Free Shipping on orders of $50 or more applies to economy shipping only to US and Canadian addresses on all internet or phone merchandise orders. (Canadian orders will be charged a $3.50 brokerage fee, duty and tax.) Excludes gift cards, orders shipped outside of the US and Canada, expedited or additional shipping and hazardous, special fees. Shipping charges on previous orders will not be reimbursed.
P-line's CX Premium Fluorocarbon Coated Line is one of the most innovative lines available, combining copolymer and fluorocarbon technologies. CX Premium eliminates spinning reel line problems with its low memory and improved limpness. The combination of low memory and limpness also improves casting distance with a baitcast reel. The fluorocarbon-silicone coating virtually eliminates water absorption so cold water and weather have little effect on line performance. With as much as 30% less stretch than average lines, it has increased sensitivity to detect and react to even the most subtle strikes. 300 yards.
Combines copolymenr and fluorocarbon technolgies
Low memory and improved limpness
Fluorocarbon-silicone coating virtually eliminates water absorption
I Bass fish on a regular basis on several different lakes through out Kansas and Missouri at least 3 to 4 times a week. I have used several different lines over the past few years and have finally dialed into a fishing line that I can count on for all my fishing techniques. Smooth casting, sensative and clear water is no problem. I use 8# up through 20# line and I am very pleased with its performance. P-line has really done their homework with this line and I wouldn't change the line on any of the 12 reels I use for my Bass fishing. Great job P-line.
August 31, 2007
I recently bought this line on a recomendation from a bait & tackle sales person because I was looking for a good floro.line. Needles to say I fish a clearwater lake in Fla., and lost a couple of nice fish because the line broke at the knot, I'm really disappointed in the way the line performed over all!!! I was using 6# test with the drag set loose as possible and still the line broke off at the hook and this was RIGHT OUT THE BOX!!!!
June 29, 2007
Strongest Copolymer Line
I switched to this particular line early this year and I have been very pleased. This line is a great combination of strength and sensitivity. I bounced around between several popular brands before making this line my main staple. The only drawback is the line does tend to have some memory. I usually change out line every three months, but I fish a couple times per week.
November 14, 2006
I fish this line in very clear water and I don't believe visibility is a problem. You are more apt to scare the fish with water displacement so I suggest you use the smallest diameter line you feel comfortable with.
Have just bought a box of 12lb test to re-line one of my BC reels. Use spinnerbaits quite a bit and this is the first time I have even bought this type of line and don't know much about it. My concern is based on reviews I've read this line sinks fast. I like to keep my SB near the top and want to know if this line will pull them down?
Not really, it doesn't sink like a 100% fluorocarbon. I fish 100% fluorocarbon on my spinnerbait rod and can keep it up top if I want so you'll be fine. CX Premium is a good line. It's small and strong, but it does inherit some fluorocarbon qualities. It's a little stiff, but that won't bother you with a baitcaster.
After trying dozens of lines the two that I like the most happen to be floroclear and CX. I do not know the specific differences between these two lines but it must have to do with slight differences in the materials used as the advertised diameter of CX is slightly different than floroclear for the same test rating. They both advertise as flurocarbon coated which makes them more slick than non flurocarbon lines. This makes it necessary to use the correct knot or it will slip. I had this problem initially when I used the clinch knot. P-Line recommends the palomar knot, the knot I now use and I have no problem with knot slippage. In fact I am very impressed with the knot strength using this knot. I preffer floroclear as I do not have problems with line twist like I sometimes do with CX, but I am very impressed with both lines when compared to other lines on the market.
If you mean "Does it reflect light under water" I am sure it does some. Even pure fluorocarbon is not "completely" invisible underwater. But I Trout fish with this line in 2# test and have had no problems catching Trout with it in the moss green.
Am using 12# CX on spinning reel. Line spooled on reel 4 months and had 3 breakoffs of fish less than 2# at knot after tying with improved uniknot. Always wet line before tie, and cut off 2 feet after each use. Love the way CX casts, remains limp, and avoids twist, but loosing confidence with strength at knot.
You need to use a "Triple loop knot" it is almost required for this line. What you do is feed the line through the eyelit three times and the wrap the line around the main line six time and then go back through the loops and pull it tight and there you go
just use a simple palomar knot and wet it well... it will hold and you have 95% knot thats fast an easy to tie and never slips out. this line also seems to hold well with a improved clinch knot too but I dont trust that knot with any braid or FC or in this case FC coated lines...the UNI is a great knot and you shouldnt be having problems with it... but like i said the Palomar knot is a fail safe and you can also go double palomar if you dont mind a little more tying time.. I use the Double palomar knot for braid and single palomar for FC lines.
I prefer the Palomer knot with this line but it should not break under the conditions you speak of. It is possible that you have a bad batch of line...it does happen. I have landed over a hundred White Bass with the 4# on a President spinning reel, and many of those fish were in the 3 pound range.
I use spinning reels 5 days a week for a total of about 240 days of fishing a year. It is the best line I have ever used on spinning reels. It is limp...casts great...no memory......and it is super strong! The 8# will cast like mono 6# on your spinng reel.
I just put it on a Daiwa Pixy BC reel and as soft as it is ide say it would work beautiful on a spinning reel... plus my dad uses spinning reels some times and he says its the best line hes ever used on one.. he says it handles even better then XL or Stren on them and its a FC coated line!!! thats impressive... I fish only Sun line FC Shooter or Daiwa braid but I spooled the pixy with this because how good my dad say it is and im impressed... its rock solid on hook sets to very little stretch and a very tough line indeed! buy some im sure you will enjoy it.
I would go with a high test line, like 15-20lbs. Actually, that's what I use for my top water lures(such as a Vixen or a Spook) and it works great. Its actually only a fluro coated line, so it still has more bouyancy than 100% fluro does.
I havent used this line much but it doesnt sink like 100% FC so it would work well im sure.. it does have very little stretch like FC lines so be sure to give the fish a little long to get the lure in its mouth before sitting the hook so you dont pull it away! if you want a great top water line that I can assure you works well for top is Stren magnathin.
this line is as supple as they come.. I just built me a new Pixilla on a Airy Red Daiwa Pixy and tried a spool of this because my dad loves it I bought 8# and this line is amazing on that bait caster so I would bet it will work awesome on any bait caster.. this line is VERY low DIA. its amazingly thin and cast like a rocket on the Pixy but that reel is in a lot of peoples opinion the best bait caster ever made so it cast any line well... but with it being so soft and thin it will cast great on any reel.
We will not share your email address or the recipient's email
address. We make no use of the email address or information contained in
these greetings except to complete the service as you have requested.