Offshore Angler™ Ocean Master® Inshore Baitcaster Low-Profile Baitcast Reel

   

Sale price: Clearance price: Starting at: Sale starting at: Clearance starting at: Reg. price:

Model
Retrieve
Gear Ratio
Other specs Quantity Price & availability

OM20HA

Right

6.4:1

Line Capacity:
12/230

Ball Bearings:
7+1

Max Drag:
17 Lbs.

Recovery:
28.0"

Reel Weight (oz):
10.5
  • Compact yet powerful low-profile frame
  • Deep, wide spool for easy casting and even line lay
  • 1-piece aluminum frame
  • Anodized forged aluminum spool  
  • 8-bearing system plus instant anti-reverse
  • Adjustable Radial Tuned Braking system  
  • 6-disc drag stack delivers up to 16.5 lbs. of drag pressure   
Our Ocean Master Inshore Baitcaster Low-Profile Baitcast Reel is going to be all over the inshore scene this year. It packs the performance of our acclaimed Ocean Master round reels into a compact--but no less powerful--low-profile palmable frame for easier handling of bull reds, trophy snook, big snappers, and more. The deep, wide spool offers easy casting and even line lay on the retrieve, and whether you load it with mono or braid you'll appreciate the extra line capacity. Built for bear on a 1-piece aluminum frame, with an anodized forged aluminum spool, powerful stamped aluminum handle, and an 8-bearing system featuring double-shielded stainless steel ball bearings plus instant anti-reverse. Externally adjustable centrifugal braking system for precise lure placement in any conditions. The 6-disc drag stack delivers up to 16.5 lbs. of drag pressure--enough to turn anything you're likely to encounter. Weight: 9.55 oz. Line capacity: 14 lb./174 yds. Line recovery: 28'' per handle turn. Gear ratio: 6.4:1.

Click to view product manual

Rated 4 out of 5 by 13 reviewers.
Rated 4 out of 5 by solid reel I have had the opportunity to use the reels this spring fishing for reds and specks and found the reels were smooth, light weight and easy to cast. Fishing into a stiff wind does cause more backlash problems than I like even with fine tuning the adjustments but overall a good reel. May 3, 2010
Rated 5 out of 5 by inshore 25# or less caught 8 sand bass 1 25"halibut 1 ST time worked great. Mike March 22, 2010
Rated 5 out of 5 by Excellent Quality & Value I have used this reel casting jigs, popers, top water and other artificial baits, fishing inshore in the Lower Chesapaeake, and the Outter Banks of NC. Easy casting, solid hook-ups, smooth drag. My fishing is for flounder, trout, stripper, red drum, etc.....I love to fish with light tackle for fish in the 15 to 25 lb range. This reel with a 7ft. medium fast action rod make a great combo. March 22, 2010
Rated 5 out of 5 by Look no more! I fish fresh and saltwater and since I live in Oklahoma, more fresh than salt. I was looking to cut my cost and quantity of equipment by purchasing 1 baitcast reel to handle both so I went shopping when it was time for a new baitcast reel. I purchased this reel with hopes that I had made the right decision and let me tell you what!!! This reel is so smooth and powerfull, I hammer Walleye and Largemouth bass to no end with this reel. If you're in the market for something of great quality and price, this is it!!! October 16, 2009
<<prev 2 3 4 next>>
6 Questions | 12 Answers

Outdoor Answers

Get help about this item from fellow customers.

Ask your questions. Share your answers.

 
 
Browse Q&A
 
 
Sort by
 
Q: 
1 answer

what is the warranty

2 years ago
Answer this Question
0
0

Answers

Top 25 Contributor
Top 25 Contributor
A: 
The reel has a one year limited warranty! If something goes wrong with the reel, and if it was a defective part bass pro will either fix it or replace it! They have a very good warranty service!
2 years ago
by
 - New-Brunswick, Canada
Read all my Q&A (read all my Q&A)
0
0
2 years, 5 months ago
by
Anonymous
Answer this Question
0
0

Answers

Top 25 Contributor
Top 25 Contributor
A: 
I have paired this reel with a 7' medium heavy, fast action Bass pro shop Bionic Blade XPS trigger rod! This set up works well for me, and for what I fish for!

Hope this helps?

