Hornady Cam-Lock Bullet Puller
Works as advertised
Easy enough to setup, but will not allow ram to be fully raised like a regular die, so be careful and watch how you raise the ram. Product leaves very slight striations on pulled bullet but probably not nearly enough to affect flight. I would recommend this product when your kinetic bullet puller fails to work.
Uploaded image shows, barely, extremely fine striations left by puller (forward of cannelure, but not on ogive)
March 27, 2013
Great bullet puller
I wished I read the comments before, I bought an impact "hammer" style bullet puller. Yes they are a mess and you loose powder. I broke a collet on the 5th one.
So I wheat down to pick up this Hornady version. Truth be told, I had to go back for the collet... DON'T FORGET your COLLETS... Lost my mind I guess. Happens to us all. Installed it to my Dillon press and away I went. Easy easy and clean! I didn't loose any powder and the bullet is almost perfect.
Reloaded the pulled bullets into another set of rounds, 3/8 of an inch @ 200. So that was my proof that the bullets are not damaged.
I would recommend this bullet puller. It's best to buy a better product up front that buying it twice.
January 21, 2013
Hornaday Cam-Lock Bullet Puller
I purchased the Hornaday Bullet Puller because we had about 50 bullets to pull from a batch that flared out the neck on the case and they wouldn't cycle. This thing was AMAZING! It was worth every penny! We were able to pull all the bullets in about 5-10 minutes without damaging the bullets at all or spilling any of the powder.
Now we have a fantastic tool in the future if we have to pull a bullet again.
Do not hesitate if you are thinking about getting this, it worked flawlessly!
October 17, 2013
Good purchase--it works well
The bullet puller works very well...I purchased it primarily for high power bullets, 300 H&H and 300 Win Mag. So far works very well...set up is fast and easy, and it beats the devil out of beating the old pounder type bullet extractor...The collett comes seperate and has different sizes...
January 10, 2013