Bass Pro Shops® Rod Holder Twin Pack
- Cam-lock mechanism
- Quick and easy vertical adjustment
- Padded lining protects rods
Additional side mounts and flush mounts can be purchased individually and can be found through item search at item number 38-425-978-00
Rated 3.8 out of 5 by 178 reviewers.
Rated 4 out of 5 by denecc Great Product For the price of these rod holders, they work awesome and are pretty functional. August 24, 2012
Rated 5 out of 5 by jbilyeu rod holders i got these for my boat and they worked great no complaints i hooked a big cat fish and the rod was getting yanked hard and the rod holder took it like a champ. it is worth the money. August 12, 2012
Rated 4 out of 5 by Work2Fish Great Value I purchased 2 two packs for my boat. Easy install and work great. I caught a 20lb carp and the holder held up great before I noticed the pole bending. Got distracted. I bought 4 additional mounts. They take a trip or two to get the hang of how they function but all in all I am very pleased with my purchase. August 7, 2012
Rated 1 out of 5 by gmac159 cheap! All I can say is you get what you pay for. the cost is cheap and so is the rode holder. the pin in the locking lever pulls through the plastic extremely easy. You can't get it tight enough to troll with or even think about hooking a large fish. I took a chance buying them on line sight unseen. Leason learned!!!! August 6, 2012
18 Questions | 91 Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
A:I own both types of reals and they both work well in the holder
A:Yes, these rod holders hold ALL types of rods and reels, spinning, baitcast, and my fly rods. I own all sizes and shapes, and there's nothing in my arsenal these won't hold, you'll love them!
Top 1000 Contributor
A:holds baitcasters great, spinning have to be upside down
A:With the flush deck mounts
A:Yes, you can mount them on any flat surface, and on any hull material; plastic, fiberglass, steel, aluminum, wood,... anything. And, you'll love the adjustments built in to them, and dollar for dollar, you'll love the value and quality even more!
A:Yes you can mount them. However it would be a good idea to put a Finish on the inside felt lining, It tends too wear out with the water and abbration.
Other than that a Great product.
Top 1000 Contributor
Images for this Answer
(click to see full-size image)
(Click anywhere inside this popup to close it)
Top 100 Contributor
A:you can mount them on a kayak i recomend having a pro doing it if you dont feel comfotable drilling holes into your kayak.
Details:I was wandering if the mounts come with the rod holders. it looks like they do. or do I have to order them seperate.
A:Yes, they have all you need to install them, including the mounting hardware, and you'll love the versatility as they have so much adjustment that you can mount them ANYWHERE in your boat, enjoy!
Top 1000 Contributor
A:Comes with side mounts and not the flush mounts.
A:Holders come with mounts and you can buy mounts seperately.
A:Yes. They come with side mount holders. If you want flush mount holders, they are sold separately for three bucks each.
A:The mounts come with it plus the screw to hold it on.
A:No T bolt that i have seen and you can purchase the side mounts for the holders.
A:not that im aware of yhey come as pictured
Details:who is the manufacturer and waranty details
Details:Both rod holders appear to be for the same side of boat. Did I miss something or is there a way to adjust for right and left?
A:Rod holders rotate 360 degrees so they work on either side
A:The holders rotate 360 degrees so you can mount them on either side of the boat
A:The rod holders and 360 degree adjustable, and can be used on either side of the boat.
A:Once you have installed the base and inserted the holder, lift the holder slightly and rotate in any direction that you want.
A:They mounted on both sides of my boat just fine.
A:The rod holders I purchased has the notch on the rod holder where it faces up and down the boat when you insert it into the holder. Therefore, it locks facing either way off the boat and works on either side of the boat.
A:yes they will, however, anything larger than a small bream will pull the rod (and holder) down.
A:They have nearly a full range of motion, but will not rotate directly vertical.
A:Yes, if not straight up and down they will get you very close.
A:Yes, up, down and side to side.
A:The base would have to be modified. They won't just clamp on.
A:No, these units are flush mount
A:If you have U bolts I think they would work just fine.
A:Yes, depending upon if you want to drill direct holes or use "U" bolts (2 1/2" L X 2"W) as I did. There is a grove on the flat side to assist rail mounting use.
A:I think you would have to make your own mounts probally. I had to for my pontoon
A:I am not sure about Attwood but they did not fit my Scotty mount. These holders were to small for my Scotty mount.
A:Yes.....thats what I purchased with these Rod Holders to mount on square rails on my Pontoon Boat.
A:NO...tried it wouldn't fit the atwood's that i have, the atwood is a bigger unit all the way round.
A:Yes the rod holder will fit in Scotty mounts, however, the Scotty Rod holder will not fit into the BP rod holder mounts
A:I have one Scotty Quick Draw holder and mount and these would not fit.
A:These seem to fit all conventional mounts.
A:They use standard threads. 3/8 for the L'il ones and 1/2 for the Pro ones so if Scotty uses standard threads, yes.