Lyman® T-Mag Expert Deluxe Reloading Kit
- T-Mag II Reloading Press
- Universal case trimmer
- 1500 Micro-Touch Digital Electronic Scale
- #55 powder measure
- Universal priming arm
- Primer tray
- Auto primer feed
- Extra decapping pins
- 49th edition reloading handbook
- Primer catcher
- Deburring tool
- Powder funnel
- Quick-release turret system
- Case lube kit
- 7/8'' x 14 adapter for mounting #55 powder measure in press
Rated 4.7 out of 5 by 7 reviewers.
Rated 4 out of 5 by fisheverydaydave Good but not Great! This is a very GOOD starter set. If you plan to reload using small amounts of powder I would purchase a better powder measure. The one that comes with the kit is not all that good. December 23, 2010
Rated 5 out of 5 by tduke excellent choice Bought this kit for my son who was beginning to reload. Top quality ! The press works better than expected, and the scale is extremely accurate and easy to use. Added bonus is the copy of Lymans reloading manual 49th edition. January 6, 2010
Rated 5 out of 5 by brenton good choice I RECOMEND THIS PRESS TO ANY ONE. THIS IS MY FIRST EXPERENCE WITH RELOADING , AND WAS VERY EASY TO UNDERSTAND AND USE. FRIENDS THAT HAVE OTHER PRESSES ARE NOW WANTING TO ORDER THIS PRESS. July 4, 2009
5 Questions | 18 Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
Details:Will all bushings for shellholders work with this rig?
A:Yes Lyman has all necc dies and shellholders for this press
A:yes as long as they are 7/8-14 thread. they are almost every single one of them that way with the exceptio of .50 bmg
A:Yes RCBS dies can be used with it. I have Hornady 7.62 x 39 dies, .308 rcbs dies and Lee .45 acp dies.
A:Unless there is a T mag kit for shot shells I think you are out of luck. This is a metal cartridge reloader.
A:Manually using a handle on the side of the turret. The handle can pop out and be put back into the opposite side of turret to keep work area free of the obstruction.
A:It has a detent at each postion and a lock for use.
A:The Turret plate has a spring and ball bearing pinned into it that rides on a hardened steele plate that has detents in it and is drilled and roll pinned into place.
A:go to youtube look up the press you are enquiring about and i am sure you will find a video explaining this-- it may even be from the manufacturer
Top 1000 Contributor
A:The turret on the press is very well made and high quality. There is a handle the goes in the turret in one of 2 locations, and is very easy to move. It locks in the correct place each time you move it, with the dies positioned to do their job.
Details:and what extra parts parts or things will i need
A:Lymans T mag kits. It's a good press for the 7mm and has almost everything you need.
You will need dies. (bullet seating, decaping, sizing.). I like Redding. If you are reloading for only one gun I recommend a neck sizing die. You can get by with the built in primer but I suggest a hand primer. They are pretty cheap.
I recommend searching reloading on You Tube. There's some very informative videos. You can learn how to set up and use your dies. Tips on reloading general. Caring for equipment.
A:that appears to be everything you will need. Except i would trust a balance beam scale for absolute trueness. electronic scale tend to wander so it is something to look at. but for what you need to get started yes it is.
1 of 1
1 of 1