Tight lines, and be safe!
2 years, 3 months ago
by
 - New-Brunswick, Canada
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

Staff Answer
A: 
Please see the Inshore Baitcaster Low-Profile Baitcast Reel/Inshore Extreme® Casting Rod Combos.
2 years, 5 months ago
by
 - Springfield, MO
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting
 
Q: 
2 answers

Brake system!

Details: 
How easy is the centrifugal,magnetic brake system, to set? Does this system work better than either one individual systems by itself?
2 years, 5 months ago
by
 - New-Brunswick, Canada
Read all my Q&A (read all my Q&A)
Answer this Question
0
0

Answers

Top 500 Contributor
Top 500 Contributor
A: 
its a 2 step operation you would have to st both so its not more difficult just takes longer to find the proper setting I like to have only centrifugal but that's just me
1 year, 10 months ago
by
 - New Jersey
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
it has a spool pressure on the handle side and a magnet spool brake on the opposite side for slowing it down before it hits the water. if you ajust both sides just right then u can cast it a mile and never get a rats nest.
2 years, 3 months ago
0
0
Vote as Best Answer
Thanks for Voting
2 years, 7 months ago
Answer this Question
0
0

Answers

Top 25 Contributor
Top 25 Contributor
A: 
The level wind stays stationary when you cast! As to which is better, move when you cast or not, is up to your preferences. Once you have mastered a baitcasting reel, I don't think it makes much of a difference! Maybe a little, but for the few extra yards you may gain doesn't make much of a difference unless the only thing you want is distance. I'd ratter have accuracy over distance! Hope this helps?

Tight lines, and be safe!
2 years, 3 months ago
by
 - New-Brunswick, Canada
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

Staff Answer
A: 
The levelwind mechanism should move from side to side when retrieving your lure.
2 years, 7 months ago
0
0
Vote as Best Answer
Thanks for Voting
Details: 
We bought the OceanMaster Casting Reel OM20HA. There were no instructions or guidelines in the box when we received the reel. My husband is wanting to understand how to make a change in the 6-disc drag system in case we need to do that. He would really like to have a breakdown on how to do that and how to take this apart.
2 years, 8 months ago
by
 - Texas Coastal Bend
Read all my Q&A (read all my Q&A)
Answer this Question
0
0

Answers

Top 500 Contributor
Top 500 Contributor
A: 
I think you can go on their website and see if they have schematics but it souldn;t be too hard just tacke the handle off and open the side plate just remember to lay down every part in sequence as you take it off so that you will be able to put it back together again
1 year, 10 months ago
by
 - New Jersey
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

Staff Answer
A: 
See poskwally's response regarding how to adjust the drag system. To obtain the instructions and schematic for your reel, please call 1-800-227-7776 and provide the model number. I'm sorry the instructions were not in the box.
2 years, 5 months ago
by
 - Springfield, MO
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

Best Answer
A: 
I don't have this reel but I am looking into buying one or maybe the model just below this one. But I do know that the drag setting on baitcast reels are pretty much all the same. Just turn the star adjustment just inside the handle to tighten and loosen the drag. There is no need to take the reel apart to adjust the drag. When you get line on the reel try to pull some line out to see how the drag is set. Then tighten or loosen the star to set it at your desired starting point. If you need to change it on the fly, tightening will give you more drag pressure and loosening will give you less drag pressure. I wouldn't take the reel apart unless you needed to give it a good cleaning and lubrication.
2 years, 8 months ago
1
0
Vote as Best Answer
Thanks for Voting
 
Q: 
2 answers

Good swimbait reel?

Details: 
Will this reel do well handling 10oz swimbaits?

Answers

A: 
I don't think so. 10oz might be too heavy for this reel. In my experience, I have used up to 3oz jigs and large swimbaits casting to strippers with 12lb test line. Once hooked up (my largest stripper using this setup was about 22lbs) this reel didn't seem to crack-a-sweat (I did), but it was a good test. I'll try heavier swimbaits this spring to try and get you a better answer, but I think 10oz might be too heavy.
4 years ago
by
 - Smithfield, VA
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
It Will handle them ok but personally I would go with something a little beefier
5 years ago
0
0
Vote as Best Answer
Thanks for Voting
1 of 1
1 of 1

Need Help? 7 days a week: 7am to 10pm CT or call 1.800.227.7776 anytime