Evercoat Marine Gelcoat Repair Kit
Not Complete Product
The instructions say to use the enclosed solvent to excess residue...there was no solvent enclosed. The instructions say to use enclosed plastic mixing cup, there was no enclosed mixing cup. Again, the instrucions refer to using the enclosed solvent, which was not enclosed. Lastly, the instructions say to use 600 grit sand paper, the sand paper that was enclosed was 100 grit. Before you get started, make certain you have everything you need.
May 29, 2006
I used this stuff to repair gel coat that was gouged down to the fiberglass - about the size of a half dollar.
I followed the very simple directions, and when I was done it was almost impossible to find the spot that had been gouged. I'd recommend it in a minute and wouldn't hesitate to buy more if needed.
June 5, 2010
This product was east to use and contained a mixture of pigments to match the color of my boat.
October 27, 2014
Worked wonders on mishaps to the bottom side of my boat due to rocky shorelines. Keep in mind this is NOT intended for major damage, as it works well for patching up chips and dings. Color matching will depend on your color spectrum knowledge if your boat color is ..... unique.
August 21, 2014