Everything Bass Flat Foot™ Recessed Tray for Trolling Motor Foot Control
Sale price:
Clearance price:
Starting at:
Sale starting at:
Clearance starting at:
Reg. price:
- Improves your posture
- Reduces back pain
- Reduces deck clutter
- Heav-duty aluminum construction
The Flat Foot Recessed Tray from Everything Bass comes in two sizes to accommodate both Minn Kota and MotorGuide trolling motors. It features a heavy-duty construction made with durable 1/8'' aluminum and a baked-on powder-coat finish. The Flat Foot installs easily in any brand boat and comes with easy-to-follow mounting instructions, cutting template, 2' of drain tube, and stainless steel mounting hardware. Made in USA.
Rated 4.8 out of 5 by 20
reviewers.
Rated 5 out of 5 by bigfishken1 Great product!
Works great and quality is also. Should be standard equipment on top end boats.
February 6, 2011
Rated 5 out of 5 by garanglerGA Helps my back
A big help if you have back problems!!Easy to install.Kinda high in price tho.
January 1, 2011
Rated 5 out of 5 by captainrona Bass flatfoot
I was sceptical about how much difference the flatfoot would make but the very first time on the water erased all doughts.I have a lot more balance,and the cramps in my legs that i had before have disappeared or atleast been greatly reduced.I have already suggested that a buddy with balance challenges get one for his boat.Very good value concidering the benifits.
May 28, 2010
Rated 5 out of 5 by ifish2 No more back pain
I have had two back surgeries and each time I would spend time on the lake, I would pay for it for at least a couple of days. After installing this recessed tray, my back pain is "gone" after fishing. I do not know why it has taken so long for someone to event this product. It really works and is very easy to install. Installed in about 2 hours.
May 18, 2010
14 Questions | 17 Answers
Outdoor Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
Expand All
Collapse All
(read all my Q&A)
Answers
Top 10 Contributor
A:
Best to measure your footpedal and compare to specs for each unit.
A:
This is for Minn Kota or MotorGuide Trolling Motors only. ThanksDetails:
I would like to install this in a Tracker PT175. Will I have to put a portion of it under the front metal panel or will it fit between it and the storage locker under the seat pedestal?Answers
A:
Hole cut size for the Minn Kota model is 11 1/4 x 16 3/4 inches. Outside dimensions are 13 1/8 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 11 x 12 inches.Hole cut size for the MotorGuide model is 9 3/4 x 16 3/4 inches. Outside dimensions are 11 1/2 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 9 1/2 x 12 inches.
I hope this helps with the fit. Thanks
Images for this Answer
(click to see full-size image)
Answers
A:
The Minn-Kota model dimensions 11-1/4'' X 16-3/4''.Details:
I have an '08 Tracker 175 TXW. The rod locker is the middle front compartment. Will installing this interfere with my ability to store longer rods (7'6" or 7') in this center compartment?Answers
A:
Here are the size and a photo. I hope this helps. ThanksHole cut size for the Minn Kota model is 11 1/4 x 16 3/4 inches. Outside dimensions are 13 1/8 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 11 x 12 inches.
Hole cut size for the MotorGuide model is 9 3/4 x 16 3/4 inches. Outside dimensions are 11 1/2 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 9 1/2 x 12 inches.
Images for this Answer
(click to see full-size image)
Answers
A:
Item number 38-529-130-00 will be for the MotorGuide Motors. ThanksDetails:
more specifically, it is a 16 ft dura craft boat, and it starts a slight v hull rise in the front where the foot controll sits, making it impossible for the foot controll to keep from moving all over the boat floor.Thanks,
Pat
Answers
A:
No it cannot unless you build some kind of deck. I would not try to cut through the bottom of your boat
Top 10 Contributor
A:
Only if you want to cut a hole in the bottom of your boat and have the bottom part of the unit sticking out beneath the bottom of your boat.Answers
A:
The Flat Foot installs easily in any brand boat and comes with easy-to-follow mounting instructions, cutting template, 2' of drain tube, and stainless steel mounting hardware.38-529-128-00 MINN KOTA 11-1/4'' X 16-3/4''
38-529-130-00 MOTORGUIDE 9-3/4'' X 16-3/4''
Details:
Is the drain hole located in the front of the recessed plate(near front of boat) or on the back of the plate? My installation would have to be in a storage lid, so I need the details before ordering.Answers
A:
Hole cut size for the Minn Kota model is 11 1/4 x 16 3/4 inches. Outside dimensions are 13 1/8 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 11 x 12 inches.Hole cut size for the MotorGuide model is 9 3/4 x 16 3/4 inches. Outside dimensions are 11 1/2 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 9 1/2 x 12 inches.
A:
The Flat Foot installs easily in any brand boat and comes with easy-to-follow mounting instructions, cutting template, 2' of drain tube, and stainless steel mounting hardware.38-529-128-00 MINN KOTA 11-1/4'' X 16-3/4''
38-529-130-00 MOTORGUIDE 9-3/4'' X 16-3/4''
Answers
A:
38-529-128-00 MINN KOTA 11-1/4'' X 16-3/4''38-529-130-00 MOTORGUIDE 9-3/4'' X 16-3/4''
Get help about this item from fellow customers.
Ask your questions. Share your answers.
14 Questions | 17 Answers
