Free Shipping on orders $99+. Use code 99FREE

Enter promo code '99FREE' in the "Enter Promotion Code" box at checkout

You may also order by calling 1-800-BASS-PRO (1-800-227-7776). Give the phone representative key code L4BF

Free Shipping on orders of $99 or more applies to standard shipping only to US and Canadian addresses on all internet or phone merchandise orders. (Canadian orders will be charged a $3.50 brokerage fee, duty and tax.) Excludes gift cards, orders shipped outside of the US and Canada, expedited or additional shipping and hazardous, special fees. Shipping charges on previous orders will not be reimbursed. Cannot be combined with other promotion or offers.

Beartooth™ Comb Raising Kits

   

Sale price: Clearance price: Starting at: Sale starting at: Clearance starting at: Reg. price:

Other specs Quantity Price & availability
Product Color:
Mossy Oak Break-Up
  • Increase shooting comfort and accuracy
  • Non-adhesive installation
  • StockGuard Smoothskin
  • 2.33 mm rubber-backed neoprene padding
  • Five cheek pad sizes (1/8", 1/4", 3/8", 1/2", 5/8")
The Beartooth™ Comb Raising Kits are easy ways to increase your shooting comfort and accuracy without resorting to expensive gunsmithing. Precision padding system installs easily on any straight-stocked rifle or shotgun—no adhesives needed. This affordable ''cheek riser'' promotes proper eye alignment with your scope or bore sight. The padding also reduces recoil to your cheek. StockGuard Smoothskin that won't slip, slide, or stretch out—constructed of heavy-duty 2.3 mm rubber-backed neoprene that can stretch to install and fit to most stocks. Stack to create any comb height with the five sizes of cheek pads included (1/8", 1/4", 3/8", 1/2", 5/8"). Comb size: 9” long, 10” circumference at butt, and 3.75” towards the fore end. Made in USA.
Rated 3.9 out of 5 by 12 reviewers.
Rated 3 out of 5 by works okay once it's on I purchased the comb raising kit while trying to decide whether to have an adjustable comb installed on a shotgun. This kit has a variety of foam pads that will get you almost any height you'd need. Try using blue painters tape to keep the foam pieces in place while putting on the neoprene sleeve. Once installed, the sleeve and foam pads are pretty solid. Getting the sleeve on, however, is a real pain in the rear. Do not consider this something to install and remove repeatedly. Frankly, what you get (a stitched-together piece of neoprene and a few shaped foam pieces) seems pretty meager for the price, but it did what I wanted it to. April 10, 2012
Rated 5 out of 5 by It puts you in place Bty trying the varous heights of the comb rest; you can decide what heigth you need and then just slide the sleeve on and it puts you in place, just as you ordered. June 7, 2011
Rated 5 out of 5 Excellent Product After researching online for a comb raising kit, I found this one at a very reasonable price and the camo pattern that matched my gun. Order was easy and shipping was about 4 days. The instructions were clear and I installed the kit in about 10 minutes, including reading the instructions. This kit will raise the comb from 1/4 inch to almost 1 1/2 inches if needed. I tried the shotgun the next day, to pattern for turkey season and it was a perfect fit and it reduced the felt recoil as my cheek now has proper stock weld with a holographic sight installed on the shotgun. Thanks for a great product and a great price. I installed it on a Benelli nova, youth model 20ga. Using Hevi-shot Hevi13 #6 shot, it is a turkey killer. I have shot 2 so far with it, one at 12 yards and 1 at 42 yards. May 3, 2011
Rated 5 out of 5 by Awsome product I was having a problem with my new 870 Remington actually hitting anyting. I bought it for duck season and was missing like crazy. I took it to the sporting clays range and was hitting less that 50% of the clays. After working with it a while and seeing no improvement, I finally determined that when I shouldered the shotgun to shoot my right eye was looking down the right hand side of the barrel (right handed shooter) not at the rib rail and bead. I was able to correct this problem with this kit using the 1/4" thick pad. We took it to the range this past weekend and I was hitting over 90% of the clays. All mass produced shotguns are made pretty much "one size fits all", unfortunately we aren't all built the same. In short the biggest problem with the shotgun was that it did not fit me, now it does.I feel that if you are having any sort of shooting problem with your shotgun this product would be a definate good start at getting things better. April 6, 2009
<<prev 2 3
1 Question | 2 Answers

Outdoor Answers

Get help about this item from fellow customers.

Ask your questions. Share your answers.

 
 
Browse Q&A
 
 
Details: 
some comb risers aids are right/left handed specific
8 months ago
Answer this Question
0
0

Answers

A: 
Yes, I'm a leftie and I use this product. The foam pads are symmetrical, and you can place them right on top of the stock, so it's essentially ambidextrous.
5 months, 1 week ago
0
0
Vote as Best Answer
Thanks for Voting

Staff Answer
A: 
This can be used on right or left stocks.
5 months, 3 weeks ago
0
0
Vote as Best Answer
Thanks for Voting
1 of 1
1 of 1

Need Help? 7 days a week: 7am to 10pm CT or call 1.800.227.7776 anytime