Hornady® Cam-Lock™ Bullet Puller Collets
Sale starting at:
Clearance starting at:
- For use with Hornady Cam-Lock Bullet Puller
- Makes bullet pulling faster and more efficient
- Range of caliber sizes
Designed for use with the Hornady; Cam-Lock Bullet Puller (sold separately), these caliber-specific collets make bullet pulling faster and more efficient. Hornady Cam-Lock Bullet Puller sold separately and can be found through item search for number 1485698
Rated 5 out of 5 by 4
Rated 5 out of 5 by JeffKC Works very well.
I had some French 7.5x54mm MAS ammo that I wanted to change the powder charge. I hate waste and wanted to be able to reuse my bullets. I purchased the Hornady Cam-Lock Bullet puller and the .308 caliber collet. It worked like a charm with no discernible marks to the bullets. I have used this puller with over 50 rounds (7.5mm MAS and 7.5 Swiss) over the past 2 months with absolutely no issues. Excellent product at a good price. One caution: Be sure to carefully follow the provided instructions. You can break the hardened steel collets if you over-tighten the collet and/or pinch the case neck by moving the cartridge too far into the die. Go easy as you do not need a very tight "grip" on the bullet even with tightly crimped bullets.
November 12, 2013
Rated 5 out of 5 by copperhead89 Works great
Needed to pull about 150 bullets that were loaded for 223 and wouldn't fit 5.56Nato. The Hornady collet worked fine and I liked the fact it was sold out everywhere but BassPro had itin stock.
April 2, 2013
Rated 5 out of 5 by catfishlarry Quality Product
This is a great product. Works well with the bullet puller. I feel that it's a little to high priced and would have bought more calibers if they would have been less expensive.
March 18, 2013
Rated 5 out of 5 by rockchalk06 Only collet for me
I have been using the Cam lock bullet puller for over 4 years now. This puller along with the collets is hands down the best puller on the market.
Hornady makes one for just about every caliber around. I load some wildcat rounds, and they make one for them as well.
Extra Collets are priced very reasonable compared to other brands. I have one for every caliber I load. Hammer type or inertia type pullers are cheap and dangerous. The collet type is very safe.
Packaging was great on the collets. I store my collets on a peg board and use them all the time. Some collets are over 4 years old. The packaging and the collet are all in perfect shape. I clean mine after every use. I just run a 45 caliber nylon brush down the inside, cleaning off all the dirt and grime, and wipe down with an oil soaked rag.
If your just getting into hand loading or a veteran, these collets along with the Hornady bullet puller are a must to fix your mistakes, save or re-use components or just deactivate a live round.
September 9, 2012
Need Help? 7 days a week: 7am to 10pm CT or call 1.800.227.7776 anytime