

  • Center of knob to center of ball socket: 6''
  • Overall length of swing arm assembly: 11.4375''
  • Overall height: 8.45''
  • Rectangular base plate measures 6.25'' x 2''
Rated 4.7 out of 5 by 22 reviewers.
Rated 4 out of 5 by Great quality, and easy to install. It was easy to install and is strong enough to take a beating. March 8, 2014
Rated 5 out of 5 by solid Very solid unit, well worth the price. would buy again for sure if needed another, but this one will last longer than the fish-finder it is used for!!!! elite 7 lowrance. October 23, 2013
Rated 5 out of 5 by Better than Most In replacing a previous locater, I found the mount easy to install and fit to my new locater perfectly. I didn't even have to drill new holes. April 23, 2013
Rated 5 out of 5 by Perfect Fit I Purchased a Lowrance Elite 7 HDI for my new Tracker boat. The graph was too big to install where the smaller one was. The Ram Mounts Swing Arm Mount Made it easy to Install the new Graph and I can swing it to view from the front of the boat. This was one of my better purchases. April 23, 2013
2 3 4 5 6 next>>
8 Questions | 17 Answers

Outdoor Answers

Get help about this item from fellow customers.

Ask your questions. Share your answers.

 
 
Browse Q&A
 
 
Sort by
2 years ago
Answer this Question
0
0

Answers

A: 
The heavy duty Ram will work and is the only one I would trust with the larger units
2 years ago
0
0
Vote as Best Answer
Thanks for Voting

Staff Answer
A: 
Yes, it is compatible with Garmin®, Lowrance®, Humminbird®, Raymarine®, and Eagle® Sonar/GPS units. Thanks
2 years ago
by
 - springfield, mo
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting
2 years, 8 months ago
Answer this Question
0
0

Answers

Staff Answer
A: 
This type of mount works with the large marine electronics not he Elite. Try the Trapezoid Mounting Plate - RAM-B-107-1U item number 38-560-358-00.
2 years, 8 months ago
by
 - springfield, mo
Read all my Q&A (read all my Q&A)
0
0
3 years, 1 month ago
Answer this Question
0
0

Answers

A: 
No the mount on the 700 is square like and this mount is made for larger unit.
1 year, 7 months ago
by
 - Eufaula, AL
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
I have the same Fish finder i used those plastic straps to mount it to the top securely. The top of the mount doesnt have holes and the thing is made of steel and would take forever to drill holes in it. So a simple solution is to just use those straps once secured you can turn the fishfinder the other way and once mounted the fishfinder is adjustable ,you can turn it to your position.
Fits perfectly on my Porta/Bote
2 years, 8 months ago
by
 - brooklyn NY
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting
3 years, 2 months ago
Answer this Question
0
0

Answers

A: 
I don't think it would be that tough to remove. You could just unscrew the part of the mount that holds the fish finder from the part of the mount that is on the boat. When I say "unscrew" I mean just turn the knob that you would loosen to allow the fish finder to pivot on the base. Very simple to do and would take minutes.
2 years, 9 months ago
by
 - Kingston, ON, Canada
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
It is very easy, there is a plastic washer that you have to be careful not to drop or loose.
3 years ago
by
 - Franklin, KY
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
Just pull the sides out and the unit will pop right out
3 years, 2 months ago
0
0
Vote as Best Answer
Thanks for Voting
4 years ago
Answer this Question
0
0

Answers

A: 
Yes, stronger than the Ball mount I love mine,.
9 months ago
by
 - Eufaula, AL
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
Yes, I have hte 898c mounted and it's GREAT!
3 years, 10 months ago
by
 - S.E. Alabama
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting
4 years, 11 months ago
Answer this Question
0
0

Answers

A: 
It should mount up fine. The base plate has many pre-drilled holes. Can't guarantee all will line up but a drill will make short work of it.
3 years, 10 months ago
by
 - S.E. Alabama
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

Staff Answer
Expert Answer
A: 
Yes, model RAM-109V will work.
4 years, 7 months ago
0
0
Vote as Best Answer
Thanks for Voting
 
Q: 
3 answers

What are the dimensions?

Details: 
I have a Lowrance x100c fish finder and I wanted to know if there are any additional modifications I will have to make to this bracket for it to fit and work proerly?
5 years, 1 month ago
Answer this Question
0
0

Answers

Staff Answer
A: 
At the device mounting end of the mount is a rectangular 6.25" x 2" plate.
Dimensions:
A. Center of knob to center of ball socket: 6"
B. Overall length of swing arm assembly: 10.75"
C. Overall height: 5.6"
D. Height from base to top of knob: 4.91"
1 year, 10 months ago
0
0
Vote as Best Answer
Thanks for Voting

A: 
You will probably have to drill a new set(4) of holes in your boat for the base, but on the top side there is dozens of holes in the mount for many styles/brands of units.
3 years ago
by
 - South Louisiana
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
The base has many pre-drilled holes. It's just a matter of them lining up with your mount.
3 years, 10 months ago
by
 - S.E. Alabama
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting
5 years, 2 months ago
Answer this Question
0
0

Answers

A: 
No it is Solid Mount type.. I will work fine for the 1100 & 900 series Humminbird units.
1 year, 7 months ago
by
 - Eufaula, AL
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
No vibration properties built in to this mount but it will handle your 1197 with out worries. It is built VERY Stout. The knobs tighten to hold as you want it set even in rough water and the base can be removed very quickly for inside storage of your sonar.
Images for this Answer
(click to see full-size image)
User submitted photo
3 years, 10 months ago
by
 - S.E. Alabama
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting
1 of 1
1 of 1

Need Help? 7 days a week: 7am to 10pm CT or call 1.800.227.7776 anytime