Everything Bass Flat Foot™ Recessed Tray for Trolling Motor Foot Control
Sale price:
Clearance price:
Starting at:
Sale starting at:
Clearance starting at:
Reg. price:
- Improves your posture
- Reduces back pain
- Reduces deck clutter
- Heav-duty aluminum construction
The Flat Foot Recessed Tray from Everything Bass comes in two sizes to accommodate both Minn Kota and MotorGuide trolling motors. It features a heavy-duty construction made with durable 1/8'' aluminum and a baked-on powder-coat finish. The Flat Foot installs easily in any brand boat and comes with easy-to-follow mounting instructions, cutting template, 2' of drain tube, and stainless steel mounting hardware. Made in USA.
Rated 4.8 out of 5 by 20
reviewers.
Rated 5 out of 5 by FlatFooter Flat Foot Saved my Back!!!!!
I love my flat foot!!!
Flat Foot has made it easier to fish all day long. The first time I used my Flat Foot made such a difference in my fishing, that I told my father and my tournament partner; they both installed them.
Installation was easy, took around an hour and a half, and was worth every minute.
Before Flat Foot, I would have to stretch my back at least twice an hour, and by the end of the day, I still could barely straighten up to walk to the truck.
My back has not gone out once since I installed it, I won't own another boat with out it.
August 22, 2006
Rated 3 out of 5 by JRanger Not if you have a Ranger
I bought this because I've had four back fusions and keeping my foot up on the pedal really cut down on how long I can stay in the boat. However when I read the reviews everyone said took about a hour and a half, they didn't have a Ranger when I cut out the template I found solid foam. The instructions say you may have remove some foam I have been removing foam for two days. Ranger fills every void even when I uncovered the drain pipe it is completely surrounded with foam there is no path next to it to lay the drain. I've been trying to clear a path under the front storage box to the floor drain but, it's not possible. so I am going to have to go through the box and let it drain into the box and go out the drain inside it. I still have to foam it all back in after I have the drain set. Think twice about this if you own a Ranger and if you still want it pay someone to install it and be prepared for a good size bill, they may quote about 200 but when they have to deal with all the foam I'm sure it will be much more. I think I'll like after I'm done but I'm not sure it will be worth the hurt it's put on me to install it. I will never trust another review on install time again either.
May 2, 2013
Rated 5 out of 5 by it8theB8 Amazing difference!
If I had to give mine up I might quit fishing?!!! Best money spent and best upgrade I have ever done to my boat!
April 17, 2013
Rated 5 out of 5 by triton00 Heaney duty
Very sturdy no worries with putting to much weight on pedal.
April 16, 2013
13 Questions | 16 Answers
Outdoor Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
Expand All
Collapse All
(read all my Q&A)
Answers
A:
This is for Minn Kota or MotorGuide Trolling Motors only. ThanksDetails:
I would like to install this in a Tracker PT175. Will I have to put a portion of it under the front metal panel or will it fit between it and the storage locker under the seat pedestal?Answers
A:
Hole cut size for the Minn Kota model is 11 1/4 x 16 3/4 inches. Outside dimensions are 13 1/8 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 11 x 12 inches.Hole cut size for the MotorGuide model is 9 3/4 x 16 3/4 inches. Outside dimensions are 11 1/2 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 9 1/2 x 12 inches.
I hope this helps with the fit. Thanks
Images for this Answer
(click to see full-size image)
Answers
A:
The Minn-Kota model dimensions 11-1/4'' X 16-3/4''.Details:
I have an '08 Tracker 175 TXW. The rod locker is the middle front compartment. Will installing this interfere with my ability to store longer rods (7'6" or 7') in this center compartment?Answers
A:
Here are the size and a photo. I hope this helps. ThanksHole cut size for the Minn Kota model is 11 1/4 x 16 3/4 inches. Outside dimensions are 13 1/8 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 11 x 12 inches.
Hole cut size for the MotorGuide model is 9 3/4 x 16 3/4 inches. Outside dimensions are 11 1/2 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 9 1/2 x 12 inches.
Images for this Answer
(click to see full-size image)
Answers
A:
Item number 38-529-130-00 will be for the MotorGuide Motors. ThanksDetails:
more specifically, it is a 16 ft dura craft boat, and it starts a slight v hull rise in the front where the foot controll sits, making it impossible for the foot controll to keep from moving all over the boat floor.Thanks,
Pat
Answers
A:
No it cannot unless you build some kind of deck. I would not try to cut through the bottom of your boat
Top 10 Contributor
A:
Only if you want to cut a hole in the bottom of your boat and have the bottom part of the unit sticking out beneath the bottom of your boat.Answers
A:
The Flat Foot installs easily in any brand boat and comes with easy-to-follow mounting instructions, cutting template, 2' of drain tube, and stainless steel mounting hardware.38-529-128-00 MINN KOTA 11-1/4'' X 16-3/4''
38-529-130-00 MOTORGUIDE 9-3/4'' X 16-3/4''
Details:
Is the drain hole located in the front of the recessed plate(near front of boat) or on the back of the plate? My installation would have to be in a storage lid, so I need the details before ordering.Answers
A:
Hole cut size for the Minn Kota model is 11 1/4 x 16 3/4 inches. Outside dimensions are 13 1/8 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 11 x 12 inches.Hole cut size for the MotorGuide model is 9 3/4 x 16 3/4 inches. Outside dimensions are 11 1/2 wide x 18 1/4 long x 4 inches deep. Inside floor dimensions are 9 1/2 x 12 inches.
A:
The Flat Foot installs easily in any brand boat and comes with easy-to-follow mounting instructions, cutting template, 2' of drain tube, and stainless steel mounting hardware.38-529-128-00 MINN KOTA 11-1/4'' X 16-3/4''
38-529-130-00 MOTORGUIDE 9-3/4'' X 16-3/4''
Answers
A:
38-529-128-00 MINN KOTA 11-1/4'' X 16-3/4''38-529-130-00 MOTORGUIDE 9-3/4'' X 16-3/4''
Answers
A:
The actual box that fits into your deck measures: Minn Kota 11 ¼” x 16 ¾” and Motorguide 9 ¾” x 16 ¾”.
Get help about this item from fellow customers.
Ask your questions. Share your answers.
13 Questions | 16 Answers
