Free Shipping on orders of $75 or more applies to economy shipping only to US and Canadian addresses on all internet or phone merchandise orders. (Canadian orders will be charged a $3.50 brokerage fee, duty and tax.) Excludes gift cards, orders shipped outside of the US and Canada, expedited or additional shipping and hazardous, special fees. Shipping charges on previous orders will not be reimbursed.
The Hornady® Lock-N-Load® SST-ML™ Low Drag Sabots are devastingly accurate having the highest velocity and flattest trajectory performance on the market. The Hornady sabots are 50% easier to load than conventional sabots with a Patented Flex Tip™ design that delivers 200+ yard surgical performace. 50 caliber. 10 pack.
Used this 300 gr. sabot for a few years now. 100 grains tripple 7 out of an old Ruger. Easy to load and carry. Have 3 speed loaders on stock and it doesent get any easier than that. 50 to 135 yds dead on. Great knock down power with lots of expansion. Also have had a few thru and thru's. Haven't missed one yet. Keep up the good work Hornady.
November 25, 2011
Not For Traditions XLT
Thought i would give these a try before the upcoming season..they just don't work in my Traditions XLT Knoxx Anti-Recoil..6 to 9 inch groups at 100 yards with some flyers..not knocking the round...just don't work in my Traditions...sticking with the Barnes MZ Expander...1 to sub 1 inch groups at 100 yds..3 inch groups at 200 yds
November 21, 2010
Hornady Lock & Loads
I have been using these bullets for some time now.
The accuracy is equal to a high power rifle when I shoot these out of my Remington 700 Muzzleloader.
Easy to load and sure ignition with the 209 Primers and pellets.
October 19, 2010
Cant Beat Em'
I started shooting another brand in my CVA Buckhorn 5 years ago. After only about 10 rounds, I needed another choice. I was only able to shoot 6 inch groups at 100 yds. When I switched to the Hornandy stems, not only did my ease and speed of reloading increase, my accuracy increased to just under 1 inch at 100 yds. My friend had the exact same situation with his Knight muzzleloader. I can't say enough about how well these rounds work!
October 13, 2009
My question is can this be used without the sabot? I attempted to use one the other day and it squished the first pelletand had a missire so in order to use the bullets up Id like to try one without the sabot attached. Any help on that/??? thanks
if you use with out the sabot, you will not have the gas seal you need. you wont get accuracy because the bullet would be loose in the bore and wouldnt come in contact with the rifling. i would recommend using the sabot and try not seating the bullet so hard
No you can not. the round is to small try lubeing the bore with TC Natural Lube Bore Butter I am shooting a Remington Genesis with Pyrodex 50-grain pellets. Remington 209 Kleanbore Muzzleloading Primers Hornady 250-grain Low Drag Sabots and it works just fine. just keep youre gun clean. run a patch down the bore every therd to forth shot with some Cleaner on it and it shuld be fine. hope this helps you. FYI the Remington 209 Kleanbore primers are key to a clean gun.
We will not share your email address or the recipient's email
address. We make no use of the email address or information contained in
these greetings except to complete the service as you have requested.