Free Economy Shipping on orders $75+ No code needed.

Select the "Economy Shipping" option at checkout.

Free Shipping on orders of $75 or more applies to economy shipping only to US and Canadian addresses on all internet or phone merchandise orders. (Canadian orders will be charged a $3.50 brokerage fee, duty and tax.) Excludes gift cards, orders shipped outside of the US and Canada, expedited or additional shipping and hazardous, special fees. Shipping charges on previous orders will not be reimbursed.

You may also order by calling 1-800-BASS-PRO (1-800-227-7776). Give the phone representative key code L5HS.

Bass Pro Shops XPS Intelligent Technology Series Onboard Marine Battery Charger - XPS iT 4/4

   

Sale price: Clearance price: Starting at: Sale starting at: Clearance starting at: Reg. price:

Size
Description
Quantity Price & availability

8-7/8"L X 5-3/16"W X 2-5/8"H

2 Banks 4 Amps

  • $119.99

  • SKU: 1759706

  • In Stock
  • Include 2 Yr Premium Accident Protection Plan

  • Add to Cart

    Add to Wish List

The ultralight Bass Pro Shops® XPS® Intelligent Technology Series Onboard Marine Battery Charger does everything but catch the fish! 4th generation XPS iT Series features Digital Intelligent Technology for extreme performance and ease of use. 5' AC and DC cable lengths. Manufacturer's two-year warranty.

XPS Generation 4 Intelligent Technology
Digital Pulse charging technology with precision software control for multi-stage charging. Real time ''Check battery bank'' LED service indicators identify errors in installation wiring or failing batteries.

50% Lighter Design
These chargers are the lightest in the industry! Super-lightweight composite design is 50% lighter than all previous iterations!

Go Fish! Indicator
Bass Pro’s Go Fish! indicator lights up when it's time to go fish with fully charged batteries. Plug and Play; iT will do the rest.

Digitally Controlled Multi-Stage Charging
Extreme performance digital charging conditioning and full-time maintain modes with innovative 21-day pulse reconditioning mode for maximum battery health during periods of short- or long-term storage.

Intelligent Battery Bank Monitoring and Indication
Active battery bank monitoring with LED trouble indicators per battery which will only illuminate if a battery is lower than two volts or is mis-wired during installation.

Transfer-On-Demand® Technology
Automatically maintains your engine battery while distributing up to 15 amps to your trolling motor batteries when needed. Ensures 100% of the available charging amps are fully utilized to meet the demand of each battery on board.

Digital Display and Battery Type Selector
Industry’s largest EZ-View AC Power-On blue light ring and tri-color status bar indicating charging, conditioning, maintain, and battery health modes. Battery type LED for selected battery type charge profile.

Dynamic Thermal Output Control
Control charging amps while maintaining recommended charger temperature, maximizing safety and efficiency.

Easy and Safe Operation
Dual inline fuses, over-voltage, over-temperature, reverse polarity and ignition protection. Designed and constructed to Marine UL 1236 and FCC Class A.

  • 12/24V, 8 Amps, 2 Banks
  • XPS generation 4 intelligent technology
  • 50% lighter design
  • Go Fish! indicator
  • Digitally controlled multi-stage charging
  • Intelligent battery bank monitoring and indication
  • Transfer-On-Demand® technology
  • Digital display and battery type selector
  • Dynamic thermal output control
  • Easy and safe operation
Bass Pro Shops® XPS® Intelligent Technology Series On-Board Marine Battery Charger - XPS iT 4/4 4.2 5 21 21
best of the best this battery charger can do lots tells whats wrong if any is with the battery and tells when time to go fishing get one u will love it March 22, 2012
good charger This is a good charger and works fine. Make sure you buy some stainless steel screws because there isn't any hardware included with it!!!!!! March 7, 2012
reliable,dependable product I just finished replacing the last model of the XPS series battery chargers. The old one lasted 4 years to the month of purchase. 8/2007 to 8/20011. The current model is full proof, it even discovered a fault in my electical house wiring. Here in the hot southwest I unplugged my charger during the 100+ temperatures. It kept the batteries from boiling away. One recommendation: write down the serial number before installation, I didn't and I had to dismount tne charger to get the number from the bottomside. September 29, 2011
great product This device works just great. It's the third one that I have bought from Bass Pro. ( 3 different boats ) It is easy to install, just four little holes drilled, and connect your battery wires. Sure beats messing with a regular battery charger and doing one battery at a time. Just plug in your extension cord and you leave it plugged in all winter if you want, the charger will work as needed. July 18, 2011
21 Questions | 40 Answers

Outdoor Answers

Get help about this item from fellow customers.

Ask your questions. Share your answers.

 
 
Browse Q&A
 
 
Sort by
4 months, 3 weeks ago
Answer this Question
0
0

Answers

Staff Answer
A: 
Battery(s) are not charging, Blue AC Power Light Ring, RED Charging and Battery Type LEDs are on
Confirm all charger cables are installed with the correct polarity connections at each battery, and that all connections are clean and tight. Confirm that there are no Bank Trouble Status LED indicators on. If they are check the battery and battery, connections at the battery indicated on the unit. Note: Incorrect wiring will result in reverse polarity or high reverse voltage, in the event this happens, the XPSiT Charger has been designed to not fail as a result, however it will cause the charger to "internally disconnect" and provide "no output" until the (reverse polarity) caused by putting the "Red" + lead on a – negative battery terminal) and/or the (high reverse DC voltage caused by taking one bank cable and spreading it across two batteries) is corrected, using the wiring diagrams as shown on pages 11-18. With the charger on, read DC voltage at each battery. If any of the readings are, less than 13 Volts DC proceed with the following:
A. Disconnect AC power at the 120VAC outlet.
B. Go to pages 11-18 of this manual and confirm your XPSiT model charger is connected correctly as illustrated in the installation drawings.
C. upon Completing B above; Plug your charger into AC Power and observe the LED center. Charger should be in the charging Mode (Charge Status Indicator should be Red). If after completing a full charge cycle, 10-12 hours or more for deeply discharged or completely dead batteries, the Charge Status Indicator should be Green and the Go Fish! Indicator should be on as well as the Blue AC Power Light Ring.
Note: If a Digital Volt Meter (DVM) is available to you, instead of waiting to complete a full charge cycle, you can simply use a DVM and take DC voltage measurements across each 12-volt battery. As long as the voltage continues to increase while the red charging LED is on, this will serve as a confirmation that the charger is properly connected and is properly charging.

