Bass Pro Shops® Rod Holder Twin Pack
Sale price:
Clearance price:
Starting at:
Sale starting at:
Clearance starting at:
Reg. price:
- Cam-lock mechanism
- Quick and easy vertical adjustment
- Padded lining protects rods
Additional side mounts and flush mounts can be purchased individually and can be found through item search at item number 38-425-978-00
Rated 3.8 out of 5Â by 180
reviewers.
Rated 1 out of 5Â by blade72 not happy
recieved a gift card for a birthday gift, never shopped here before so i thought i would try them. bout the only thing is the shipping is fast, the rod holders leave something to be desired. poorly made, either 2 right sides or 2 left sides, so one has to be mounted behind the other instead of across from each other. the screws are the wrong size, rod holders dont seem to be too secure in the base, and the construction is flimsy.
i would rather drop $20 a piece for some decent ones at the marina store.
October 20, 2008
Rated 4 out of 5Â by Crawldad Good price for 2
These rod holders work great for what they are, but they need to have a taller mast between the floor and the holder, because when installing them on the flush mounts, there isn't enough room to use them with the longer handle fishing poles.
August 23, 2008
Rated 3 out of 5Â by redear ok for the $
Could use some improvement on the cam lock handle, roll pin fell out during instalation, had to put small machine bolt and nut to take care of problem.
June 18, 2008
Rated 3 out of 5Â by GoldenBear Not very strong
The design is nice and the price is great, but the plastic is cheap and not very strong. I first used them to hold my rods while anchored. They worked fine. The second time I used them I trolled 16oz weights. About 2 seconds after I put my rod into the rod holder, it broke off. Luckily I was standing right there and I reached into the water to save my rod. Hey, what do you expect for something so cheap? I would not recommend them for trolling. If that is fine with you, then go ahead and get these.
May 22, 2008
18 Questions | 94 Answers
Outdoor Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
 Expand All
 Collapse All
(read all my Q&A)
Answers
Top 250 Contributor
A:Â
yes.
A:Â
I own both types of reals and they both work well in the holderA:Â
Yes, these rod holders hold ALL types of rods and reels, spinning, baitcast, and my fly rods. I own all sizes and shapes, and there's nothing in my arsenal these won't hold, you'll love them!
Top 1000 Contributor
A:Â
holds baitcasters great, spinning have to be upside downAnswers
A:Â
With the flush deck mountsA:Â
Yes, you can mount them on any flat surface, and on any hull material; plastic, fiberglass, steel, aluminum, wood,... anything. And, you'll love the adjustments built in to them, and dollar for dollar, you'll love the value and quality even more!A:Â
Yes you can mount them. However it would be a good idea to put a Finish on the inside felt lining, It tends too wear out with the water and abbration.Other than that a Great product.
Top 1000 Contributor
A:Â
I did.Images for this Answer
(click to see full-size image)
Top 100 Contributor
A:Â
you can mount them on a kayak i recomend having a pro doing it if you dont feel comfotable drilling holes into your kayak.Details:Â
I was wandering if the mounts come with the rod holders. it looks like they do. or do I have to order them seperate.Answers
Top 250 Contributor
A:Â
Yes they come together.A:Â
Yes, they have all you need to install them, including the mounting hardware, and you'll love the versatility as they have so much adjustment that you can mount them ANYWHERE in your boat, enjoy!
Top 1000 Contributor
A:Â
Comes with side mounts and not the flush mounts.A:Â
Holders come with mounts and you can buy mounts seperately.A:Â
Yes. They come with side mount holders. If you want flush mount holders, they are sold separately for three bucks each.A:Â
The mounts come with it plus the screw to hold it on.Q:Â
3 answers
i have a 2012 tracker boat. it has slots that rod holders slide in. do these come with a t-bolt and different base?
Answers
A:Â
No T bolt that i have seen and you can purchase the side mounts for the holders.A:Â
not that im aware of yhey come as picturedA:Â
No t-bolt but simple 2 lock in screw attachment points. Had this rig in my fiber Sea Skiff in Hawaii worked well if rigged high on a fiber inner hull side wall.Details:Â
who is the manufacturer and waranty detailsAnswers
Top 250 Contributor
A:Â
9"long x 1 1/4" wide.Details:Â
Both rod holders appear to be for the same side of boat. Did I miss something or is there a way to adjust for right and left?Answers
A:Â
Rod holders rotate 360 degrees so they work on either sideA:Â
The holders rotate 360 degrees so you can mount them on either side of the boatA:Â
The rod holders and 360 degree adjustable, and can be used on either side of the boat.A:Â
Once you have installed the base and inserted the holder, lift the holder slightly and rotate in any direction that you want.A:Â
They mounted on both sides of my boat just fine.A:Â
The rod holders I purchased has the notch on the rod holder where it faces up and down the boat when you insert it into the holder. Therefore, it locks facing either way off the boat and works on either side of the boat.Thanks.
A:Â
The mounts are for side mount,Answers
A:Â
yes they will, however, anything larger than a small bream will pull the rod (and holder) down.
A:Â
They have nearly a full range of motion, but will not rotate directly vertical.A:Â
Yes, if not straight up and down they will get you very close.A:Â
Yes, up, down and side to side.
Answers
A:Â
The base would have to be modified. They won't just clamp on.A:Â
No, these units are flush mountA:Â
If you have U bolts I think they would work just fine.A:Â
Yes, depending upon if you want to drill direct holes or use "U" bolts (2 1/2" L X 2"W) as I did. There is a grove on the flat side to assist rail mounting use.A:Â
I think you would have to make your own mounts probally. I had to for my pontoonAnswers
A:Â
I am not sure about Attwood but they did not fit my Scotty mount. These holders were to small for my Scotty mount.A:Â
Yes.....thats what I purchased with these Rod Holders to mount on square rails on my Pontoon Boat.A:Â
NO...tried it wouldn't fit the atwood's that i have, the atwood is a bigger unit all the way round.A:Â
Yes they will.Answers
A:Â
pretty certain they will not workA:Â
Yes the rod holder will fit in Scotty mounts, however, the Scotty Rod holder will not fit into the BP rod holder mountsA:Â
I have one Scotty Quick Draw holder and mount and these would not fit.A:Â
These seem to fit all conventional mounts.A:Â
They use standard threads. 3/8 for the L'il ones and 1/2 for the Pro ones so if Scotty uses standard threads, yes.
Get help about this item from fellow customers.
Ask your questions. Share your answers.
18 Questions | 94 Answers
