CLEARANCE Dock Edge® Floating Dock Hardware
- Hot dipped galvanized steel
- 9/16'' hole punches on 3-1/2'' centers
- Male and female connectors
Dock Edge Floating Dock Hardware is 1/4'' hot dipped galvanized steel, and each piece of hardware has 9/16'' hole punches on 3-1/2'' centers except where indicated. Slot sizes are 9/16'' x 1-5/8'' and all male and female connectors have a 3/8'' tab with a 7/8'' hole to fit a 3/4'' pin or bolt.
A. Inside Joist Corner - Used to mount stringers.
B. Female "T" Connector - Use with all styles of male connector hinges.
C. Chain Holder - Holds chain up to 1/2" to secure dock position.
D. Pipe Holder - Side leg holder allows for level variations.
E. Outside Corner - Use with backer plate or inside corners at outside ends.
F. Male"T" Connector - Use with all styles of female connector hinges.
G. Washer Plate - Used to prevent bolts pulling through.
H. Corner Pipe Holder 3" Inside leg holder with slots for varying wood thickness.
I. Inside Corner Connector Pin - Offers maximum strength when used with outside corner or connector hinge.
J. HD Pin - Used to join male and female connectors. 2'' H x 3-3/4'' L. 3/4'' diameter.
K. Male Corner Hinge - Use with all styles of female connector hinges.
L. Female Corner Hinge - Use with all styles of male connector hinges.
M. HD Connector Hinge - Use at both ends of ramps when connecting dock section to shore or joining multiple sections.
N. HD Corner Plate - Inside corner. For lighter duty applications where an outside corner hinge is not necessary.
O. HD Inside Corner with Anchor Chain Bar - Adds extra strength with its anchor chain bar. Accepts chain up to 1/2''.
P. HD Backer Plate - Must be used to sandwich the wood framing when another piece of hardware is not used. This prevents the bolts from working into the wood and the lock washers becoming undone.