Bass Pro Shops® Locking Anchor Control System
Sale price:
Clearance price:
Starting at:
Sale starting at:
Clearance starting at:
Reg. price:
- Includes pulley lift and anchor lock
- Facilitates lifting, dropping and setting of river or mushroom anchors
- Accepts 1/4 to 7/16" anchor rope
The Locking Anchor Control system includes a pulley lift and anchor lock that allows easy lifting, dropping and setting of your river or mushroom anchor. Pulley accepts 1/4'' to 7/16'' anchor rope.
Rated 3.6 out of 5Â by 21
reviewers.
Rated 4 out of 5Â by SmallmouthMike Good For Price.
I read the other reviews, you do not need instructions. Anyone can figure this out in 10 min. If I can. It does work well with 3/8 or larger rope like in the other reviews. If your rope does get caught on the side of the pulley. just pinch the top, so there is no room to get in between the pulley and the aluminum. Yes they might break so buy a spare. I have a 14'11" Jon boat for the river, and I can lower and raise the anchor from the back seat.
April 25, 2010
Rated 5 out of 5Â by TurkeyHunter2 Does not take prisoners
Best turkey load around. Puts "the flop in turkey hunting".
March 25, 2010
Rated 3 out of 5Â by 1skeeter good product
once u figure it out it works great...the only problem i have is when the boat gets in different angle the rope jumps of the pulley but its ok once u figure it out i have 2 on my boat will replace when one breaks for the price its a deal
August 2, 2009
Rated 3 out of 5Â by fish1945 How it works
Product should have instructions, the way it works is: pull up on the rope to let anchor down, pull down to level or below and cam will catch rope. Pull way up and rope will lock open, pull down to let rope catch. Works pretty well, works better with larger (3/8 to 1/2 in) rope.
June 30, 2009
1 Question | 2 Answers
Outdoor Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
 Expand All
 Collapse All
(read all my Q&A)
Answers
A:Â
From the outside of the boat. Put the rope through the round anchor clamp hole and pull it all the way through until the anchor hangs about 3 inches below the anchor system.
Top 1000 Contributor
A:Â
Thread the line from the wheel side with the line retainer up, retainer keeps the line over the wheel. Continue pulling the line through towards you and through the line stop. The line stop,swinging piece, should be pointing towards you when you finally pull the line all the way and when you let go the line crimps under it.1 of 1
Get help about this item from fellow customers.
Ask your questions. Share your answers.
1 Question | 2 Answers
1 of 1
