CMC Power Tilt and Trim
Sale price:
Clearance price:
Starting at:
Sale starting at:
Clearance starting at:
Reg. price:
- Heavy-duty aluminum construction
- Waterproof 12V marine hydraulic system
- Ideal for freshwater or saltwater applications
- Promotes quicker out-of-the-hole starts, increased top-end speed, better gas mileage
- Includes stainless steel hardware, wire assembly and switch
This is one tough unit with heavy-duty aluminum construction and waterproof 12V marine hydraulic system that's impervious to fresh and saltwater corrosion. Benefits include quicker out-of-the-hole starts, increased top-end speed, more prop clearance in shallow water and better gas mileage. Powerful and reliable motor provides 20° trim or 90° tilt. Available with or without dash-mount trim gauge. 6" setback increases boat stability and improves prop performance. The mount is pre-drilled for standard BIA bolt patterns (12-7/8" top holes on center, 9-7/8" bottom holes on center) and is rated for up to 130 HP outboards. Optional adapter kit for transom clamp motors and optional transom spacer for pontoon boats. Includes stainless steel mounting hardware, wire assembly and switch. 5-year structure warranty and 1-year hydraulic system warranty by manufacturer.
Rated 4.7 out of 5Â by 15
reviewers.
Rated 5 out of 5Â by tommyg773 good product
If your motor does not have tilt and trim, this product is a good choice to add it to your boat. I had a johnson 115 on mine and it worked flawlessly every time I took my boat out.
August 26, 2009
Rated 5 out of 5Â by snowskidr CMC PT-130- Simple installation!
This review is based on install only. i just installed it yesterday and i have not had it on the water yet.
This unit was very easy to install! I did it by myself with no crane for my motor. i have a johnson 40hp and here is how i installed it. 1st I put a floor jack under the motor and unbolted it. i slid the motor as far to one side of the boat as possible. i then mounted the new cmc unit. next i slid the motor and jack over to mount on the new unit. the final step was running the wiring. it was that simple! it seems to work great and i hope i am as happy with the longevity of the product as i was with the ease of installation. ill be testing it on the water tomorrow.
only complaint would be that i think the 2 relays should be closer to the switch so i could have mounted them under the console away from any water. i will probably extend the wires so i can do so.
June 5, 2009
Rated 5 out of 5Â by Indianace BJones
This is an excellent tilt/trim for motors that need it. It mounts easily with one buddies help. For those who are tired of hefting the ol' evenrude up all the time for the shallows or to put her on the trailer this is the ticket!
July 11, 2006
16 Questions | 27 Answers
Outdoor Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
 Expand All
 Collapse All
(read all my Q&A)
Details:Â
Can it be the motor and must I replace the complete unit or can i bye spares for the motor seperatly an if where in south africa.Answers
A:Â
Please contact CMC,You can reach Customer Service, Technical, or Parts Department:
By Email: customerservice@cook-mfg.net
By Phone: 580-252-1699 ext. 2
Answers
A:Â
Contact CMC,You can reach Customer Service, Technical, or Parts Department:
By Email: customerservice@cook-mfg.net
By Phone: 580-252-1699 ext. 2
Answers
A:Â
You may view the manufacturer web site or search online check with sites like youtube. I am sorry but we do not have a video on our web site. ThanksTitle: CMC
URL: http://www.cook-mfg.net/
Details:Â
Johnson 50 HP J50PLSSM on 18 ft Alweld.Answers
A:Â
PT-130 FEATURES: Rated for 130 H.P. and Smaller Motors. Standard B.I.A. Bolt Hole Pattern.Q:Â
2 answers
I have a 1995 Bass Tracker 17' with Mercury 40 hp motor. Will I have to extend steering cable to install?
Answers
A:Â
Yes you will probably have to. I have to use a cable holder on mine. I could not install the steering cable properly. I just used a clamp to hold the cable to my transom and it works just fine.
A:Â
PT-130 FEATURES: Rated for 130 H.P. and Smaller Motors. Standard B.I.A. Bolt Hole Pattern. They do not list info about having to extend. You might contact CMC.Q:Â
2 answers
will this fit on a 1978 70hp Johnson ? Will this be the only thing I need to install the the cmc on my boat?
Answers
A:Â
I have a 1976 70hp Johnson and it works fine. This is very easy to install. You may have to modify you steering cable but that is it. Believe me it is worth it. I would get a transom saver if you do not have one already.
A:Â
PT-130 FEATURES: Rated for 130 H.P. and Smaller Motors. Standard B.I.A. Bolt Hole Pattern.Answers
A:Â
PT-130 FEATURES: Rated for 130 H.P. and Smaller Motors. Standard B.I.A. Bolt Hole Pattern.A:Â
It has numerous predrilled holes for numerous different motors...it should work...I would trust it. It said the 130 was rated from 35hp to 140hpAnswers
A:Â
This will need to come off.A:Â
i left it on toholed the moter downDetails:Â
My motor is a Mariner and i dont exatclay how old is he. The model no. is 6E9L and the sérial no. is:422026. I would like to know if the power tilt &trin cmc 130 wil fit on my motor.Tank you.
Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
16 Questions | 27 Answers
