Contura Switches
Sale price:
Clearance price:
Starting at:
Sale starting at:
Clearance starting at:
Reg. price:
- Stamped brass and molded nylon construction
- Rated at 20 amps
Made from stamped brass and injection molded nylon, these switches are rated at 20 amps and run on a 12V charge. They mount in a 13/16"x1-7/16" hole.
Switch B is illuminated when at ON position.
Rated 5 out of 5 by 5
reviewers.
Rated 5 out of 5 by Jason27183 great simple switch
I've used this switch before and it's performed very well. Simple, and works good.
January 21, 2013
Rated 5 out of 5 by Snowtree Great value
My switches on my 15 year old boat had finally decomposed to where they were a mess and these were easy to install and work great.
May 25, 2011
Rated 5 out of 5 by D007 Contura Switches
Great replacement switches. I had the old contura style that had a rubber coating on them and the rubber deteriorated on them leaving a sticky residue on my fingers. These are much better than that old style and replaced all the other ones perfectly.
May 27, 2010
Rated 5 out of 5 by Booyahfish Great products at competitive prices
Exactly what I wanted and for a reasonable price. Onl hold back was had to order online. Used as extra trim switch for bow of boat.
April 29, 2010
6 Questions | 10 Answers
Outdoor Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
Expand All
Collapse AllDetails:
I presently have Mcgill rocker switches. can these switch replace them?
(read all my Q&A)
Answers
A:
Yes, they will replace your McGill Switches. ThanksQ:
1 answer
would one of these switches make a good trim switch for my motor im looking for a water proof trim switch
Answers
A:
Yes, they would make a good trim switch item number 38-506-706-00. ThanksAnswers
A:
It is one complete housing, so yes, they are waterproof. Put waterproof grease around electrical connections when installing.Details:
The on/off/on illuminated switch has ONE terminal for light,other side of switch has 3 terminals. The 3 position Contura switches that I am replacing have one terminal for light and 4 terminals for wiring harness. Don't know which wire to leave off or which terminal to "double-up" on? My Champion came from factory with all Contura switches and I just received the 5 I ordered from BPS and am a little confused. Thanks JimAnswers
A:
FYI- Please call the toll free number for assistance 1-800-BASS-PRO.Details:
Hello,I have purchased a Rule Automated RM1100A, item number 38-532-807-00. I'm looking for the correct Contura switch that will allow me to use the Automated feature with this pump.
Answers
Top 250 Contributor
A:
I would use the illuminated off-on switch for the automated switch for the pump. The automated switch for the pump will automatically turn the pump off and you could leave the contura switch to the on position. When the pump comes on the light will tell you it's in use.
A:
I have a similar punp on my boat. a contura switch should work. itme number 38-506-702-00 is one that I have installed on my boat. Hope that helps.
A:
You need an ON/OFF/ON switch. Wire the auto to one pole and the manual to the other. Flip the switch one way and the pump will run manually, flip it the other way and it'll run in auto mode. Flip the switch to the middle and the pump will be off.Answers
Top 250 Contributor
A:
MM stands for monentary. Usually the off to monentary on switch would be used for a horn on the vessel.A:
Momentary On, meaning you have to hold the switch down for it to remain on, let go and it turns off. Used for horns or sometimes the manual portion of an automatic pump although I prefer to use the on/off/on for auto pumps.A:
I believe that "mm" designates a momentary contact switch.1 of 1
Get help about this item from fellow customers.
Ask your questions. Share your answers.
6 Questions | 10 Answers
1 of 1
