Boss Buck Free Choice Protein Feeder with Round Legs
Sale starting at:
Clearance starting at:
- Holds approximately 350 lbs. corn
- Holds approximately 300 lbs. large protein pellets
- Deluxe 2-in-1 Conversion leg set
- 3-way feeding height 40"
- All galvanized hardware and inserts
- Converts from protein to spin feeder in minutes
- Feed tubes have 10-degree angle
- Automatic Conversions Kit (sold separately)
The Boss Buck Free Choice Protein Feeder has 2-in-1 Conversion Legs. Sectional leg system converts between 75" Gravity Feed Height and 100" Automatic Feed height. The 350-lb. capacity hopper is constructed of Tough Roto-Molded HDPE UV-protected plastic that won't rot, rust or leak--the same process used to make white water Kayaks! Virtually maintenance-free, this best-selling hopper system CONVERTS between gravity and automatic in just minutes. Boss Buck's patented Free Choice Protein/Gravity Head makes it the most moisture-resistant free choice feeding system available. The custom-designed head features a 10-degree angle and 1'' overhang on the 4" feed ports. Any water that enters the tip of the feed port is dispersed through a drain hole in each port. This patented design features an internal cone that dispenses the feed evenly to all three ports. The user is able to control the feed flow of almost all feed shapes and sizes with an adjustable height inner sleeve. The double walled hatch style lid is slightly oversized for proper ventilation. The Polyethylene material achieves ambient temperature faster than steel or fiberglass feeders. Made in USA.
Manufacturer model #: 1.2A.P.Boss Buck Small 12V Feeder Conversion Kit sold separately and can be found through item search for number 1767177Boss Buck Shark Teeth Deterrent Strips sold separately and can be found through item search for number 1708026
Rated 4.9 out of 5 by 12
Rated 5 out of 5
by Dustyone New Protein Feeder
Just purchased and set up a new Boss Buck 350 lb protein feeder. Super easy for one guy to assemble and set up. Bass Pro didn't carry the feet/stake kit, so I ordered them directly from Boss Buck. Easy to fill standing on the ground, but I generally use a step ladder as I like to blend in a mix of feeds. Gravity flow is super smooth, and the lip at the end of the tube prevents spillage. I got the multiple height leg kit so I can convert it to a spin feeder later in the season if I want to.Seemed a little wobbly at first until I got some feed into it, then it locked down tight. The lid mechanism works great. There were several wind advisories out in W TX where I set it up (up to 50 mph straight line winds) and it's still standing! Biggest positive is that I have 5000 photos on the trail cam, and the raccoons seem to stay on the ground - no climbing up on the feeder and scooping out the feed. It may be that they're intimidated by the deer, who hover around the feeder constantly.
Overall, I am very pleased with the feeder. Too early to tell on durability, but it's built solidly. My only recommendation to the rest of my hunting group would be to get the next larger size, as the deer just rip through the feed!
March 19, 2013
Rated 5 out of 5 by solohunter Best feeder for price
This is a top of the line feeder with a low price. Couldn't be happier with my purchase! Very dependable and easy to move around when I want.
January 17, 2013
Rated 4 out of 5
by Hunterbill good overall
I bought two of these feeders when they first came out. I take my feeders in at the end of march and put them out in Sept. I have the big timers and they hang from drill stem pipe I built and set in the ground. Two problems I have had are the paint flaking off of the timers and squirrels eating through the top and side of the feeder body. The timers last all season on a single battery charge and are very dependable. The feeder is easy to load on the double pulley crank system I made.
July 15, 2012
Rated 5 out of 5 by Taverna14 Excellent design
I just picked up my protein feeder from bass pro and I am very impressed with the design and materials used. Very easy to assemble and solid. Should have bought one sooner.
April 1, 2012
Need Help? 7 days a week: 7am to 10pm CT or call 1.800.227.7776 anytime