Marine Tech Battery Energy Gauge - Two-Battery

   

Sale price: Clearance price: Starting at: Sale starting at: Clearance starting at: Reg. price:

Size
Quantity Price & availability

3.120" X 4.620"

  • Easily installed pre-wired panel
  • Measure charge in 2 battery installations
  • Internally lit gauge for day or night use
This two-battery energy gauge, with its attractive, easy-to-install pre-wired panel, lets you measure the percent of charge in two-battery installations, such as a starting battery and auxiliary battery. The gauge is internally lit for day or night use. Plus, the Battery Energy Gauge comes complete with easy to follow instructions for do-it-yourself installations.

Back plate size: 3.120'' H x 4.620'' W
Cut-out dimensions: 2.250'' H x 3.750'' W
Dial gauge measures: 2.25'' dia.
Rated 2.8 out of 5 by 9 reviewers.
Rated 5 out of 5 TWO BATTERY METER,GOOD DEAL INSTALLED THE METER,NO PROBLEM THE JURY IS STILL OUT TODAY AS I WILL CHECK BATTERY NEXT DAY.VERY EASY TO INSTALL.,WORKS WELL, NICE TO SEE BOTH BATTERYS AT THE FLIP OF A SWITCH. THE WORDS PREWIRED GOES FOR METER ONLY AND NOT THE LONG DISTANCE WIRES. February 8, 2013
Rated 1 out of 5 by JUNK LASTED TILL IT RAINED. 1 MONTH. IT DOES LOOK NICE. July 21, 2012
Rated 1 out of 5 by wont last i bought 2 of these returned one for another [warrented] all have stopped working the gauge face warps and sticks the neeedle has happened on all three i would like my money back for 2 of them is there any other type i have a bass boat and a pontoon to use them on June 1, 2012
Rated 1 out of 5 by Not moisture friendly Looks pretty, costs a pretty penny and a pretty good waste of money! Switch is not covered and lets moisture in and so does gauge. Worked good till it seen rain then it was all downhill. Needle stuck on full,switch was hard to move because it is not covered. POOR design but looks good. Save your money. Most fish locators have a battery gauge built in just use a battery switch to move from one battery to the other. I used it in a john boat with two batterys and a trolling motor only. February 25, 2011
2 3 next>>
1 Question | 4 Answers

Outdoor Answers

Get help about this item from fellow customers.

Ask your questions. Share your answers.

 
 
Browse Q&A
 
 
 
Q: 
4 answers

How big is this?

Details: 
My dash is about full, how much room will this gauge need?
5 years, 4 months ago
by
 - Charlotte, NC
Read all my Q&A (read all my Q&A)
Answer this Question
0
0

Answers

A: 
ABOUT 2in X 4in. VERY NEAT INSTRUMENT
1 year, 2 months ago
by
Anonymous
 - CENTRAL FLORIDA
0
0
Vote as Best Answer
Thanks for Voting

A: 
7 by 4 inches
3 years ago
by
 - Levittown, Pa
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
The unit has it own little panel, Wood Grain, 3" H X L 4 1/2". I had to trim the top and bottom edge with sand paper to get a good fit. You can take the Gauge & Switch out of the panel and use a drill bit and a hole saw to mount them in our panel. But if you go this route make sure you get the Switch right and use a lable maker to lable #1 & #2 batteries on your Switch.
3 years, 9 months ago
by
 - Bruceton TN
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

Staff Answer
Expert Answer
A: 
Back plate size: 3.120'' H x 4.620'' W.
Cut-out dimensions: 2.250'' H x 3.750'' W. Dial gauge measures: 2.25'' dia.
5 years ago
0
0
Vote as Best Answer
Thanks for Voting
1 of 1
1 of 1

Need Help? 7 days a week: 7am to 10pm CT or call 1.800.227.7776 anytime