Bass Pro Shops® Locking Anchor Control System
Sale price:
Clearance price:
Starting at:
Sale starting at:
Clearance starting at:
Reg. price:
- Includes pulley lift and anchor lock
- Facilitates lifting, dropping and setting of river or mushroom anchors
- Accepts 1/4 to 7/16" anchor rope
The Locking Anchor Control system includes a pulley lift and anchor lock that allows easy lifting, dropping and setting of your river or mushroom anchor. Pulley accepts 1/4'' to 7/16'' anchor rope.
Rated 3.6 out of 5Â by 21
reviewers.
Rated 5 out of 5Â by bearsfan034 Perfect replacement
bought to replace my aging achor locks. they were perfect and easy to change out.
July 12, 2011
Rated 3 out of 5Â by Rocketman39 Great product when it works.
I have a buddy I fish with that has something similar to this and when I finally got my own boat I thought this was a must have. I installed and have everything perfectly setup yet the problem I run into is that the locking mechanism tends to stick upright where the metal flap is to keep it from flipping over. I have tried pulling the rope slowly and even shaking the rope to knock it loose and back down but to no avail. I have tried a little tweeking to the stopper and have got it so it does it less now but it still happens almost half of the time. I basically have to go from the back of the boat to the front and knock it down by hand then I can get back to fishing. The pulley system works great so far but without being able to lock the rope in place this product is almost useless.
May 19, 2011
Rated 4 out of 5Â by ODHD A GOOD PRODUCT
HAD A PAIR OF THESE ON MY 10ft JON BOAT, SO WHEN I GOT THE NEW 14ft BOAT, I HAD TO HAVE A SET ON IT TOO. EASY TO MOUNT WHETHER YOU USE 1/4-20 SCREWS WITH NUT AND LOCK WASHER OR POP RIVETS. NYLON ROPE SEEMS TO GET IN BETWEEN THE ROLLER AND THE HOUSING, SO I WILL BE CHANGING TO REGULAR ROPE SOON.
March 30, 2011
Rated 5 out of 5Â by sammylee great product
I have been familiar with and have used the anchor lock for over twenty five years,It is by far the most effective and simple anchor holder out there.I have owned several boats over the years and have put these on them all.The concept is so simple yet so effective,It is one those things that you shake your head st and say,Why didnt I think of that!!!!!!!
March 9, 2011
1 Question | 2 Answers
Outdoor Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
 Expand All
 Collapse All
(read all my Q&A)
Answers
A:Â
From the outside of the boat. Put the rope through the round anchor clamp hole and pull it all the way through until the anchor hangs about 3 inches below the anchor system.
Top 1000 Contributor
A:Â
Thread the line from the wheel side with the line retainer up, retainer keeps the line over the wheel. Continue pulling the line through towards you and through the line stop. The line stop,swinging piece, should be pointing towards you when you finally pull the line all the way and when you let go the line crimps under it.1 of 1
Get help about this item from fellow customers.
Ask your questions. Share your answers.
1 Question | 2 Answers
1 of 1
