Beartooth Comb Raising Kits
Does the Job
This comb raiser kit works very well on my .22. Needed it to raise the comb, so my eyes could be level with the scope. Used the 2 biggest pieces & it worked well. I did have a hard time getting the neoprene over the foam though, it was a bit of a struggle. Hopefully won't have to take it off, as I wouldn't want to have to put it back on again or change it in any way. I quite like the comfy neoprene on my cheek.
March 21, 2013
I began looking for a leather lace-up comb. A gunsmith friend of mine recommended this comb. I tried it and liked it so well that I ordered a second one for another rifle. It fits the stock snugly and the spacers allow you to adjust the comb height perfectly. It is a bit tight to get on, but if installed properly, it is worth it.
May 13, 2014
I was having a problem with my new 870 Remington actually hitting anyting. I bought it for duck season and was missing like crazy. I took it to the sporting clays range and was hitting less that 50% of the clays. After working with it a while and seeing no improvement, I finally determined that when I shouldered the shotgun to shoot my right eye was looking down the right hand side of the barrel (right handed shooter) not at the rib rail and bead. I was able to correct this problem with this kit using the 1/4" thick pad. We took it to the range this past weekend and I was hitting over 90% of the clays.
All mass produced shotguns are made pretty much "one size fits all", unfortunately we aren't all built the same. In short the biggest problem with the shotgun was that it did not fit me, now it does.I feel that if you are having any sort of shooting problem with your shotgun this product would be a definate good start at getting things better.
April 6, 2009
Given the tightness of the neoprene sleeve this is not an aid that you want to be removing and replacing frequently. Unfortunately the bolt of my TC 30.06 cannot be extracted with the comb raiser in place. I have tried to cover the pads with removable stock sleeves but have not found one which satisfies the situation
September 29, 2013