Everything Bass Flat Foot™ Recessed Tray for Trolling Motor Foot Control
Sale price:
Clearance price:
Starting at:
Sale starting at:
Clearance starting at:
Reg. price:
- Improves your posture
- Reduces back pain
- Reduces deck clutter
- Heav-duty aluminum construction
The Flat Foot Recessed Tray from Everything Bass comes in two sizes to accommodate both Minn Kota and MotorGuide trolling motors. It features a heavy-duty construction made with durable 1/8'' aluminum and a baked-on powder-coat finish. The Flat Foot installs easily in any brand boat and comes with easy-to-follow mounting instructions, cutting template, 2' of drain tube, and stainless steel mounting hardware. Made in USA.
Rated 4.8 out of 5 by 20
reviewers.
Rated 5 out of 5 by stully worked great
Installation was not too bad. I put it in my Champion. End result was well worth the trouble. Looks great, and is much more comfortable when fishing all day. Great for older guys like me.
April 7, 2010
Rated 5 out of 5 by stanthaman great product
This is one of the best things I have put on my boat.I dont feel like I am off balance now and it also helps your back.If you dont have one get one its not that hard to install and you'll like everything about it but the price.
March 28, 2010
Rated 5 out of 5 by 8theB8 Wow
Wish I did this alot sooner! What a difference in stability standing on the deck, way less back pain and way less deck clutter! A bit nerve racking cutting a hole in your boat but very mch worth it!
January 22, 2010
Rated 5 out of 5 by foxtrot expensive but worth it!!!
INSTALLED VERY EASY IN MY 1996 ASTRO BASS BOAT, ONLY TOOK ABOUT HOUR AND HALF. WENT FISHING NEXT DAY AND LOVED IT. NO BACK PAIN AT ALL. GREAT PRODUCT
April 10, 2009
13 Questions | 16 Answers
Outdoor Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
Expand All
Collapse All
(read all my Q&A)
Answers
A:
This is for Minn Kota or MotorGuide Trolling Motors only. ThanksDetails:
I would like to install this in a Tracker PT175. Will I have to put a portion of it under the front metal panel or will it fit between it and the storage locker under the seat pedestal?Answers
A:
Hole cut size for the Minn Kota model is 11 1/4 x 16 3/4 inches. Outside dimensions are 13 1/8 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 11 x 12 inches.Hole cut size for the MotorGuide model is 9 3/4 x 16 3/4 inches. Outside dimensions are 11 1/2 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 9 1/2 x 12 inches.
I hope this helps with the fit. Thanks
Images for this Answer
(click to see full-size image)
Answers
A:
The Minn-Kota model dimensions 11-1/4'' X 16-3/4''.Details:
I have an '08 Tracker 175 TXW. The rod locker is the middle front compartment. Will installing this interfere with my ability to store longer rods (7'6" or 7') in this center compartment?Answers
A:
Here are the size and a photo. I hope this helps. ThanksHole cut size for the Minn Kota model is 11 1/4 x 16 3/4 inches. Outside dimensions are 13 1/8 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 11 x 12 inches.
Hole cut size for the MotorGuide model is 9 3/4 x 16 3/4 inches. Outside dimensions are 11 1/2 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 9 1/2 x 12 inches.
Images for this Answer
(click to see full-size image)
Answers
A:
Item number 38-529-130-00 will be for the MotorGuide Motors. ThanksDetails:
more specifically, it is a 16 ft dura craft boat, and it starts a slight v hull rise in the front where the foot controll sits, making it impossible for the foot controll to keep from moving all over the boat floor.Thanks,
Pat
Answers
A:
No it cannot unless you build some kind of deck. I would not try to cut through the bottom of your boat
Top 10 Contributor
A:
Only if you want to cut a hole in the bottom of your boat and have the bottom part of the unit sticking out beneath the bottom of your boat.Answers
A:
The Flat Foot installs easily in any brand boat and comes with easy-to-follow mounting instructions, cutting template, 2' of drain tube, and stainless steel mounting hardware.38-529-128-00 MINN KOTA 11-1/4'' X 16-3/4''
38-529-130-00 MOTORGUIDE 9-3/4'' X 16-3/4''
Details:
Is the drain hole located in the front of the recessed plate(near front of boat) or on the back of the plate? My installation would have to be in a storage lid, so I need the details before ordering.Answers
A:
Hole cut size for the Minn Kota model is 11 1/4 x 16 3/4 inches. Outside dimensions are 13 1/8 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 11 x 12 inches.Hole cut size for the MotorGuide model is 9 3/4 x 16 3/4 inches. Outside dimensions are 11 1/2 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 9 1/2 x 12 inches.
A:
The Flat Foot installs easily in any brand boat and comes with easy-to-follow mounting instructions, cutting template, 2' of drain tube, and stainless steel mounting hardware.38-529-128-00 MINN KOTA 11-1/4'' X 16-3/4''
38-529-130-00 MOTORGUIDE 9-3/4'' X 16-3/4''
Answers
A:
38-529-128-00 MINN KOTA 11-1/4'' X 16-3/4''38-529-130-00 MOTORGUIDE 9-3/4'' X 16-3/4''
Answers
A:
The actual box that fits into your deck measures: Minn Kota 11 ¼” x 16 ¾” and Motorguide 9 ¾” x 16 ¾”.
Get help about this item from fellow customers.
Ask your questions. Share your answers.
13 Questions | 16 Answers