Thanks
2 months, 2 weeks ago
by
 - Springfield, MO
Read all my Q&A (read all my Q&A)
0
0
Details: 
ed the first generation had a lot of problems but now again???????
6 months ago
by
 - portage,in
Read all my Q&A (read all my Q&A)
Answer this Question
0
0

Answers

A: 
My charger only lasted seven months. Great product, easy to use. But I'm concerned about how long it lasts.
5 months, 3 weeks ago
0
0
Details: 
I have 2 marine batteries. One for trolling and one for engine start. They arent in series just set up seperately. Will this unit charge both or do they have to be in a series?
6 months ago
Answer this Question
0
0

Answers

A: 
They cannot be wired together in any fashon for this charger. Sounds like it will work well for you.
5 months, 2 weeks ago
by
 - Las Vegas,NV
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
Yes,
My cranking battery and trolling battery are seperate and it charges them no problem. But mine didn't last very long though (seven months).
5 months, 3 weeks ago
0
0
Vote as Best Answer
Thanks for Voting
6 months ago
Answer this Question
0
0

Answers

Staff Answer
A: 
Manufacturer's two-year warranty
6 months ago
by
 - Springfield, MO
Read all my Q&A (read all my Q&A)
0
0
Details: 
Can one of the battery's cables [ from the charger] be longer than the other, i.e. 5' to one battery and 15' to the other? Are each of the wire pairs themselves balanced or matched, or can the positive lead be shorter/longer than the negative lead?
7 months ago
by
 - Texas, God's Country
Read all my Q&A (read all my Q&A)
Answer this Question
0
0
Details: 
I have a 24V trolling motor, 2 each 12V batteries and your 2 bank charger. The batteries are connected for 24V; i.e. battery 1 positive is connected to battery 2 negative. Does the jumper between the 2 batteries prevent me from connecting your charger bank 1 to battery 1 and bank 2 to battery 2?
7 months ago
Answer this Question
0
0

Answers

Staff Answer
A: 
This is a 2-bank battery charger designed to charge 2 batteries at once. One bank cable connects to no more than one battery. Below is a photo for two 12 V Batteries connected with a series jumper for a 24 V trolling Motor. Thanks
Images for this Answer
(click to see full-size image)
User submitted photo
7 months ago
by
 - springfield, mo
Read all my Q&A (read all my Q&A)
0
0
7 months ago
Answer this Question
0
0

Answers

Staff Answer
A: 
This is a 2-bank battery charger designed to charge 2 batteries at once. One bank cable connects to no more than one battery. Below is a photo for two 12 V Batteries connected with a series jumper for a 24 V trolling Motor. Thanks
Images for this Answer
(click to see full-size image)
User submitted photo
7 months ago
by
 - springfield, mo
Read all my Q&A (read all my Q&A)
0
0
7 months ago
Answer this Question
0
0

Answers

Staff Answer
A: 
How long will it take to charge my batteries?

A. The following equation will give you a good idea of how long it will take to charge batteries.

Total Amp Hour capacity of the batteries
------------------------------------------------
Total amperage output of charger
= Total Hours To Charge Batteries

Example: 100 amp hour battery / 10 amp charger = 10 hours

If you drain your battery half-way (50%) then you would need to put 50 amps back into it. Based on the above equation it would take you 5 hours to charge the battery.

If you have more than one battery, you will have to add up the amp hour capacity of all the batteries and then divide by the total amp output of charger to get charge time.

Thanks!
7 months ago
by
 - springfield, mo
Read all my Q&A (read all my Q&A)
0
0
8 months ago
Answer this Question
0
0

Answers

Staff Answer
A: 
The charge Mode status light bar:
Flashes Red during the self test mode (approximately 1-2 minutes)
Glows Red during Charging
Glows Amber during conditioning
Glows green when Read and the “Go Fish!” indicator is illuminated
Pulses on and off Green when performing 21 day maintenance mode
Bank Trouble Status: Red LED indicates a problem or fault at one of the batteries connected to the XPSiT Charger.

If the charger does not go into the charge mode and a RED "Fault" LED is illuminate then make sure your batteries are have a voltage greater than 2VDC present and refer to the trouble shooting section on page 20 in the Owner’s Manual.
7 months ago
by
 - springfield, mo
Read all my Q&A (read all my Q&A)
0
0
8 months ago
by
 - Ocean City,MD
Read all my Q&A (read all my Q&A)
Answer this Question
0
0

Answers

Staff Answer
A: 
The unit has the battery type LED for selected battery type charge profile.
8 months ago
by
 - Springfield, MO
Read all my Q&A (read all my Q&A)
0
0
23next>>

Get help about this item from fellow customers.
Ask your questions. Share your answers.

21 Questions | 40 Answers
23next>>

Need Help? 7 days a week: 7am to 10pm CT or call 1.800.227.7776 anytime